Matteo Panin

Cardoon band

remi clairet

Marshall

Footswitch origin 20

Tester

Ein Regler, viele Möglichkeiten. Das Acapulco Gold ist eine „Ein-Knopf-Power-Amp-Distortion-Box“, welche die Endstufen-Verzerrungen eines Vintage Sunn Model T Verstärkers emuliert. Das Acapulco Gold interagiert perfekt mit Volume- und Tone-Potis der Gitarre und klart beim Zurückdrehen etwas auf. Wer seinen Röhren-Amp zusätzlich zum „Sunn-Model-T-Kick“ auch boosten möchte, liegt beim Acapulco Gold genau richtig. In erster Linie erzeugt das Pedal jedoch heftige Distortions bis hin fast zum Fuzz und kann mächtig viel Pegel erzeugen! Das Pedal reagiert sehr dynamisch auf die Spielweise. Das Acapulco Gold verfügt über True Bypass und wird in Handarbeit in Akron, Ohio un den USA hergestellt.  

Das Acapulco Gold V2 verfügt über einen geräuschlosen, relais-basierten Soft-Touch Fußschalter. Audiosignale haben keinen Durchgang, wenn das Gerät nicht mit Strom versorgt wird.

One knob, many possibilities. The Acapulco Gold is a “one knob power amp distortion box” based on the vibe of a cranked Sunn Model T. The Acapulco Gold interacts perfectly with the Volume and Tone controls of the guitar cleaning as they are rolled down. For those who would like to give their tube amps a “Sunn Model T” kick, the Acapulco Gold is the perfect choice. However, the pedal can produce aggressive distortion sounds in the verge of Fuzz. It responds very dynamically to the playing style. The Acapulco Gold features True Bypass and it’s hand built in Akron, Ohio in the USA. 

The Acapulco Gold V2 uses silent relay-based soft touch switching. Audio will not pass without power.

EarthQuaker Devices

Official Product Page

Manual

EarthQuaker Devices Acapulco Gold V2 - Official Demo

EarthQuaker Devices Acapulco Gold V2 - Review by Amazona [DE], [12-2020]

EarthQuaker Devices Acapulco Gold - Review by Gitarzysta [PL], [01-2020]

Acapulco Gold

PedalSafe Type B

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für Standard-Einzelpedale

Protective Cover & RockBoard Mounting Plate For Standard Single Pedals

Schutzabdeckung & universelle Montageplatte für Standard-Einzelpedale

Protective Cover & Universal Mounting Plate For Standard Single Pedals

Oft kopiert aber nie erreicht, rangiert das schwer zu findende, originale, Phase 90 bei den Sammlern alter Bodentreter ganz weit oben. Das Original - seit der Gründung der Firma Dunlop bis in die späten 70er Jahre erhältlich – definierte den klassischen Phase Shifter Sound und war in allen Musikstilen zu hören, egal ob Hard Rock, Jazz-Fusion oder Funk-Hits. Der nach dem Kultpedal der Firma designte Phaser kommt puritanisch mit einem Regler aus, über den der Phaser-Speed einstellbar ist. Eine rote LED über dem stabilen Fußschalter zeigt den Schaltstatus an. Das massive Spritzgußgehäuse verfügt über jeweils 1/4" Klinke In- und Out-Eingänge. Betrieben wird der Kulttreter mit einer 9V Batterie, die in einem leicht zugänglichen Batteriefach auf der Unterseite Platz findet. Es ist erhältlich in der ursprünglichen orangenen Farbe.

This device has found its way into many of Eddie Van Halen's recordings, adding a shimmery velocity to lead passages or a more dramatic swoosh to muted strumming. Not just for guitars; it works well with bass, keyboards and even vocals. Vary the speed from a subtle, long cycle to a fast, watery warble...and myriad vintage vibrations in between. Power: Single 9 volt battery or Dunlop ECB-003 AC Adapter - Controls: Footswitch toggles effect on/bypass (red LED indicates on) Speed knob varies rate of phase sweep

Product Page

Review by Guitar Player

Review by bonedo

Demo by Reverb

Official Product Video

M101 Phase 90

Der Baby Tuner ist ein sehr präzises und gleichzeitig kompaktes Tunerpedal. 
Es funktioniert sowohl mit E-Gitarre, E-Bass, als auch mit Elektroakustikgitarre. Auch 7-Saiter Gitarren und 5-Saiter Bässen lassen sich mit dem Baby Tuner problemlos stimmen.
Das Display mit seinen 108 extra hellen LEDs lässt sich selbst in heller Umgebung und auch bei direkter Sonneneinstrahlung gut ablesen.

A high precision tuning micro pedals, can be accurate to 1 points. 
Works with most Electric or Electro-acoustic instruments including seven string guitar or five string bass.
Display Uses 108 high brightness LED's and is visible even in strong light or sun.
Very small and compact design.

MOOER

Demo by LAAK MUSIC STORE

Demo by Andrew Siemon 

Demo by  Backline Distribution

Review by yournextguitar.com

Review by effectsdatabase.com

Review by musiker-board.de

Review by audiofanzine.com

Baby Tuner

PedalSafe Type K1

QuickMount Type K

Pedal-Montageplatte für Mooer Micro Series Pedale und ToneX One

Pedal Mounting Plate For Mooer Micro Series Pedals and ToneX One

Schutzabdeckung & RockBoard-Montageplatte für MOOER Micro Series Effektpedale

Protective Cover & RockBoard Mounting Plate for MOOER Micro Series effect pedals 

Schutzabdeckung & universelle Montageplatte für MOOER Micro Series Effektpedale

Protective Cover & Universal Mounting Plate For MOOER Micro Series effect pedals 

This Cry Baby Wah packs three different wah voicings to cover most of your tonal needs—Low, Vintage, GCB95—into a housing that's half the standard size and features true bypass switching.

Dunlop

CBM95 Cry Baby Mini Wah

Beim Hoof Fuzz hat sich EarthQuaker Devices vom klassischen, „russischen“ Big Muff Pi inspirieren lassen. Das Hoof Germanium/Silizium-Hybrid-Fuzz erzeugt ein natürliches und obertonreiches Sustain. Das Klangspektrum reicht von dreckigem Overdrive bis zu monströsem Fuzz. Der Shift-Regler verändert als „Geheimwaffe“ die Frequenz-Ansprache des Tone-Reglers, ausgehöhlt klingende „Scooped-Mids-Fuzz-Sounds“ sind hiermit ebenfalls möglich. Das Hoof Fuzz ist voll analog aufgebaut, verfügt über einen True Bypass und wird in Handarbeit in Ohio/USA hergestellt. Das Hoof V2 verfügt über einen geräuschlosen, relais-basierten Soft-Touch Fußschalter. Audiosignale haben keinen Durchgang, wenn das Gerät nicht mit Strom versorgt wird.

The Hoof Fuzz is based on character of the classic green Russian muff. The Hoof germanium/silicon hybrid fuzz delivers a smooth, natural and harmonically rich sustain. It is capable of creating everything from dirty and organic overdrive to monstrous fuzz madness. The Shift control is its secret weapon of the Hoof. It changes the frequency response of the tone control, primarily on the treble side, making possible hollow sounding “scooped mids fuzz tones”. The Hoof features all analog operation and True Bypass. Hand built in Ohio, USA. The Hoof V2 uses silent relay-based soft touch switching. Audio will not pass without power.

EarthQuaker Devices Hoof Fuzz V2 - Official Demo

Review by Music Radar

Review by Guitar Muse

Hoof

Stone Deaf Effects

PDF-2

Kurt Cobain hatte es, Satriani hat es und wahrscheinlich auch Ihr Nachbar!
Das BOSS DS-1 ist ohne Zweifel eines der berühmtesten Verzerrungspedale auf dem Markt.
Seit den späten 70ern und bis heute bietet dieses kleine orangefarbene Pedal eine komprimierte Verzerrung im britischen Stack-Stil mit einem einfachen Bedienlayout – Verzerrung, Ton und Pegel.

Das BOSS DS-1 ist kein subtiles Pedal, aber auch kein brutales. Es behält seine Eigenschaften mit den meisten Arten von Tonabnehmern und ist wirklich ein großartiges Pedal für Anfänger und Profis gleichermaßen.
Vergleichen Sie diese Vintage-Version mit den anderen, um zu hören, ob Sie einen Unterschied feststellen können!

Kurt Cobain had it, Satriani has it, and probably your neighbour too!
The BOSS DS-1 is without a doubt one of the most famous distortion pedals out there.
Since the late ’70s and until today, this little orange pedal offers a compressed, British stack style distortion with an easy control layout – Distortion, Tone and Level.

The BOSS DS-1 is not a subtle pedal but not brutal either, it retains its characteristics with most type of pickups and it is really a great pedal for beginners and pros alike.
Compare this vintage version against the others too hear if you can tell any difference!

BOSS

Demo by Boechler Guitars and Repair

Demo by shnobel

Official Website

Review by BOSS

Review by The Gear Page

Review by Electrosmash

Review by Tone Home

Manual download

DS-1 Distortion (Vintage)

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

The ARP-87 is a compact, feature-rich delay, packed with a large pallet of inspirational delay tones. Featuring four main algorithms, digital, analog, lo-fi, and slap back, the ARP-87 can cover some serious ground in the world of echoes.

The Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs. The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped, and murky, to strait AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for smoking chicken pickin’ runs. With other features like our smart bypass switching, and momentary knob ramp, the ARP-87 provides endless creative opportunities that are waiting to be explored. 

Walrus Audio

Demo by Rabea Massaad

ARP-87 Multi-function Delay

PedalSafe Type B2

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Schutzabdeckung & RockBoard-Montageplatte für WALRUS ARP-87 & Monument V2 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS ARP-87 & Monument V2 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS ARP-87 & Monument V2 Pedale

Protective Cover & Universal Mounting Plate For WALRUS ARP-87 & Monument V2 pedals

Für 5-9 FX-Pedale - **622 x 142 mm / 24.49" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 9 FX pedals - **622 x 142 mm / 24.49" x 5.59"** - available with Gig Bag or Flight Case

Christopher Kang

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

My Board Gen. 7.1

Left

Right

Teeratai Kaewmanee

Cabzeus is a algorithm-based  speaker - cabinet - miking  simulator system. Connected direct to your gears this device enables you to obtain the sound of a miked-guitar amp cabinet without the hassle of miking your cabinets. Extending this basic function, we’ve built into Cabzeus a plethora of unique and powerful features that goes beyond simple speaker simulations.

GFI SYSTEM

Demo by ProGuitarShopDemos

Cabzeus Stereo

CONTROL ANYTHING WITH MIDI
​
The MC6 is a fully programmable controller, capable of sending up to 16 different MIDI messages per switch.

MIDI messages can be sent simultaneously, or triggered separately by performing different actions. This gives you precise and customizable control with just one switch.

With 30 banks of 6 switches in a compact low-profile chassis, the MC6 sits comfortably on any pedalboard, meeting the needs of even the most demanding musician.

Morningstar Engineering

Review by Six String Sensei

Review by Musiker-Board

Manual Page

MC6 MKII

This very clever design delivers a very clean, quiet, low impedance signal, and delivers a tone which is vibrant and natural without sounding harsh the way some buffers can. 

GigRig

GRUMPYBOT BUFFER

Giordano Rivolta

Der CIOKS 8 Expander ist unser größter Schaltnetzteil-Extender und verfügt über 8 isolierte Ausgänge, die jeweils 9 V DC mit 660 mA liefern. Alle acht Ausgänge bieten vier wählbare Spannungen (9V, 12V, 15V und 18V).

CIOKS 8 is our largest switch-mode power supply extender and it features 8 isolated outlets which each deliver 9V DC with 660mA. All eight outlets offer four selectable voltages (9V, 12V, 15V and 18V).

CIOKS

8 Expander

Branislav Vukobratovic

Die Cioks DC7 Mehrfach-Stromversorgung für Effektpedale stellt im Vergleich zu anderen Geräten dieser Art jeder Menge Energie bereit. Und das in einem flachen Gehäuse, das sogar unter ein Pedaltrain Nano Board passt. Das stattliche Kraftwerk bietet laut Angaben des dänischen Herstellers bei 9 Volt massive 4620 mA Strom und wäre damit rein rechnerisch in der Lage, ca. 577 Tubescreamer-Pedale (!) in Betrieb zu halten.

If you use effects pedals, whether on stage or in the studio, running them from a high-quality power supply is essential to getting the best performance and lowest noise out of them. The best power supplies have regulated, electrically isolated outputs, and that gives the same electrical separation as when running the pedals from batteries — but without the obvious disadvantages! There are several excellent power supplies available that offer such features, but CIOKS have managed to come up with an incredibly compact solution, seemingly without compromising on quality or flexibility.

Review by

Review by bonedo 

Demo by The Pedal Zone 

Demo by CIOKS 

DC 7

Origin Effects

RevivalDRIVE

MIDI SPLITTY™ ist ein MIDI Splitter / Repeater zur Verstärkung, Pufferung und Wiederholung von MIDI-Signalen für lange Kabelwege und Pedalboards mit mehreren MIDI-Geräten. Das Splitten und Wiederholen deines PedalBoard MIDI-Signals war noch nie so einfach und zuverlässig! Die Konstruktion von Master Control und MIDI Splitty ist kugelsicher: Du hast drei gut gepufferte und ultra-solide MIDI-Ausgänge. MIDI Splitty splittet und wiederholt alle eingehenden MIDI-Befehle an seinen Ausgängen und stellt so die Integrität der MIDI-Daten sicher, ohne sich Gedanken darüber zu machen, ob durch die Verkettung mehrerer MIDI-Pedale eine Latenz entsteht oder nicht. MIDI Splitty ist ein perfekter Begleiter für das Routing von MIDI zu verschiedenen Pedalen und anderen Instrumenten. MIDI Splitty bietet eine einzigartige Möglichkeit, mehrere MIDI-Pedale verschiedenster Hersteller zu synchronisieren, die es bisher noch nicht gab.

MIDI SPLITTY™ is a MIDI Splitter / Repeater designed to amplify, buffer, and repeat MIDI signals for extended cable runs and pedalboards with multiple MIDI devices. Splitting and Repeating your PedalBoard MIDI Signal has never been easier or more reliable! The build of both the Master Control and MIDI Splitty is bulletproof. You've got three well-buffered and ultra-solid MIDI outputs. MIDI Splitty splits and repeats all incoming MIDI messages to its outputs, ensuring the integrity of the MIDI data without concern about whether or not any latency is being introduced by chaining together multiple MIDI pedals. MIDI Splitty is a perfect companion for routing MIDI to various pedals and other instruments. MIDI Splitty, offers a unique way to sync multiple MIDI pedals from a wide range of pedal makers that has never before been accomplished until now. 

Molten Voltage

Demo by Step Audio

MIDI Splitty

Amazingly powerful and ultra-versatile, GT-1000CORE delivers the most complete guitar and bass processing experience available in a single stompbox. The full DSP muscle of the flagship GT-1000 lives inside this mini juggernaut, driving class-leading sound quality, advanced AIRD technology, 24 simultaneous effects blocks, and over 140 unique amp/effect types for unlimited creative expression. GT-1000CORE fits into any pedalboard setup and works equally well as a standalone processor for playing live and in the studio. And with flexible I/O and vast control support, it’s right at home as the core of any rig.

Review by reddit /guitarpedals

Review by guitar pedal X

Demo by  Bernd Kiltz - Gitarrenvideos

GT-1000 CORE

DC-2W Dimension C (Waza Craft)

The Heavy Menace is the most versatile distortion pedal we’ve ever created.  It’s an evolution of our original Heavy with new features and a compact enclosure. 

In addition to the original Heavy and Heavier modes, the Heavy Menace adds a new Lite(ish) mode, covering any high-gain sound from classic hard rock to searing modern metal.  

Empress Effects

Review by delicious audio

Demo by LambChopper678

Demo by Sonic Drive Studio

Heavy Menace

The OCD was the first pedal to use Mosfets as clipping devices. Another first was their configuration as "hard clippers connected to v-ref" instead of to ground, as was the norm. These things contribute greatly as to why the OCD has such touch-sensitivity...why they react so well when the strings are hit hard or soft, and why they sound & feel different than all other pedals out there, 90% of which are just slight tweaks of the Tube Screamer. 

Fulltone

Demo by That Pedal Show

Demo by intheblues

The Story of Fulltone OCD

PedalSafe Type FT1

QuickMount Type FT1

Pedal-Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Pedal Mounting Plate for FULLTONE OCD & 69 MK2 pedals

Schutzabdeckung & RockBoard-Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Protective Cover & RockBoard Mounting Plate For FULLTONE OCD & 69 MK2 pedals

Schutzabdeckung & universelle Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Protective Cover & Universal Mounting Plate For FULLTONE OCD & 69 MK2 pedals

Simon Lo

HIDE&SEEK is a very convenient item with two pedal functions.
There are two models, Bright Horse and TSH-10, inside.
The left side is equipped with a KLON motif bright hose, and the right side is equipped with a Japanese TS10 motif.

The pedals are designed to connect two in series, but you can switch between the front and rear pedals with the switch on the front.
Each of the two pedals has a buffer on/off.

With this function, you can have a wide variety of sound variations even with two pedals.
For example, set the buffer to Bright Hprse and use only TSH10.You can choose to place the buffer in front or behind the TSH10 by simply flipping the front/rear switch.This has very surprising effects.

HTJ Works

Demo by Iga Massardi

Demo by Brett KIngman

HIDE&SEEK -Dual Overdrive

MXR knows phasers. The Phase 90's compact size, superior construction, and refined sound put MXR on the map, and it set the standard by which all other phasers are judged. Two years later, MXR released the Phase 45—a mellower version of the effect favored for its ability to easily blend into a band's mix. Now, you can get both iconic circuits in a single pedal while tightening up your pedalboard at the same time. The Phase 95 combines the Phase 45 and Phase 90 circuits in a mini housing with about half the footprint of a standard MXR pedal. The 45/90 switch toggles between the Phase 45 mode's subtle two-stage phasing and the Phase 90 mode's more pronounced four-stage phasing, while the Script switch toggles between two phasing styles. The Phase 95 is set to modern style phasing by default, which relies on feedback to create light harmonic distortion and gives the effect a more accentuated swoosh. Engaging the Script switch removes feedback for a lusher, more subdued sound with higher headroom and greater clarity. The familiar Speed control sets the rate of the effect. The Phase 95 may be small, but it's full of rich phase tones, and it'll take a beating on the road.

Product Page 

Product Manual 

MXR Phase 95

M290 Phase 95

David Litaba

The Timmy Overdrive provides a versatile range
of overdrive tones that enhance the natural sound
of your guitar and amp setup. With three different
clipping options and ingeniously configured Bass
and Treble controls, this pedal offers players a ton
of options to make the most of their playing and
recording experience.

Review by guitarguitar

Demo by Blake Hall

Demo by Audiofanzine

Demo by emit works

Demo by Gear4music

CSP027 TIMMY OVERDRIVE

PedalSafe Type L

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & RockBoard Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Schutzabdeckung & universelle Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & Universal Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Kim Ulmer

Der Westminster Effects Buffered Splitter ist eines der nützlichsten Pedale überhaupt. Nutze es am Anfang deiner Signalkette als regulären Buffer (der nebenbei fantastisch klingt), in der Mitte deiner Signalkette, um von Mono auf Stereo zu wechseln ohne dabei deine Obertöne zu verlieren, oder am Ende deines Pedalboards für ein Dual-Mono Setup ohne für jedes Pedal ein zusätzliches Kabel zu brauchen.

The Buffered Splitter is one of the most useful pedals. Use it at the beginning of your chain as a regular buffer and use just one output (Which still sounds fantastic), throw it in the middle of your chain to go stereo without killing your high end, or even throw it at the end of your pedalboard to run dual mono without having to run an extra cable for every effect.

Westminster Effects

Buffered Splitter

Der BLOOM von Jackson Audio ist ein umfassender Dynamikprozessor, der Gitarristen eine bisher unerreichte maximale Kontrolle über die Klangdynamik ermöglicht. Der BLOOM v2 – MIDI bietet alle Vorzüge unseres ursprünglichen BLOOM und erweitert ihn um MIDI-Funktionalität! Der Bloom ist ein dreiteiliges Gerät, das die Dynamik des Instruments mithilfe präzise abgestimmter optischer Kompressions-, Entzerrungs-, Boost- und Sustain-Schaltungen beeinflusst, die separat oder zusammen aktiviert werden können.

The BLOOM from Jackson Audio is a comprehensive dynamic engine that is designed to give guitarists maximum dynamic tonal control in ways never before possible. The BLOOM v2 – MIDI takes everything people love about our original BLOOM and updates it with MIDI! A three-fold device, the Bloom manipulates the dynamics of the instrument by way of precisely tuned optical compression, equalization, boost and sustain circuits which can be activated separately or in tandem with each other.

Jackson Audio

Review by Compressor Pedal Reviews

Demo by EytschPi42

Demo by Jackson Audio

Bloom v2 MiDi

What do the tones of renowned guitarist such as Page, EVH and Johnson have in common? They all used the legendary echo machine EP-3 as a pre-amp. We've captured that magic in a new Xotic Effects pedal, the EP Booster. We've used the highest quality parts available with a discrete FET design and low impedance output, the EP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies, and EQ settings. A simple pure boost that pays reverence to the magical EP-3 and captures the celebrated tones of the world's most famous players. The EP-Booster,great tone starts here !

EP Booster

Hoof by EarthQuaker Devices