teerapat srisang

p bass 

Tester

The Microtubes Vintage is our tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.

Darkglass Electronics

Manual

Demo by  Prymaxe

Demo by  Musicmaker

Product Page

Review by Steve Cook, premierguitar.com

Review by Rainer Wind, bonedo.de

Demo by amosheller 

Demo by the bass channel 

Vintage Microtubes

Die Walrus Audio Julia ist ein komplett analoges Chorus/Vibrato-Pedal, das mit einigen Besonderheiten aufwarten kann. Obwohl es sich bei den beiden um alteingesessene Standard-Effektsounds handelt, versteht es der amerikanische Boutique-Hersteller, mit einigen Extras jenseits der Norm Interesse zu wecken.
So auch bei der Julia, bei der beispielsweise fließend mit einem Blend-Regler zwischen Chorus und Vibrato gewechselt werden kann. Dazu lässt ein Schalter die Wahl, den LFO zu Sinus- oder Dreieck-Wellenformen zu überreden. Was diese Funktionen klanglich bewirken, schauen wir uns im Folgenden an.

The Julia is a fully analog, feature-rich chorus/vibrato packed with a wide array of tonal landscapes begging to be explored. Updated for 2020, Julia now has top mounted jacks, soft switch bypassing and updated art from Adam Forster. 

Julia is able to produce mild smooth chorus, to seasick vibrato and everywhere in between. With controls like Lag, Dry-Chorus-Vibrato Blend, and selectable analog LFO wave shapes, you are able to dial in all types of classic and unique chorus/vibrato sounds; some settings giving a familiar feel while others are not found on traditional chorus pedals.

A special feature of the Julia is the Lag control. The Lag knob lets you set the center delay time that the LFO effect modulates from. From smooth and tight modulation at lower settings, to warbling detune at maximum, the Lag knob adds a new dimension to the traditional Chorus/Vibrato landscape. 

Walrus Audio

Review by guitar 

Review by bonedo 

Demo by Mike Hermans 

Demo by SweetWater 

Demo by Nobel Music 

Julia V2

PedalSafe Type B1

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale, Mooer GL 100

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals, Mooer GL 100

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

David Litaba

The 280 is an optical compressor that can go from light sustain to utterly smashed with the turn of a knob. Unlike faster non-optical circuits the 280 retains your high frequencies until you get into the more extreme settings. The 280 is ideal for chicken-pickin’, added sustain for leads, or snappy-slappy funk rhythm. The 280 also has enough output to be used as a lead boost with added compressor sustain. And like all of the updated DOD pedal, it has a modern power jack, LED, light but strong aluminum chassis, and true bypass switching.

Users Manual 

Product Page 

Product Demo 

Compressor 280

Roland Schmidt

KORG

Official Product Video

Pitchblack X mini

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Für 3-5 FX-Pedale - **318 x 142 mm / 12.52" x 5.59"** - erhältlich mit Gig Bag

For 3 - 5 FX pedals - **318 x 142 mm / 12.52" x 5.59"** - including Gig Bag

Lee Atkin

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Heavy Rock/Metal

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

BOSS

TU-3W Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Stephen Kirkby

The FAT GENERAL MKII is an evolution of the critically acclaimed OTC-201 compressor. ThorpyFx and the original designer (Dan Coggins) have collaborated to deliver the next level of compression for guitarists. Unlike many other compressors, the FAT GENERAL MKII adds sustain and balance to your signal without unnecessary noise or signal “pumping”. You'll also notice that the FAT GENERAL MKII can be particularly transparent but with a sparkle and clarity that you were missing before. For me it has become an always on pedal, I cant play without it!

Aside from achieving fantastic sonic credentials the FAT GENERAL MKII is built like a tank with physical features such as recessed knobs and top mounted jacks. Robust build does not have to come at the sacrifice of looks, the FAT GENERAL MKII uses a combination of a beautiful stainless steel laser etched centre console wrapped in a tough baseplate. 

ThorpyFX

Demo by GUITARS & GIZMOS

Review by Premier Guitar

Review by Compressor Pedal Reviews

Fat General

The Chase Bliss Tonal Recall RKM is the ultimate delay pedal for sound tinkerers and fans of spherical reverb sounds. The'Red Knob Mod' version of the Tonal Recall features 4 classic MN3005 Bucket-Brigade Delay Chips. Delay times from 20 to 275ms or 80 to 1100ms can be controlled by S/L/B controls either individually or even together, while Note Division Toggle allows binary and ternary subdivisions of the tapped tempo.

The three controls Mix, Delay-Time and Rain control the classic parameters of the delay effect in the form of mix portion, reverb time and number of repetitions. It gets really exciting when the modulation talents of Tonall Recall are used. Three different waveforms for the LFO and controls for effect depth and rate are available.

Chase Bliss

Official Website

Review by AMAZONA

Review by Sam Goffen Guitar

Demo by Knobs

Tonal Recall

ch ray

Der BOSS SDE-3 Dual Digital Delay ist ein kompaktes Stereo-Delay-Pedal, das den klassischen Klang und Charakter des Roland SDE-3000 Rack-Delays in ein pedalboardtaugliches Format bringt. Es bietet reichhaltige vintage digitale Delay-Töne mit kreativer Kontrolle über Verzögerungszeit, Feedback, Modulationstiefe und Rate sowie einen High-Cut-Filter zur Formung der Echo-Wiederholungen. Die Offset-Regelung erzeugt eine zweite Verzögerungslinie für polyrhythmische und Stereo-Texturen. Der Pedal verfügt über vielseitige Ausgangsmodi einschließlich Stereo-Ein/ausgängen und Wet/Dry-Routing, Tap-Tempo, MIDI-Sync-Eingang, Expression-Pedal-Steuerung und einen gepufferten Bypass mit Carryover für natürliche Ausklänge.

The SDE-3 fuses vintage digital character and wide-ranging versatility into one unique and inspiring BOSS compact pedal. Experience the genuine sound and core features of the Roland SDE-3000, an iconic ’80s-era rackmount delay favored by some of the most influential guitarists of all time. Flow into any creative setup with a slate of modern features. And twist the powerful Offset control to explore an array of colorful dual-delay textures.

Demo by The Studio Rats

Instagram Channel

Review by Guitar World

SDE-3 Dual Digital Delay

Wenn Wampler beschließt, in den MultiFX-Markt einzusteigen, tun sie das mit Stil. 11 individuell gestaltete Effektblöcke, von Flanger bis Phaser, Chorus bis U-Vibe, Harmonic Tremolo bis Envelope Filter, Sie wissen, dass alles daran perfekt sein wird. In einem unglaublich kleinen Paket können Sie jedes der 8 Presets über MIDI steuern, Sie können ein Expression-Pedal zuweisen, um JEDES der fünf Hauptsteuerelemente zu steuern, Sie können es in vollem, herrlichem Stereo laufen lassen oder in Mono belassen ... Sie können dieses Monosignal sogar aufteilen, um einige Effekte vor Ihre Antriebspedale oder den Verstärkergewinn zu leiten und den Rest hinterher oder in Ihren Effekt-Loop laufen zu lassen! Wenn Sie Terraform in Ihr Rig einbauen, wissen Sie, dass Sie nicht nur diesen legendären Wampler-Ton erhalten, sondern auch die benutzerfreundlichste, vielseitigste und am besten klingende Modulationssammlung, die Sie sich jemals wünschen könnten!

When Wampler decides to jump into the multiFX market, they do it in style. 11 custom designed effects blocks, from Flanger to Phaser, Chorus to U-Vibe, Harmonic Tremolo to Envelope Filter, you know everything about it is going to be perfect. In one incredibly small package, you can control any of the 8 presets via midi, you can assign an expression pedal to control ANY of the main five controls, you can run it in full glorious stereo or keep it in mono... you can even split that mono signal to route some effects to go before your drive pedals, or amp gain, and have the rest follow behind or in your effects loop! When you put the Terraform into your rig, you know that not only will you get that legendary Wampler tone, but you will get the most easy to use, hugely versatile and best sounding collection of modulations you could ever want!

Wampler

Review by amazona.de

Review by guitarworld.com

Review by premierguitar.com

Review by bonedo.de

Demo by  Premier Guitar

Demo by  The Gear Cage

Demo by Reverb

TERRAFORM

The JP95 John Petrucci Signature Cry Baby® Wah is the result of the legendary prog metal shredder's years-long quest to hone his perfect wah tone. For years, John used the Cry Baby Rack Wah system to tweak and fine-tune its numerous parameters until he found the sound that perfectly represents all the expression and intensity he needs. Recently, he and Dream Theater engineer Richard Chycki worked with the Cry Baby design team to replicate and further fine-tune that sound with a single pedal. This is a wah that, as John puts it, "sounds huge and badass like an angry, screaming monster with the ultimate expressive range—it's perfect for shaping single notes or manipulating growling, heavy chords."

Dunlop

Review by The Gear Page

Review by bonedo

Review by Gitarre & Bass

Demo by TOKYO SOUND PROJECT

Demo by PMTVUK

JP95 John Petrucci Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

There is one overdrive circuit to this day has been the most talked about, the most sought after, and the most mythical of them all. It’s big, it’s expensive, and it has certainly earned its place at the table. Wampler has painstakingly and faithfully reproduced that magical tone in all its glory in an unbelievably small package, and its name is Tumnus. Tumnus is a versatile addition to any setup, any style. Stack it with another pedal to help push or shape the total amount of gain, use it as a stand alone overdrive, or use it as a slightly dirty boost to push the front end of your amp over the edge. You can even use it as a buffer, because just like the original this pedal is not true bypass. Instead, faithful to the original, this pedal contains a buffered bypass tone legendary in its own right. The Tumnus’ streamlined 3 control knobs (Volume, Gain, and Treble) allow you to quickly dial in your tones no matter what the gig calls for. We aren’t going to sit here and claim it has magical parts, or we sourced out 60 year old diodes that make it perfect, but we are going to say that during our research we looked at everything available and then only used the parts that Brian chose to replicate that amazing tone. Let’s face it, not everyone has room for a four-legged beast on their board. This smaller version slips in and out of a myriad of tight situations. Now you can have the tone. Now you can have history. Now you can have it all without having to sell your prized gear possessions. The Wampler Tumnus, standing up for that amazing tone, but without the outrageous claims often associated with it.

Review by The Gear Check 

Demo by Pete Thorn

Demo by Tone Factory

Tumnus

Travis Dom

The Decimator guitar pedal offers a new approach to noise reduction processing. Most noise suppression systems suffer from one major problem inherent in their design: The system cannot be immediately responsive to very short-term staccato notes. The typical downward expander sound reduction system suffers from a dead zone in the release response characteristic that causes a compromise in tracking both fast decaying notes and long sustained notes. The Decimator pedal's design offers a novel approach to tracking the envelope of the input signal called Time Vector Processing.

Due to this novel approach in controlling the expander, the Decimator system will instantly respond to short staccato notes and, at the same time, will provide a very slow ripple free control of long sustained notes. The Decimator noise suppression system is very transparent delivering high performance.

ISP Technologies

Review by sevenstring.org

Review by 300Guitars

Demo by EnsiGear

Decimator

Michael Hodgson

In this aptly named box you'll find a huge range of killer high gain tones. From crisp, mid-driven 80's metal, to scooped, modern down-tuned brutality, this little box of sonic mayhem does it all. The two independent channels can be voiced similarly so that one channel can be used as a solo boost, or they can be voiced entirely differently by using the mid range control in conjunction with the 3 position mid frequency select switch. Add in separate weight controls to shape the low end response of each channel, and a global hi/low eq section that allows you to fine tune your particular amp and cab combination, and you've got a serious tool to create a supremely heavy sounding rig.
On top of all this we've added an extremely responsive and hassle free noise gate that will ensure dead silent operation with even the most obscene amounts of gain added.

Empress Effects

Review by musicradar

Manual download

Demo by Firehouse Guitars

Demo by Chuchu

Heavy

RockBoard

ISO Power Block V10

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Gordon Schauff

Bart Gijde

FS-7 ist ein kompakter Doppelfußschalter zur Fernsteuerung von Effektpedalen oder zur Kanalumschaltung von Verstärkern. Zwei Fußschalter sind hintereinander angeordnet, was Platz auf Effektpedalbrettern spart. Zwei wählbare Modi für Latch oder Momentary ermöglichen die Steuerung einer breiten Palette von Geräten.

FS-7 is a compact dual footswitch for remote control of effect pedals or amp channel switching. Two footswitches are arranged in tandem, which saves space on effects pedal boards. Two selectable modes for latch or momentary allow for control of a wide range of equipment.

FS-7

Nick Toye

FS-6

Christopher Laliberte

The Jack ist der Allround-Amplifier von Victory und wurde ursprünglich in Zusammenarbeit mit dem Fusion-Gitarrist Guthrie Govan entwickelt. Er bietet von glasklaren Cleans bis extremer Verzerrung alles was man sich von einem Gitarrenverstärker wünschen könnte. Die Sounds sind dabei auf einen Clean und einen Overdrive Channel aufgeteilt, jeweils mit einzelnen Master Volume Reglern. Ersterer lässt sich per Fußschalter auch in einen Crunch Mode versetzen. Der rückseitige Nomod-Schalter sorgt für ein tighteres Lowend, was gerade bei höherer Verzerrung äußerst nützlich ist.

Neben der 30 Watt Lunchbox Version V30, gibt es auch das V130 Topteil im Holz und Tolex Gehäuse mit 100 Watt Leistung und zwei Gain Modes im Overdrive Channel. Ebenfalls erhältlich sind der V4 The Jack Preamp und der V4 The Jack Pedalboard Amp sowie das V1 The Jack Pedal, mit dem sich jeder Amp mit den Crunch-, Overdrive- und Lead-Sounds der The Jack Amps kombinieren lässt.


The Jack is Victory's all-around amplifier and was originally developed in collaboration with fusion guitarist Guthrie Govan. It offers everything you could want from a guitar amp, from crystal clear cleans to extreme distortion. The sounds are split between a clean and an overdrive channel, each with individual master volume controls. The former can also be set to crunch mode via a footswitch. The Nomod switch on the back provides a tighter low end, which is extremely useful for higher distortion.

In addition to the 30-watt lunchbox version V30, there is also the V130 top in wood and tolex housing with 100 watts of power and two gain modes in the overdrive channel. Also available are the V4 The Jack Preamp and the V4 The Jack Pedalboard Amp as well as the V1 The Jack Pedal, which can be used to combine any amp with the crunch, overdrive and lead sounds of The Jack amps.

Victory

Review by reddit /guitarpedals

Demo by Pedalboards of Doom

The Jack V4 Preamp

Das EarthQuaker Devices Afterneath V3 klingt ein wenig so, wie es aussieht: Wie ein Sound-Zauberer, der eine riesige Höhle betritt und sich in die Ambient-Reverb-Schlacht wirft. Das Pedal bietet ein extrem breites Spektrum an unterschiedlichen, riesigen, ausladenden und magischen Ambient-Reverbs und deckt von wilden, verschlungenen Hall-Effekten über atmosphärische, kurze, digitale Delays bis zu Staccato-artigen, rhythmischen Wiederholungen mit bizarren Sounds alle denkbaren Effekte ab. Die Regelmöglichkeiten für Length (Länge des Nachhalls), Dampen (Tone), Reflect (Depth, Regeneration) und Mix (Wet/Dry-Mix) sind bekannte Parameter bei Reverb-Pedalen und arbeiten sehr intuitiv. Der Diffuse-Regler kontrolliert die Streuung des Nachhalls und ermöglicht je nach Setting aggressivere Sounds, bei denen das Einsetzen der einzelnen Wiederholungen deutlicher hörbar oder weicher und verwaschener wird. Der Drag-Regler trennt die digitalen Delay-Gruppen voneinander. So rücken den Repeats je nach Setting näher aneinander (Hall-ähnlicher Effekt) oder werden auseinander gezogen, sodass statt eines Halls verstreute Ping-Pong-Effekte zu hören sind.

The EarthQuaker Devices Afterneath V3 sounds a lot like it looks: a sound wizard bursting forth from ethereal cave and ready for the ambient reverb battle. The pedal offers an extremely wide range of different, vast, expansive, and magical ambient reverbs and covers all possible effects from wild and cavernous reverb effects to atmospheric reverberations of short digital delays to scattered, rhythmic delays with bizarre characteristics. The controls for Length (decay length of the reverb), Dampen (tone), Reflect (depth, regeneration) and Mix (wet/dry mix) are well-known parameters for reverb pedals and work very intuitively. The Diffuse knob adjusts the spread of the reverb, turned counterclockwise, the reverb is sharper with more attack, resulting in a stuttering sputter of individual early reflections. Clockwise casts a washy, more ambient-sounding effect. Drag separates the individual digital delay lines, clockwise positions will gather the delay lines close together for a more reverb-like effect. Turn the Drag counterclockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.

EarthQuaker Devices

Official Product Page

EarthQuaker Devices Afterneath V3 - Official Demo Video

EarthQuaker Devices Afterneath V3 - Official Manual Video

EarthQuaker Devices Afterneath V3 - Official Demo Video, Designer Notes with Jamie Stillman

EarthQuaker Devices Afterneath V3 - Demo Video - Dennis Kayzer

EarthQuaker Devices Afterneath V3 - Review by Gitarzysta [PL], [06-2020]

EarthQuaker Devices Afterneath V3 - Review by Gitarre&Bass [DE], [06-2020]

Afterneath V3

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

DD-7 Digital Delay

Dem beliebten MXR Ten Band EQ hat der amerikanische Hersteller ein Facelift verpasst und präsentiert ihn unter der Modellnummer M108S in einem neuen, leichteren Gehäuse mit True-Bypass-Schaltung, einer effektiveren Rauschunterdrückung und zwei Ausgängen. Geblieben sind das große Frequenzspektrum von 31,25 Hz bis 16 kHz, getrennte In- und Output-Levels sowie der Betrieb mit 18 Volt für mehr Headroom.
Da der MXR Ten Band EQ auch Frequenzbereiche unterstützt, die von einem Gitarrenlautsprecher eigentlich nicht mehr übertragen werden, empfiehlt er sich ebenso für den Betrieb am E-Bass, für Fullrange-Anwendungen oder fürs Direct-Recording. Nicht wenige Gitarristen schätzen den grafischen Equalizer

The MXR Ten Band EQ has been upgraded with noise-reduction circuitry, true bypass switching, a lightweight aluminum housing, brighter LEDs for increased visibility, and a second output so you can run two separate signal chains. With ten carefully chosen frequencies and both input and output level controls, the Ten Band EQ will let you tune your bass or guitar rig to any room in seconds—create earthshaking low-end; restore punch, level, and treble response to a crowded pedalboard; warm up an amplified acoustic; and much, much more. For ultimate tone-sculpting ability in a bullet-proof enclosure, put the Ten Band EQ on your pedalboard. 

Review by awkwardsound 

Demo by Ryan Lutton

Review by HOMETONEBLOG

M108S Ten Band EQ

JF-23 ARGOS OVERDRIVE features 6 Overdrive tones in one unit, its built-in circuit attenuates signals that register below the threshold of the Noise Gate. With wide range, natural and flexible. Moreover, it can be used as a Booster, sculpting High Gain tones in different styles via the ATTACK Control Knob.

JOYO

Review by reddit /metalguitar

Demo by Chris Benton

Demo by Baritone Goat Studio

JF-23 Argos Overdrive

Michael Gough

Deep Six Compressor V1

Heitor Rosa

Der NS-1X ist mit der fortschrittlichen BOSS MDP-Technologie ausgestattet und dämpft Geräusche auf intelligente Weise, ohne den natürlichen Klang und das Spielgefühl deiner Gitarre oder deines Basses zu beeinträchtigen. Der Reduction-Modus sorgt dafür, dass Ihr Rig in jedem Spiel-Setup leise bleibt, während der Gate-Modus eine ultraschnelle Performance bietet, die sicherstellt, dass präzise High-Gain-Riffs scharf und deutlich bleiben. Der vielseitige und einfach zu bedienende NS-1X ist ein unverzichtbares Werkzeug zur Beseitigung von Rauschproblemen beim Üben, Spielen und Aufnehmen.

Powered by advanced BOSS MDP technology, the NS-1X intelligently silences noise without affecting the natural tone and playing feel of your guitar or bass. Reduction mode keeps your rig quiet in any general playing setup, while Gate mode provides ultra-fast performance to ensure that precision, high-gain riffs remain sharp and distinct. Versatile and easy to use, the NS-1X is an essential tool for defeating noise issues while practicing, performing, and recording.

Review by Rig-Talk

Review by Reddit /guitarpedals

Review by SonicScoop

Review by Audiofanzine

Demo by Andertons Music Co

Demo by Scott Wharton's Guitarnivore

NS-1X Noise Suppressor Pedal

The MXR® design team has collaborated with Eddie Van Halen to deliver a full range of powerful saturation and hyper-driven tones right at your feet. The resulting EVH 5150™ Overdrive joins hand-adjusted multi-stage MOSFETs with a full complement of controls to deliver overdriven tube-like tones and exceptional sonic flexibility through a wide variety of amps and speaker cabinets.

Whether on stage or in the studio, the EVH 5150 Overdrive's controls dial up the whole spectrum—from Eddie's groundbreaking early classic tones to the high gain, super-articulate sound he later used. Output and Gain controls set your volume and distortion levels, while the 3-band passive tone stack EQ section shapes your sound to taste. The Boost switch kicks the 5150 Overdrive into high gear with extra gain and compression, and the Gate control—powered by the Smart Gate® circuit—tames unwanted noise. 

Demo by Elmo Karjalainen

Demo by ProGuitarShopDemos

EVH5150 5150 Overdrive

Don Jordan

TU-2

ISO Power Block V16

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Massimo Bernardinello

P-01

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

The Doom

Jonathon Hunter Hill

The Intelligent Footswitch is an intuitive yet versatile accessory for our amplifiers. One tap will engage and disengage the Microtubes Engine, while holding for 3 seconds will Mute the amplifier. It is connected to the head via a standard 1/4″ cable and it’s powered by a microcontroller that sends commands to the head using a proprietary communication protocol.

Review by Sweetwater Customer

Intelligent Footswitch

Julia V2 von Walrus Audio