andronik supersonik

Guitar amp pedalboard

Das leistungsstarke Atomic™ Isolated Power Supply wurde entwickelt, um den hohen Stromanforderungen der Effectrode-Röhrenpedale gerecht zu werden. Es verfügt über eine einzigartige „Soft-Start“-Spannungsfunktion, die das Aufblitzen der Röhrenheizfäden verhindert und die Lebensdauer der Röhren maximiert.
Wird mit einem länderspezifischen IEC-Netzkabel und vier DC-Stromkabeln geliefert.

The mighty Atomic™ Isolated Power Supply is developed to meet the high power requirements of Effectrode tube effects pedals. Includes a unique "soft-start" voltage capability, which eliminates tube heater filament flash and maximise the life of the tubes.\r\nSupplied with country-appropriate IEC power cable and four DC power leads.

Effectrode

Demo by Everything Guitar

Product Page

Manual

Atomic Power Supply

Tester

This little green wonder is the world’s smallest tube buffer pedal. Inside is a Sylvania pencil tube operating at 300V, which means the Glass-A™ can effortlessly handle massive signal levels and transients from piezo crystal and high-output active magnetic pickups without distortion for an incredibly open, natural and transparent sound.

Glass-A Triode Buffer

Der PC-2A ist ein echter Vintage-Studiokompressor in einer Stompbox – es gibt keine billigen VCA-Chips, Operationsverstärker oder Billigkomponenten im Signalpfad, der zu 100 % analog ist und auf einer handverlesenen Fotozelle, Polyester-Kopplungskondensatoren, Präzisionswiderständen (mit Silber-/Palladiumkontakten) und einer Sylvania N.O.S. (New Old Stock) 6111 Subminiaturröhre basiert, die mit echten Verstärkerplattenspannungen betrieben wird, und das alles auf einer speziellen versilberten Leiterplatte.
Die Röhrenschaltung liefert jede Menge Head-Room und ein sehr, sehr geringes Grundrauschen für herausragende Dynamik, wobei die Attack-Eigenschaften erhalten bleiben und gleichzeitig eine musikalische und natürliche Kompression erzeugt wird – der PC-2A hüllt Ihr Signal in Samt und verbessert Ihren Gitarrenklang, ohne ihm eine Halbleitersignatur aufzudrücken. Nützlich in Live-Situationen, um „Punch“ hinzuzufügen oder dünne Single-Coil-Tonabnehmer aufzumotzen, und unverzichtbar bei der direkten Aufnahme auf digitale Audio-Workstations (Computer), um hässliche vorübergehende Verzerrungsartefakte zu vermeiden, die moderne digitale Aufnahmegeräte bei Überlastung erzeugen.

The PC-2A is a true vintage studio compressor in a stompbox—there are no cheap VCA chips, opamps or budget components in the signal path which is 100% analogue and built on a hand selected photocell, polyester coupling capacitors, precision resistors (with silver/palladium contacts) and Sylvania N.O.S. (new old stock) 6111 sub-miniature tube operating at real amp plate voltages all on a special silver-plated printed circuit board.
The tube circuitry delivers stacks of head-room and very, very low noise floor for outstanding dynamics, preserving the attack characteristics while creating musical and natural compression—the PC-2A wraps your signal in velvet, enhancing your guitar tone without stamping a solid-state signature on it. Useful in live situations for adding ‘punch’ or fattening up thin single coil pickups and indispensable when recording direct to digital audio workstations (computer) to prevent nasty transient distortion artefacts that modern digital recording devices produce if overloaded. 

Demo by gilmourish

Demo by Mike Hermans

Review by musicradar

Review by Compressor Pedal Reviews

PC-2A Tube Compressor

The original DiscumBOBulator was often heralded as being the world’s best autowah/envelope filter pedal. So how do you improve a pedal that’s already flawlessly funky? Well, start out by making the filter-triggering even better and extend the dynamic range and feel. Now triple the headroom signal, so the pedal handles the red hot signals of active bass pickups and line level inputs like a piece of cake. Finally you add an independent 10dB boost that’ll make funky solos take flight instantly, and you have the new improved DiscumBOBulator V2.

Emma Electronic

Demo by Godlyke Inc.

Demo by  Maksim Sorokin

Review by Pedal of the Day

Review by Talk Bass.com

DiscumBOBulator v2

Demo by Joe Perkins

Review by Anatomy of Guitar Tone

Mercury Tube Fuzz

The Fire Bottle™ is an all-tube booster specially designed to enhance the tone of single coil pickups. With up to 30dB of gain on tap, this powerful boost pedal can push the input stage of a tube amp into beautiful breakup and rich overdrive, creating glassy, bolder, larger-than-life Stevie Ray Vaughan Strat® guitar sounds.

Review by Musiker-Board

Fire Bottle

The Blue Bottle™ Inductorized Booster pedal has been custom designed for blues/rock guitarist John Verity to enable him to achieve a fatter, more bluesy B.B. King ‘335’ tones from his Strat-type guitars. It’s the perfect vintage mid-boost—never too aggressive or over-the-top—for low output single coil pickups.

Review by Guitar World

Demo by John Verity

Official Product Video

Blue Bottle

The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making
Tape delays.
it is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.

T-Rex

Demo by Martin Klaja's Guitarchannel

Demo by Duskmos

Demo by T-Rex Effects

Review by The Gear Page

Review by GEOFF KING, mixdownmag.com.au

Replicator D'LUXE

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

BOSS

TU-3W Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Der RockBoard Pedalboard Drawer ist eine simple aber extrem effiziente Lösung zum Organisieren und Verstauen von optionalem Zubehör in einem RockBoard Pedalboard. Der Pedalboard Drawer wurde entwickelt, um Zubehör wie Kabel, Plektren, Wireless Systeme und vieles mehr im MOD Slot des Pedalboards aufzubewahren. Durch den zentralen Zugang auf der Front des Pedalboards bietet der Drawer einen sichereren, sauberen und einfach zugänglichen Platz zur Aufbewahrung direkt am Setup. Durch die intelligente Arretierung der rotierenden Schublade ist eine zusätzliche Sicherung nicht notwendig.

- rotierende Schublade für RockBoard Pedalboards
- intelligenter Drehmechanismus mit sicherer Arretierung
- für Zubehör, Kabel, Wireless Systeme, Plektren, etc.
- passt in die MOD-Slot Aussparung von RockBoard Pedalboards (außer RockBoard DUO 2.0, 2.1, und 2.2)
- Material: Verstärktes Polyamid
- inkl. Montagematerial und Werkzeug
- Maße (B x T x H): 175 x 84,5 x 47 mm
- Gewicht: 150 g
- schwarz
- Hinweis: Nicht kompatibel mit den 19" Rack Panel Single oder Double (1U) - Rack Mount for RockBoard MOD

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.

- rotating mounting drawer for RockBoard pedalboards
- intelligent swivel locking mechanism
- for accessories, cables, wireless systems, etc.
- fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3)
- material: reinforced polyamide
- incl. all mounting screws, counter nuts, and tools
- dimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"
- weight: 150 g / 0.33 lbs
- black
- Note: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MOD

Rotating Drawer for RockBoard Pedalboards

Die RockBoard® PowerMODs sind speziell entwickelte Class D Transistorverstärker mit denen Lautsprecherboxen direkt und ohne zusätzlichen Verstärker vom Pedalboard angesteuert werden können. Die PowerMODs bieten einen 3-Band EQ, eine schaltbare Cabinet Simulation für Fullrange Lautsprecher sowie eine Mute Funktion. Die PowerMODs können in den MOD Slots in allen RockBoard® Pedalboards (mit Ausnahme von DUO 2.0, 2.1 und 2.2) oder auf den Pedalboards von anderen Herstellern installiert und so Platz sparend in jedes denkbare System integriert werden.


- kompakter Verstärker für Pedalboards
- kann direkt auf allen RockBoard Pedalboards installiert werden, die mit einem MOD Slot ausgestattet sind, sowie auf Pedalboards von Drittanbietern
- Class D Transistorschaltung
- Leistung (@1% THD): 118 W an 4 Ohm / 70 W an 8 Ohm
- 3-Band EQ
- frontseitige Regler für Volume, Low, Mid, High
- frontseitiger Cab-Sim Schalter
- frontseitiger Mute Schalter
- frontseitiger 6,35 mm Lautsprecherausgang
- frontseitiger 3,5 mm Kopfhörerausgang
- frontseitiger 3.5 mm AUX IN Eingang für externe Audiosignale
- frontseitiger symmetrischer XLR DI Ausgang
- rückseitiger Anschluss für beiliegendes Netzteil
- rückseitiger Instrumenteneingang
- inklusive 220 - 240 VAC Netzteil, Ausgang 36 VDC, 4,16 A
- Abmessungen (L x B x H) 175 x 116 x 47 mm
- Gewicht 1,2 kg (einschließlich Netzteil)

The RockBoard® PowerMODs are specially designed Class D transistor amplifiers that can drive speaker cabinets directly from your pedalboard without an additional amplifier. The PowerMODs feature a 3-band EQ, switchable cabinet simulation for full-range speakers, and a mute function. The PowerMODs can be mounted directly into the MOD slot (available on all RockBoard® pedalboards except the DUO series) or onto pedalboards from other manufacturers, allowing for space-saving integration into any system.

- compact amplifier for pedalboards
- can be directly mounted on into all RockBoard pedalboards equipped with MOD slots or on third-party pedalboards
- solid-state design, class D amplifier circuitry
- power (@1% THD): 118 W at 4 Ohm / 70 W at 8 Ohm
- 3-band EQ
- front panel controls for Volume, Low, Mid, High
- front-mounted Cab-Sim switch
- front-mounted Mute switch
- front-mounted 6.35 mm (1/4") speaker output
- front-mounted 3.5 mm (1/8") headphone output
- front-mounted 3.5 mm (1/8") AUX IN input for external audio signals
- front-mounted balanced XLR DI output
- rear-mounted connection for included power supply adapter
- rear-mounted instrument input
- including 220 - 240 VAC power adapter, output 36 VDC, 4.16 A
- dimensions (L x W x H) 175 x 116 x 47 mm / 6.88" x 4.56" x 1.85"
- weight 1.2 kg / 2.65 lbs (including power supply)

Kompakter Pedalboard Verstärker

Compact Pedalboard Power Amp

analog

Die StageBug SB-2 ist eine kompakte passive Direktbox, die sich perfekt für aktive Bässe und Keyboards eignet. Sie ist klein genug, um in einem Instrumentenkoffer Platz zu finden, und verfügt über eine Stereo-Mono-Mischfunktion, um Mischpultkanäle einzusparen.

The StageBug SB-2 is a compact passive direct box that is perfect for active basses and keyboards, is small enough to fit inside an instrument case, and features a stereo to mono mix function to save mixer channels.

Radial Engineering

Demo by Want 2 Check

Demo by Chris Lang Music

Review by bonedo

Review by TalkBass

Quick Start Guide

Stagebug SB-2

Giordano Rivolta

Der CIOKS 8 Expander ist unser größter Schaltnetzteil-Extender und verfügt über 8 isolierte Ausgänge, die jeweils 9 V DC mit 660 mA liefern. Alle acht Ausgänge bieten vier wählbare Spannungen (9V, 12V, 15V und 18V).

CIOKS 8 is our largest switch-mode power supply extender and it features 8 isolated outlets which each deliver 9V DC with 660mA. All eight outlets offer four selectable voltages (9V, 12V, 15V and 18V).

CIOKS

8 Expander

Branislav Vukobratovic

Die Cioks DC7 Mehrfach-Stromversorgung für Effektpedale stellt im Vergleich zu anderen Geräten dieser Art jeder Menge Energie bereit. Und das in einem flachen Gehäuse, das sogar unter ein Pedaltrain Nano Board passt. Das stattliche Kraftwerk bietet laut Angaben des dänischen Herstellers bei 9 Volt massive 4620 mA Strom und wäre damit rein rechnerisch in der Lage, ca. 577 Tubescreamer-Pedale (!) in Betrieb zu halten.

If you use effects pedals, whether on stage or in the studio, running them from a high-quality power supply is essential to getting the best performance and lowest noise out of them. The best power supplies have regulated, electrically isolated outputs, and that gives the same electrical separation as when running the pedals from batteries — but without the obvious disadvantages! There are several excellent power supplies available that offer such features, but CIOKS have managed to come up with an incredibly compact solution, seemingly without compromising on quality or flexibility.

Review by

Review by bonedo 

Demo by The Pedal Zone 

Demo by CIOKS 

DC 7

Michael Hodgson

The EP-25K features a 25K Ohm potentiometer that is required by some devices compared to the 10K potentiometer in the Mission EP-1. The two isolated outputs can be used to control two effects simultaneously.

Mission Engineering

Demo by Sean Pierce Johnson

EP-25K Expression pedal

Expressionator

Lee Atkin

Willkommen bei Sie Easy Listening – Ihr neuer bester Freund für stilles Shredding! Mit seiner fein abgestimmten Vorverstärkerschaltung und der wundervoll klingenden analogen Verstärkersimulation liefert das Easy Listening dir einen kraftvollen, satten Sound ohne Latenz oder harsche digitale Artefakte. Es ist die perfekte Verbindung von Vintage-Sound und modernem Bedienkomfort – mit großzügigem Headroom und dem geringen Rauschen eines echten Röhrenverstärkers; gleichzeitig aber klein genug für die Hosentasche. Kein Herumorgeln in umfangreichen Menüs, kein umständliches Laden von Impulsantworten und auch sonst nichts, das sich zwischen Sie und Ihren Traum-Sound stellen könnte. Ob Sie dieses Teil nun als Kopfhörerverstärker oder als letzte Stufe vor dem Recording-Interface nutzt, um mal eben schnell und mühelos Aufnahmen ohne Verstärker zu machen: Wir sind überzeugt, dass dieser unkomplizierte Simulator eine wundervolle Ergänzung Ihrer Klangpalette ist!
Und wie der Name schon andeutet, ist die Bedienung des Easy Listening denkbar einfach: Es gibt nur einen Regler für die Ausgangslautstärke – das war’s. Intern wurde es sorgfältig abgestimmt, um die Seele eines der beliebtesten klassischen amerikanischen Gitarrenverstärker – eines ’65 Deluxe – mit all der harmonischen Komplexität einzufangen, die Gitarristen so lieben. Seine vollständig analoge Schaltung sorgt für einen schnörkellosen Sound mit satten Bässen, leicht abgesenkten Mitten und kristallklaren Höhen, die Ihr E-Gitarre zum Singen bringen.
Das Easy Listening wurde speziell für Gitarristen entwickelt, die viele Pedale verwenden. Es verfügt über einen hochohmigen Eingang (1 MΩ) und reichlich Headroom, sodass es vom Vintage-Fuzz bis hin zu modernen gestackten Gain Stufen mühelos jeden Sound-Wunsch erfüllt. Der hochauflösende, rauscharme AnalogTreiber (Class AB) AB sorgt dafür, dass jede Nuance Ihres Sounds zur Geltung kommt – sowohl bei flüsterleisen Kopfhörerlautstärken als auch beim Aufnehmen cooler Riffs in Ihrem hochgeheimen Kellerstudio.
Jedes einzelne Easy Listening wird von einem machtvollen Roboter und ganz wunderbaren Menschen in Akron im US-Bundesstaat Ohio (der ehemaligen Gummihauptstadt der Welt) zusammengebaut.

Welcome to Easy Listening—your new best bud for silent shredding! With its finely tuned preamp circuitry and sweet analog cabinet simulation, Easy Listening delivers a big, lush sound with zero latency and no harsh digital artifacts. Think of it as the perfect marriage of vintage tone and modern convenience, offering all the high headroom and low noise of an actual tube amp but small enough to fit in your pocket. No menu diving, no IR loading, and nothing else getting in-between you and your tone. Whether you are using this as a headphone amp or the final stage before your recording interface for quick and easy amp-less recording, we think you’ll find this no fuss simulator a delightful addition to your tonal toolbox!
As the name implies, Easy Listening is as simple as it can be to operate, just one control for output volume and that's it. Internally, it's meticulously voiced to capture the soul of one of our favorite classic American guitar amps—a '65 Deluxe—with all the harmonic complexity guitar players crave. Its all-analog circuitry provides a more immediate feel with rich low-end resonance, slightly scooped mids, and that crystalline top end chime that makes electric guitars sing.
Designed with guitarists that use a lot of pedals in mind, Easy Listening features a high 1 MOhm input impedance and ample headroom to handle everything from vintage fuzz to modern stacked gain stages without breaking a sweat. The high-fidelity, low-noise analog class AB driver ensures you'll maintain every nuance of your tone at whisper-quiet headphone levels or tracking sick riffs in your secret basement studio.
Each Easy Listening is built by a powerful robot and a whole bunch of delightful humans in the exotic former rubber capital of the world, Akron, Ohio USA.

EarthQuaker Devices

Official Product Page

EarthQuaker Devices Easy Listening - Demo

Easy Listening Analog Amp Simulator - EarthQuakerDevices

EarthQuaker Devices Easy Listening Analog Amp Simulator - Review

Easy Listening

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

ch ray

Say hello to the world’s most compact reorderable audio loop switcher.

A fully analog stereo loop switcher designed to break boundaries. 
Each stereo loop can be broken up into 2x mono loops with an Y-cable and in the looper used as 2x complete independent mono loops (Y-TRS-Cables). As these cannot be displayed in this tool (but often used to double the loops on big boards) we configured in this tool 3 stereo connections as 6x mono loops. 

ML10X is the answer for today's musicians.

Morningstar Engineering

Review by 

Demo by 

ML10X (5 Stereo Loop)

Paul De maio

MC8 Pro

On more subtle settings the Phaseomatic tube phaser pedal creates a beautiful, natural sounding vibrato (frequency modulation) and shimmering phasing effects, utilising exactly the same one- and two-stage “Cathodyne” tube circuitry used to in those incredible vintage Magnatone® amps. However, the Phaseomatic’s all-tube circuitry has two additional Cathodyne phase inverters, which allow it to generate a much richer, deeper vibrato and even intense, deep “tunnel” phasing as well as a host of cosmic and spacious sound effects heard on many 1950′s “B” science fiction movie soundtracks.

Phaseomatic Vacuum Tube Phaser

Das Voodoolab Giggity Overdrive/Distortion Pedal verfügt über eine Vielzahl von Regelmöglichkeiten, welche die Feinabstimmung des Overdrive/Distorition Sounds erlauben. Die einzigartige Klangregelung mit Bass (Body), Höhen (Air) und einem 4-Weg Tone/Gain Schalter ermöglichen ein sehr gutes Angleichen des Klangspektrums an den gewünschten Amp Sound.

Wie jedes Voodoo Lab Pedal verfügt das Giggity über einen True Bypass Fußschalter sowie eine Status LED Anzeige.

The Voodoolab Giggity overdrive/distortion pedal has a wide range of control options that allow you to fine-tune the overdrive/distortion sound. The unique tone control with bass (body), treble (air) and a 4-way tone/gain switch allow the sound spectrum to be adjusted very well to the desired amp sound.

Like every Voodoo Lab pedal, the Giggity has a true bypass footswitch and a status LED display.

Voodoo Lab

Review by Premier Guitar

Demo by Brett Kingman

Demo by John Nathan Cody

Demo by Premier Guitar

Giggity

Tom Gumley

The Echo Fix EF-P2 is a real Spring Reverb pedal that packs a huge sound into a small enclosure. The EF-P2 features a three-spring reverb tank, adjustable Spring Drive, Bass / Treble EQ controls, and Reverb Volume control. With a footswitch for reverb bypass and also a direct signal mute footswitch, the EF-P2 can also be used as an outboard effect in recording studios. The EF-P2 can accept audio signal from synths and other audio devices, not just guitar.

Echo Fix

Demo by Demos in the Dark

Demo by R.J. Ronquillo

Review by AMAZONA

Review by reddit /guitarpedals

EF-P2 Spring Reverb

The Delta-Trem™ authentically recreates the alluring, hypnotic tone and feel of vintage guitar amp tremolo in S-T-E-R-E-O! This is accomplished using vacuum tubes and an archaic, long forgotten electronic component known as a ‘Raysistor’, essentially a tiny filament lamp and photocell housed together in a small metal can. The combination of Raysistor and all-tube circuitry tube creates an exceptionally smooth, rich and musical tremolo effect that blends well with clean and overdriven guitar sounds. The true stereo signal path allows the Delta-Trem to operate as a mono tremolo with a single guitar amp or into two amps, where the sound ping-pongs between them creating a huge, 3-D, spacious tone.

Demo by DMTR Pedal Shop

Delta-Trem

Cited as a major influence by wah masters such as Hendrix, Clapton, and Vaughn, Buddy Guy helped establish the effect as part of the blues vocabulary. To honor his contributions we have created the Buddy Guy Cry Baby Wah, featuring the Fasel Inductor for a sweet and singing top end, and two distinct user selectable wah voices—choose "DEEP" for a big and throaty growl, or "BG" for Buddy's own warm and bell-like wah tone. Convenient side-mounted LEDs indicate which mode you are in, while a separate LED indicates effect on/off. Let your guitar sing the blues in style with the Buddy-approved polka dot graphics and custom signature tread.

Dunlop

Review by Simon Bradley, musicradar.com

Demo by Guitar World

BG95 Buddy Guy Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Roberto Beretta

Sennheiser

XSW-D

Ruben Shannon

The Effectrode® ‘LA-1A’ Leveling Amplifier is a high-end, studio-grade vacuum tube compressor in a pedal. Whisper-quiet operation and a wide, wide dynamic range make this tone-tool an unparalleled tone enhancer on stage and in the studio—its natural warmth and clarity are unmatched.

Review by CompressorPedalReviews

Demo by Electric Mojo Guitars

Review by loopersparadise

LA1A Levelling Amplifier

The real McCoy! The SR-71 Blackbird™ ‘Tube Tone Engine’ is a genuine all-tube preamp in a compact pedal. Designed for great versatility, the  SR-71 adds additional clean/drive/distortion channels to vintage/boutique guitar amps or works as a professional stand-alone direct recording tube preamplifier. The clean channel possesses a beautifully pure, ‘glassy’ character and audio circuitry within the drive channel is tuned to generate a rich, full-bodied and devastatingly smooth overdrive.

Review by Sound on Sound

Blackbird

Für 15-25 FX-Pedale, 6 MOD-Slots – zwei Ebenen - **826 x 498 mm / 32.52" x 19.61"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 6 MOD slots, two levels - **826 x 498 mm / 32.52" x 19.61"** - available with Gig Bag or Flight Case

analog-stereo mesa

Bruce Lambelle-Rudd

Der Stereo AB Input Switch v2 ist ein passiver Fußschalter, der einen einzigen Instrumenteneingang zu zwei separaten Verstärkerausgängen oder Effektwegen leitet. Mit True-Bypass-Schaltung und LED-Anzeigen für jeden Ausgang gewährleistet er geräuschloses, transparentes Umschalten ohne Signalverlust. Untergebracht in einem robusten Aluminiumgehäuse, benötigt er keine externe Stromversorgung.

The Stereo AB Input Switch v2 is a passive footswitch that routes a single instrument input to two separate amplifier outputs or effects chains. With true-bypass switching and LED indicators for each output, it ensures silent, transparent switching without signal loss. Housed in a rugged aluminum enclosure, it requires no external power.

Bright Onion Pedals

Stereo AB Input Switch v2

Christopher Garrison

CIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal. Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go. 

Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for instance four for a Neural DSP Quad Cortex and two outlets for a Line HX Stomp), allowing you to run more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable setup and gives you more options for connecting additional pedals.

Crux

GigRig

Gigrig Humdinger Manual (Jan 2023)

Humdinger Product Page

Humdinger

The Tube-Vibe™ is a no compromise, innovative and original re-design of the classic Uni-Vibe pedal. However, instead of transistors, the Tube-Vibe utilises vacuum tubes, photocells and a pulsating filament lamp to generate exceptionally rich, swirling chorus and vibrato effects.

Tube Vibe

TU-3S Tuner

DC-2W Dimension C (Waza Craft)

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

tube board

We took a challenge and went a step further by designing the most compact size, top sounding, all-feature tap tempo tremolo effect pedal nowadays!

Starla is a synthesis of two precisely combined electronics. It is a superb sound quality analog tremolo controlled by a versatile digital tap tempo microprocessor via optical technology – a light source and photocell.

Dawner Prince

Demo by  Pyramxe

Demo by Alberto Barrero

Demo by Curtis Kent

Review by Guitariste.com

Review by delicious audio

STARLA

Isaiah Pearson

Das Supa Funk ist die Weiterentwicklung unserer Funkzilla und
Funk-lite-Familie, mit einem reaktionsschnellen und
artikulierten Hüllkurvengenerator, erweiterten Reglern und vor allem dem neuen Color-Regler, der einen sekundären Tiefpassfilter einblendet. 
Von einem klassischen, knackigen Vintage-Funk-Bom-Chicka-Wow-Wow bis hin zu kehligen, vollen, satten und stimmlichen Filter-Sweeps mit nur einer Reglerdrehung.

The Supa Funk is the evolution of our Funkzilla and
Funk-lite family of pedals, featuring a responsive and
articulate envelope generator, expanded controls and most notably, the new Color knob that blends in a secondarylow-pass filter. 
Go from a classic snappy vintage funk bom-chicka-wow-wow, all the way to throaty, full, rich and vocal filter sweeps at the turn of a knob.

SolidGoldFX

Review by talkbass.com

Review by thegearpage.net

Review by basschat.co.uk

Review by musicradar.com

Demo by The Bass Channel

Demo by JayLeonardJ

Demo by  BassTheWorld.com

SupaFunk

Cameron Taylor

The CopperSound Passive ABY pedal is a simple and handy utility device designed to split one input into two separate outputs, or combine two separate inputs into one output. Being a Bi-directional Passive device, its applications are only limited by your imagination! Use it to run and organize your stereo rig, switch between two instruments on the fly, or even as a mute switch for silent instrument changes. To make connections simple, the footswitch washers are color-coordinated to their corresponding output jack. Since this ABY is a passive device, power is only required for the status LEDs.