andronik supersonik

b-ASS-tube

Tobias Elliott

The Canvas Power HP allows you power the thirstiest of modelers and pedals with a massive 3A (three Amp, or 3,000mA) output. The HP also has 3 isolated power outputs delivering up to 500mA of clean power at 9v. The 3A output can also switch between 9V and 12v for powering high-voltage pedals.

Walrus Audio

Product Page

Review by musicradar

Review by Guitar.com

Review by gearnews.de

Manual

Official Product Video

Demo by Mark Johnston

Canvas Power HP

Janez Jelen

Introducing a brand new version of the Oracle - a single channel, vacuum tube pre-amplifier inspired by the iconic Portaflex Bass amps of the 1960's. The buffered 1/4" output provides ample gain to feed a modern power amp or the line input of your recording interface. For use as an effect pedal, simply turn down the Master control (all knobs at noon is unity gain). The DI output features a high quality output transformer, with Mu Metal shielding for ultra quiet operation.

The heart of the Oracle is a single 12AX7 tube, selected for low noise and good tone, and fed by a 300VDC power supply.

Arkham Sound

Review by CompressorPedalReviews

Demo by Low-End Reviews

Review by reddit /basspedals

Review by Bass Musician Mag

Review by Talk Bass.com

Oracle

Ruben Shannon

The Effectrode® ‘LA-1A’ Leveling Amplifier is a high-end, studio-grade vacuum tube compressor in a pedal. Whisper-quiet operation and a wide, wide dynamic range make this tone-tool an unparalleled tone enhancer on stage and in the studio—its natural warmth and clarity are unmatched.

Effectrode

Demo by Mike Hermans

Demo by Electric Mojo Guitars

Review by loopersparadise

LA1A Levelling Amplifier

Tester

The micro-Thumpinator is a bandwidth optimizer designed for bass guitar. It removes the low frequency signals that are outside the range of notes produced by the instrument.

Infrasonic frequencies cannot be reproduced by standard bass cabinets but they often make amplifiers clip, especially when they are set to boost the lower frequencies. The Thumpinator filters the signal content optimising the energy delivered by the amplifier. Low-frequency clip is substantially reduced and the sound is tighter especially at high volume levels.

The micro-Thumpinator accepts instrument and line level signals. It can be used between preamplifier and amplifier, between bass and amplifier or anywhere in the effect chain (line or instrument level). It can also be connected directly to an audio interface.

SFX Sound

Demo by Paul Reich

micro-Thumpinator v2

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

BOSS

TU-3W Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

efx ritch bitch

Daniel Kirk

Jeder kennt die Frustration, die ein durch viele hintereinander verschaltete Effektpedale verfälschtes Signal hervorruft. Pro Audio Mixer haben AUX send/return Funktionen standardisiert um dieses Problem zu lösen. Dies bewahrt die Integrität und Dynamik des Gitarrensignals, da der Effekt mit dem unbearbeiteten Signal "gefüttert" wird.

Der X-Blender verwendet diese professionelle Audio Techologie um die klanglichen Unzulänglichkeiten auszugleichen, die manche Effekte produzieren und ist auf vollständige Transparenz ausgelegt.


It's frustrating to hear the signal deterioration when playing through a chain of effects. Because of the narrow dynamic range and multiple filtering, these effects greatly disturb the directness and trueness of the guitar signal. Pro-audio mixers standardized Aux send/return function to help solve this problem. This preserved the integrity of the guitar'ssignal and dynamics by feeding the effect with the unaffected signal. The X-Blender incorporates pro-audio engineering technology to solve the sonic imperfection some effects produce and was designed to be completely transparent.

Xotic

Official Product Page

Demo by Xotic

X-Blender

ch ray

The DynaVerb Limited Spring Edition is a stereo reverb pedal for professional use. With three new reverb effects of Reversed, Gated, and Spring-type, and three Hall and three Room reverbs this versatile pedal is designed for bass players who want to expand their sound options.

The new DynaVerb is created for bass but can enhance any instrument from guitar to keyboard and even vocals with its studio-quality sound in full range.

Review by Premier Guitar

Review by bonedo

Demo by Gregor Fris

Demo by Bruno Tauzin

DynaVerb Limited Spring Edition

The EBS OctaBass SE has been further improved in the SE version (Studio Edition). The OctaBass from 1992 quickly established itself as THE octaver for electric basses. The classic now has an improved internal signal path, a new design and a new protection circuit against overvoltages of up to 18 volts. 

Official Website

Review by Basschat

Demo by Thomann's Guitars & Basses

OctaBass Studio Edition

Lee Atkin

Der Behringer BM-15M MURF BOX ist die ultimative Filtermaschine, konzipiert, um Bewegung, Groove und Leben in deinen Sound zu bringen.

The Behringer BM-15M MURF BOX is the ultimate filtering machine designed to bring motion, groove and life to your sound.

Behringer

Review by Guitar World

Review by Music Radar

Demo by Adam Husk

BM-15M-MURF-BOX

Pedal76 accurately reproduces one of the fastest and most powerful studio compressors of all time, known for having ultra-fast attack and release and adding sweet analog tone to any source. Just like in the studio, Pedal76 has Attack & Release, Ratio, and Input controls, critical for taming unwanted changes in volume on stage. Backed by over 10 years of expertise delivering premium, award-winning studio compression with the Warm Audio WA76, the Pedal76 is capable of bringing out the wide range of legendary compression tones from subtle to hard-limiting as favored by celebrated artists such as Led Zeppelin, Pink Floyd, Periphery, Jack White and many more.

Warm Audio

Demo by  TheSuperFunAwesomeHappyTimePedalShow

Review by Sound on Sound

Pedal76

Für 5-10 FX-Pedale, 1 MOD-Slot - **522 x 236 mm / 20.55" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **522 x 236 mm / 20.55" x 9.29"** - available with Gig Bag or Flight Case

Der RockBoard Pedalboard Drawer ist eine simple aber extrem effiziente Lösung zum Organisieren und Verstauen von optionalem Zubehör in einem RockBoard Pedalboard. Der Pedalboard Drawer wurde entwickelt, um Zubehör wie Kabel, Plektren, Wireless Systeme und vieles mehr im MOD Slot des Pedalboards aufzubewahren. Durch den zentralen Zugang auf der Front des Pedalboards bietet der Drawer einen sichereren, sauberen und einfach zugänglichen Platz zur Aufbewahrung direkt am Setup. Durch die intelligente Arretierung der rotierenden Schublade ist eine zusätzliche Sicherung nicht notwendig.

- rotierende Schublade für RockBoard Pedalboards
- intelligenter Drehmechanismus mit sicherer Arretierung
- für Zubehör, Kabel, Wireless Systeme, Plektren, etc.
- passt in die MOD-Slot Aussparung von RockBoard Pedalboards (außer RockBoard DUO 2.0, 2.1, und 2.2)
- Material: Verstärktes Polyamid
- inkl. Montagematerial und Werkzeug
- Maße (B x T x H): 175 x 84,5 x 47 mm
- Gewicht: 150 g
- schwarz
- Hinweis: Nicht kompatibel mit den 19" Rack Panel Single oder Double (1U) - Rack Mount for RockBoard MOD

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.

- rotating mounting drawer for RockBoard pedalboards
- intelligent swivel locking mechanism
- for accessories, cables, wireless systems, etc.
- fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3)
- material: reinforced polyamide
- incl. all mounting screws, counter nuts, and tools
- dimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"
- weight: 150 g / 0.33 lbs
- black
- Note: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MOD

Rotierende Schublade für RockBoard Pedalboards

Rotating Drawer for RockBoard Pedalboards

BASS TUBE

Miguel Angel Antonio Martínez Fuentes

Das DC7 ist ein professionelles Schaltnetzteil mit einem bemerkenswert flachen Profil von nur einem Zoll, das speziell für die Montage unter Pedalboards mit geringer Bodenfreiheit entwickelt wurde. Es bietet sieben isolierte DC-Ausgänge, von denen jeder bis zu 660 mA bei 9 V liefert, wobei pro Ausgang vier wählbare Spannungen zur Verfügung stehen. Das Gerät verfügt über einen 5V-USB-Ausgang für Mobilgeräte und einen 24V-Zusatzanschluss zur Systemerweiterung mit Einheiten wie dem CIOKS 4 oder 8. Eine fortschrittliche mehrstufige Filterung gewährleistet einen extrem rauscharmen Betrieb, ideal für stromhungrige digitale und empfindliche analoge Effekte. Das Netzteil nutzt einen universellen Netzeingang, was den weltweiten Einsatz ohne externe Transformatoren ermöglicht.

The DC7 is a professional-grade switch-mode power supply featuring a remarkably slim one-inch profile designed for low-clearance pedalboard mounting. It provides seven isolated DC outlets, each capable of delivering up to 660mA at 9V, with four selectable voltages available per outlet. The unit includes a 5V USB output for mobile devices and a 24V auxiliary port for expanding the system with additional units like the CIOKS 4 or 8. Advanced multi-stage filtering ensures ultra-low noise operation, making it suitable for high-current digital and sensitive analog effects. The power supply utilizes a universal mains input, allowing for worldwide use without the need for external transformers.

CIOKS

Review by Guitar Chalk

DC 7

Christopher Garrison

CIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal. Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go. 

Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for instance four for a Neural DSP Quad Cortex and two outlets for a Line HX Stomp), allowing you to run more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable setup and gives you more options for connecting additional pedals.

Crux

Suwannaphum Padsapan

REDDI is a fire-engine red tube direct box with an unquestionable quality of sound. This is best foot forward in giving the audio world a truly remarkable product at an affordable price.

The REDDI has been field tested and referred by recording engineers to be the "best tube DI ever made".

With wider bandwidth and just the right amount of gain, the REDDI stands clear and clean above the competition.

Great for Basses, Guitars, Synths and electronic instruments that require a direct box for recording, the REDDI is READY to give you unsurpassed sound for that perfect recording or live performance.

A-Designs

REDDI

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

The Arkham Sound Oracle V1 is a single-channel, vacuum tube pre-amplifier inspired by the iconic Portaflex Bass amps of the 1960s. It features a 12AX7 tube, selected for low noise and good tone, and is powered by a 300VDC power supply. The preamp has a buffered 1/4" output, providing ample gain to feed a modern power amp or the line input of a recording interface.

The Oracle features a pedal-sized enclosure with the full Arkham EQ, allowing for a wide adjustment range with minimal interaction. It has dual Lo-Z outputs, Out 1 for normal use (power amp, interface, etc.) and Out 2 for additional use with a DI box. The controls include Gain, Treble, and Bass.

The Oracle is designed to be a bearer of rich tones, inspired by the Ampeg Portaflex series. It is a handmade instrument amplifier, crafted with attention to detail and a focus on tone.