OnionBelt

From photo by Steven Diffey
https://photos.google.com/share/AF1QipO2td2z3T_FCjmclBeH-1vGUowK-5dEAuP0T-mddoal-6ttV4wVAKMTt5UHzES4lw?key=WkZsQUhhTFJZVnQwSGRQcjdjb0V4MFBsQUdyTlBB

Tommy Guerrero Jazz Cafe

Tester

The Roto Choir recreates both the rotating lower speaker and the treble rotor horn –the only way to attain that complex, multi-dimensional tone. In fact, the Roto Choir utilizes a specifically formulated SansAmp technology to deliver the entire signal chain –from the original tube power amp to the speaker and high-frequency rotor horn, to the microphone used to capture it. This is HD, 3D emulation.

The simple controls hide a wealth of options. Drive adds just the right amount of compression, harmonics and grit. Low and High sculpt the tube amp emulation with powerful EQ curves. The Fast/Slow footswitch allows users to ramp up, slow down or even stop the rotating speaker. There’s also a dedicated control to custom set the Top Speed of your rotor. Want to vary the intensity of the effect? Simply adjust the Position control to move the Roto Choir’s virtual mic closer or further from the horns. Other features include a biamped/single-speaker mode switch, stereo output and a Speaker Sim switch for direct recording.

Tech 21

Product Page

Review by The Gear Page

Review by bonedo

Review by Gitarre & Bass

Manual

Official Product Video

Demo by Brett Kingman

RotoChoir

PedalSafe Type C

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

Stefan Valenberghs

The Aqua-Puss Analog Delay MkIII delivers smooth vintage delay tones and tape-based echo with 20ms to 300ms of delay time.

Way Huge

Aqua-Puss MKII

PedalSafe Type WH3

QuickMount Type WH3

Pedal-Montageplatte für DUNLOP WAY HUGE SupaPuss Pedale

Pedal Mounting Plates for DUNLOP WAY HUGE SupaPuss pedals

Schutzabdeckung & RockBoard-Montageplatte für DUNLOP WAY HUGE SupaPuss Pedale

Protective Cover & RockBoard Mounting Plate For DUNLOP WAY HUGE SupaPuss pedals

Schutzabdeckung & universelle Montageplatte für DUNLOP WAY HUGE SupaPuss Pedale

 Protective Cover & Universal Mounting Plate For DUNLOP WAY HUGE SupaPuss pedals

Das Catalinbread Belle Epoch Delay-Effektpedal orientiert sich am Sound des legendären Maestro Echoplex EP-3, das in den 1970er Jahren zum Arsenal diverser Helden des Rock gehörte, darunter solche Namen wie Brian May, Jimmy Page, Eddie Van Halen, David Gilmour oder Eric Johnson. Sie setzten das Delay oft und gerne ein, neben dem warm klingenden Bandecho-Sound auch wegen seines Preamps, mit dem man einen Amp noch etwas heißer anfahren und zu etwas mehr Zerre überreden konnte.

 The Catalinbread Belle Epoch Tape Echo, has tape echo sounds so authentic you’d swear there was tape inside the pedal! Inspired by the Maestro Echoplex, EP-3 model, perhaps the most famous tape delay ever, the Belle Epoch features everything we love about the EP-3 in a small, maintenance free pedal format. We felt that a “tape echo” pedal was much more than just a standard digital delay with some “filtering” on the repeats. There are a lot of subtle and not-so-subtle traits of the Echoplex that needed to be implemented in order to be authentic. The preamp, the self-oscillation character, the ability to control the “record level” of the signal hitting “tape”, the wow and flutter, the way the repeats decay, the way the circuit interfaces with the amp and other pedals – all these things were important to get right. The original unit was used as a musical instrument unto itself and this is what we captured with the Belle Epoch.

Catalinbread

Review by Amazona 

Review by Bonedo 

Demo by Reverb 

Belle Epoch

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

The MXR Uni-Vibe Chorus/Vibrato delivers the same lush, chewy textures that players have used since the late '60s. Updated with modern gigging players in mind, this effect now it comes in a standard MXR housing—a fraction of the size and weight of the original—with true bypass switching.

With its simple three-knob interface, you can dial in the effect to your taste in short order. First, use the VIBE switch to select either Chorus Mode—dry signal mixed with pitch-shifted signal—or Vibrato Mode—only pitch-shifted signal. Then, use the LEVEL control to set the effect volume, the SPEED control to set the sweep rate, and the DEPTH control to set overall intensity.

Put the MXR Uni-Vibe Chorus/Vibrato on your board and expand your tonal palette.

Demo by jumdunlopusa

M68 Uni-Vibe Chorus/Vibrato [small box]

The EHX Oceans 11 is a compact, affordable pedal packed with advanced functionality and 11 reverb styles ranging from essential to exotic.

Electro-Harmonix

Oceans 11

PedalSafe Type A2

Schutzabdeckung & RockBoard-Montageplatte für ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & RockBoard Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Schutzabdeckung & universelle Montageplatte ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & Universal Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

M293 Booster Mini

The MXR Sugar Drive Pedal provides a diverse range of clear and transparent overdrive tones, from sauced up boosting to blown-tube distortion. It's based on a rare overdrive pedal that has acquired a mythical reputation among fanatical tone-seekers thanks to its unique circuit design.

The key elements of that circuit design are the Drive control and something called a voltage doubler. First, the Drive control on this pedal doesn't just increase the intensity of the overdrive pedal. It starts with your clean signal and then blends it with the overdrive effect as you turn it up, replicating the smooth transition of an amplifier going from clean to dirty. The voltage doubler increases overall headroom, which opens everything up nicely.

Review by Guitar World

Review by Hometone Blog

Demo by  Made by Miike

M294 Sugar Drive

Für 5-9 FX-Pedale - **622 x 142 mm / 24.49" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 9 FX pedals - **622 x 142 mm / 24.49" x 5.59"** - available with Gig Bag or Flight Case

jan roger hafsund

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Rectifier

ch ray

Line 6 HX Stomp ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Black

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Isen Ritchie

- Multi-Watt™ channel assignable power amp allows you to assign either 2 or all 4 EL-34 power tubes to each channel for power ratings of 50 or 100 watts of class A/B power via independent 50/100 watt power switches
- 4xEL-34, 5x12AX7, 2x5U4
- Fixed Bias
- 2 Independent Channels: Channel 1 = Fat Clean, Tite Clean, Crunch; Channel 2 = Crunch, Tite Gain, Fluid Drive
- Channel Assignable Dual Rectification with Recto Tracking™ (Diode or Tube Tracking)
- Independent gain, treble, mid, bass, presence & master controls per channel
- Bold/Spongy “Variac” switch
- Output Level control (over all channels when activated)
- Footswitchable Solo Level control (over all channels when activated)
- Fully Buffered FX Loop with Send Level Control (over all channels when activated)
- True “Hard” bypass switch that removes FX Loop, Output Level & Solo Level controls from signal path
- Switching jacks on back for channels 1, 2 & solo
- 2 button footswitch (Channel 1/2 & Solo)
Width: 25 1/2"

Mesa Boogie

Stiletto Deuce Stage II

Adzim Ezani

HX® One is a powerful stereo effect pedal in an ultra-compact enclose that easily fits onto any pedalboard. It features intuitive controls, 250+ effects taken from HX family processors, a unique Flux Controller, a jack for connecting an optional expression pedal or two footswitches, adjustable input impedance, MIDI capabilities, and a choice of true or buffered DSP bypass.

Demo by Line 6

HX One

Das Electro Harmonix Oceans 12 ist ein Stereo-Reverb-Pedal, das, wie der Name schon erahnen lässt, mit gleich 12 verschiedenen Reverb-Modi den Spieler beglücken möchte. Damit hat das Oceans 12 im Gegensatz zum seinem ebenfalls von uns getesteten Vorgänger, dem Oceans 11, noch einen Algorithmus mehr an Bord. Viel entscheidender ist aber die Möglichkeit, gleich zwei Reverbs parallel oder in Serie zu schalten, und das in Stereo.

The EHX Oceans 12 is the Oceans 11’s big brother with even more reverbs and functionality. It features two simultaneous, independent, stereo reverb engines, series and parallel control for the dual reverbs, 24 presets and advanced I/O allowing for stereo in/out or mono send/return with pre and post reverb options. The pedal also includes a new Tide Control for stereo image alteration, a Lo-fi Control, an infinite attenuation control and an input jack for external expression and 3-button footswitch control.

A Tails switch provides a choice of whether the reverb effect fades out naturally or stops immediately when the pedal is switched to bypass. In most settings the pedal is also capable of producing infinite reverb which can be played over with a different reverb effect.

The Oceans 12’s reverbs are:
• ROOM – two modes: reverb algorithms modeled after a lively room and a spacious performance hall
• SPRING – two modes: vintage 1962 Fender® 6G15 tube reverb emulation and the spring algorithm from the EHX Holy Grail
• PLATE – two modes: two emulations of the smooth, metal plate reverb often used in high-end recording studios during the 1960s and ‘70s
• REVERSE – two modes: a reverse reverb effect as well as true reversed echoes
• ECHO – three modes: a digital delay with various echo rhythms feeding into a plate reverb
• TREM – three modes: a classic, periodic volume envelope with various shapes applied to both the wet and dry mix of a hall reverb
• MOD – three modes: combinations of chorus and flange reverbs that create rich reverb tails
• DYNA – three dynamic, experimental reverb algorithms: swell, gate and duck
• AUTO-INF – three modes: auto-infinite reverb (w/optional chorus or flange) that “listens” to your playing and crossfades to a new reverb wash upon detection of newly struck notes.
• SHIMMER – two modes: two configurations of a rich octave-shifted reverb wash
• POLYPHONIC – two modes: two configurable bi-directional pitch shifts that add dimensionality to the reverb tail
• RESONANT – two modes: reverb excited by tunable resonators and configurable self-oscillating filters on the reverb tail

2 simultaneous, independent, stereo reverb engines
Series and parallel control for the dual reverbs
24 presets
Stereo in/out or mono send/return with pre and post reverb options
Tide Control for stereo image alteration
Lo-fi Control
Infinite attenuation control
Tap tempo to set your pre-delay time, echo time and more
Input jack for external expression and 3-button footswitch control
Power supply included

Product Page 

Review by PREMIER Guitar 

Review by AMAZONA 

Review by bonedo  

User Manual

Demo by Premier Guitar 

Oceans 12 Dual Stereo Reverb

David Litaba

MOD 11 Modulator

Nano Small Stone

Flavio Salcuni

It's active Treble, Bass ,Gain and Volume controls allow for limitless tone shaping. Added Gain switch for even fatter tones!. The RC Booster V2 offers a super transparent 20db+ clean boost and a +- 15db 2 band active EQ without ever compromising the integrity of the original TONE. It provides a solution to sound degradation, caused by long instrument cables and/or long effect chains between guitar and amp, by strengthening the original signal. True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery.

Xotic

Review by Humbucker Music

Demo by Peter Honoré

Demo by Buddy Blues

RC Booster V2

RockBoard

Mit dem neuen Kirk Hammett Cry Baby Wah kannst du jetzt den gleichen Killer-Wah-Sound wie Kirk haben. Entwickelt in enger Zusammenarbeit mit der Metal-Gitarren-Ikone selbst, wurde es akribisch abgestimmt und optimiert, um den Wah-Sound zu liefern, der Metal-Soli revolutioniert hat. Dies ist der legendäre Ton, den Kirk auf Tour mit seinem Cry Baby Rack Wah erzeugt. Dieses Pedal ist außergewöhnlich gleichmäßig in der Ansprache, wenn du dich von der Ferse bis zu den Zehen bewegst, mit einem dicken Top-End und vollem Dynamikbereich.

Now you can command the same killer wah tone as Kirk with the new Kirk Hammett Cry Baby Wah. Developed in close collaboration with the metal guitar icon himself, it has been meticulously tuned and tweaked to deliver the wah sound that revolutionized metal solos. This is the legendary tone that Kirk dials in on tour using his Cry Baby Rack Wah. Dunlop's engineers took Kirk's EQ, volume and tone settings—reflecting decades of blazing Cry Baby riffology—and reproduced them with exacting precision. This pedal is exceptionally even in response as you move from heel to toe, with a thick top end and full dynamic range. Dare to step into the footprint of a giant. Own a piece of the legend: the Kirk Hammett Signature Wah from Dunlop.

Dunlop

Review by SweetWater 

Demo by Guitar World 

Demo by SweetWater 

KH95 Kirk Hammett Signature Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Roberto Beretta

Sennheiser

XSW-D

DigiTech

Demo by Thoman's Guitars & Basses

Bad Monkey

The GRID SLAMMER™ overdrive pedal produces a variable boost in gain over a wide range with a classic, guitar-centric midrange bump that enhances many different playing styles. It’s a true overdrive “specialist” that covers an amazing array of what many top players consider the most expressive and musical ranges of overdrive. From sweet, subtle breakup to a harmonically smoldering overdrive that can both sting and sing, the GRID SLAMMER sets a new bar in legendary overdrive! 

Demo by EytschPi42

Grid Slammer

Featuring seven inspirational Lexicon® reverbs, the DigiTech® Polara will be the new architect of your soundscape, defining space and adding dimension to your playing. The Polara’s flexible reverbs cover a full spectrum, from the intimate warmth of “Room”, to the vast expansiveness of “Hall”, through time with the cosmic power of “Reverse”, and anchored by Lexicon’s revered “Modulated”, “Plate” and “Spring” reverbs. In addition to those classics, the Polara introduces the new “Halo” reverb. The “Halo” reverb with cascading octaves interspersed in the reverb decays will cast a heavenly glow over your tone. With its new, compact size and soft-touch vacuum-style footswitch, the Polara truly represents the latest evolution in DigiTech pedal design. We’ve put years of experience into every detail of its mechanical and sonic blueprint. The Polara offers independent Level, Liveliness, Decay and Type controls; Stereo Inputs and Outputs; a Soft Click Footswitch; and a Reverb Tails On/Off Toggle Switch. It is true bypass, and uses a 9V DC power supply to easily integrate into your existing pedalboard.

Review by bonedo 

Quick Start Guide

POLARA

Das Digitech Obscura Altered Delay Pedal gehört zu der Effektgattung, die als essentieller Bestandteil auf den allermeisten Effektboards zu Hause ist und entsprechend zahlreich auch in den unterschiedlichsten Ausführungen im Markt angeboten wird. Während in den letzten Jahren die Anhänger der Analogtechnik wieder vermehrt ihre geliebten Vintage-Delays mit Originaltechnologie finden konnten, versucht die digitale Fraktion, außer mit hoher Signaltreue, Programmierbarkeit und vielen weiteren mehr oder weniger alltagstauglichen Gimmicks, auch mit der möglichst originalgetreuen Nachbildung der legendären analogen Echoeffekte zu punkten.

The Obscura Altered Delay from DigiTech allows you to turn your delays upside down and inside out. The Obscura’s four delay types can be darkened, degraded and distorted on the fly with the stacked Tone and Degrade controls. Combine these controls with the Obscura’s Repeat/Hold feature and lose yourself in long, trippy, gurgling repeats or backwards-manipulated sonic mayhem. In addition to its Tone and Degrade controls, the Obscura features independent Level, Delay Mode and stacked Time and Repeats controls. Complimenting those versatile controls, the Obscura offers four excellent-sounding Analog, Tape, Lo-Fi, and Reverse types, Tap Tempo mode with Beat Divisions, Stereo Inputs/Outputs, a Delay Tails On/Off Switch and True Bypass circuitry. With its compact size and vacuum-style footswitch, the Obscura furthers DigiTech’s evolution in pedal design. We’ve put years of experience into every detail of its mechanical and sonic blueprint. The Obscura uses a 9V DC power supply to easily integrate into your existing pedalboard.

Review by Guitar 

Review by Guitarre&Bass 

Demo by ProGuitarShopDemos 

Demo by Gear4music

OBSCURA

The pxl-live is the newest member of the joyo pxl series programmable pedal controllers - pxl4, pxl8, pxl-pro. The pxl-live is a very powerful pedal controller. It not only has dual 4 channel outputs like the pxl-pro, and dual (relay)switch outputs for channel switching, it also has MIDI out. Programmable MIDI commands can be sent enabling you to control MIDI enabled devices such as: effect pedals, effects racks, keyboards or amps through the MIDI port. The pxl-live can send MIDI cc and MIDI program change commands at the same time and will allow “Hands free”control of your computer recording software. For musicians who own a lot of musical gear, the pxl-live will be the perfect pedal controller to make life easier. 

JOYO

Review by reddit /guitarpedals

PXL-LIVE Loop Switcher

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Éloi Deraiche

New Pedal Board

Keeley Kompressoren sind wohl die beliebtesten Boutique Kompressoren am Markt. Mit weit über 50.000 gebauten Kompressoren ist die Keeley Werkstatt wohl ein Experte auf den Gebieten Kompression, Limiting und Sustain. Keeley weiß ganz genau was es braucht um ein Instrument klingen zu lassen, als wäre es professionell aufgenommen worden. Sie wissen wie sie deine Gitarre im Mix ganz nach vorn stellen und sie wissen genau, was das Spielen zur wahren Freude macht. Keeley Compression macht’s möglich! Der Keeley Compressor Plus ist der nächste Schritt nach vorne in Keeleys Reihe an 2- und 4- Knob Kompressoren. Die neuen Features sind einfach und geradeaus. Es gibt einen einfachen Release Schalter, der speziell auf Single Coils und Humbucker getunt ist. Kein rätseln mehr, ob Attack und Release richtig eingestellt sind. Deine Humbucker haben all das Attack und den Punch den sie haben sollen! Das Keeley Team hat außerdem einen fantastisch klingenden Tone Regler kreiert, der die sensiblen Obertöne, die bei komprimierten Signalen oft verloren gehen, betont. Außerdem verfügt der Compressor Plus über einen Blend Regler, der das Kompressor Signal auf bis zu 50 % im Mix absenken, und so die Dynamikspitzen in deinem Spiel und somit deine Phrasierung erhalten kann, während du zudem das nötige Sustain bekommst. Der Keeley Compressor Plus bietet denselben fabelhaften Push an süßen Frequenzen, den du von älteren Kompressoren kennst, nun mit der nötigen Flexibilität für jedes Instrument.

The Keeley Compressor is the most popular boutique compressor in the world.  With well over 50,000 compressors built in the Keeley shop we have an expert understanding of compression, limiting, and sustain.  Keeley know what it takes to make an instrument sound like it’s been professionally recorded.  They know how to make your guitar jump from the mix. They know how to make it fun and easy to play.  Keeley Compression is how.  The Keeley Compressor Plus is the next true advancement in their 2 and 4 knob compressor line.  The new features are simple and straight forward.  Now there is a simple Release Switch that is tuned for single coils or humbuckers.  No more wondering if you have the attack or release set right.  Your humbuckers will have all the attack and punch that they should.  The Keeley team designed a gorgeous sounding Tone Control that emphasizes the most sensitive harmonics that can be lost in compression.  The Compressor Plus now sports a Blend Control that retains the peaks in your playing and more importantly the proper phasing of your guitar signal.  The Keeley Compressor Plus offers the same gorgeous push of frequencies and sweetening of tone that the old comps gave you, now with the flexibility to handle any instrument.

Keeley Electronics

Official Product Page

Keeley Compressor Plus - Demo Video - ProGuitarShop Demos

Keeley Compressor Plus - Demo Video - Livingroom Gear Demos

Review by The Gear Check

Review by AMAZONA

Compressor Plus

Electro Harmonix ist bekannt für seine vielen analogen Bodentreter. Der Memory Man ist dabei ein klassisches Eimer-Ketten-Delay, wobei es das in zwei ziemlich identischen Ausführungen gibt, welche sich eben nur in der maximalen Delay-Zeit und damit dem Preis unterscheiden.

For decades, the Deluxe Memory Man has been the industry bottom line for sweet organic delay and modulation. Prized by serious musicians, the Deluxe Memory Man became the definition of attitude and character that still leads the way to analog perfection.

Electro-Harmonix has now created the ultimate Deluxe Memory Man equipped with Tap Tempo, 1100mS of maximum delay time, Expression Control and an Effects Loop. Adding Tap Tempo ensures that you will always be in sync with the groove, wherever your performance takes you, while five Tap Divide subdivisions deliver rhythmic variation. The Expression Pedal Input provides real time control over Blend, Rate, Depth, Feedback and Delay. The Effects Loop lets you insert effects into your wet signal without changing your dry signal, making the EHX Deluxe Memory Man 1100-TT the most powerful analog delay ever designed.

Review by DelayDude

Demo by Curtis Kent 

Demo by shnobel

DELUXE MEMORY MAN 1100-TT

PedalSafe Type O

QuickMount Type O

Pedal-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Pedal Mounting Plates for FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Das OD-3 OverDrive Pedal steht in der Tradition der legendären BOSS Overdrives und bietet dem Gitarristen eine stark erweiterte Palette an sanften Overdrive-Sounds und eine verbesserte Ansprache, ohne das Original zu vernachlässigen.

Built in the tradition of the legendary BOSS overdrives, the OD-3 OverDrive pedal gives guitarists a greatly expanded range of smooth overdrive tones and improved response while staying true to the original.

BOSS

Review by Guitar Pedal X

Review by Reddit /guitarpedals

Demo by sonicstate

Demo by Jack Fossett

Demo by Michael Banfield

Demo by intheblues

OD-3 Overdrive

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Das MXR M225 Sub Machine Fuzz kombiniert die rauen Vintage-Töne des La Machine Fuzz mit einem grollenden Suboktav-Schaltkreis und bietet einen direkten Weg zu den klanglichen Grenzen des Heavy-Sounds. Es verfügt über Volume-, Tone-, Fuzz- und Sub-Regler, einen Octave-Schalter für einen Oktav-aufwärts-Fuzz-Modus und einen Series-Schalter, um das Suboktav-Signal direkt in den Fuzz oder parallel dazu für einen Split-Channel-Effekt zu leiten.

The Sub Machine Fuzz combines shaggy fuzz with a growling sub octave circuit—switchable between series and parallel modes—with an octave up fuzz mode for searing subterannean sounds.