Piriya TM

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

New Pedal Board-copy

Tester

29 Pedals

Product Page

Review by The Gear Page

Review by American Songriter

Review by reddit /guitarpedals

Demo by Rabea Massaad

Official Product Video

EUNA

David Litaba

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

TC Electronic

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Manual

Demo by TC Electronic 

Demo by Guitar World 

Polytune 3 Mini

Riverside is the culmination of a thorough analysis of numerous analog and vacuum tube circuits. Our goal? To deliver a new world of harmonically rich, incredibly versatile, tube-inspired drive sounds. We didn’t want to build just another distortion or overdrive. We knew we must examine what has been done, and bring a new approach to the world of drive sounds.

Strymon

User Manual 

Product Demo 

Riverside

Sunset gives you the best of the best classic overdrive circuits, custom voiced for instantly gratifying control over a huge range of sought-after tones. 

Review by Amazona 

Demo by EytschPi42

Demo by Strymon 

SUNSET

ome might say we’re driven. When our engineers lock themselves in our sound design labs for months on end, you might say we’re obsessed. We have been dedicating ourselves to forging a collection of the most organic, luscious, expressive, and versatile modulation effects ever heard.

It was an enormous mission—we painstakingly studied the nuances of the legendary modulations of celebrated tremolo effects, phaser pedals, chorus units, and more from the last five decades. We didn’t stop at faithfully capturing these warm and lush vintage sounds—we expanded their vocabulary with extended versatility and sonic possibilities never before heard.

Review by musicradar

Review by permierguitar

Quick Start Guide 

Demo by Mike Hermans

Demo by stymon

Mobius

QuickMount Type J1

Pedal-Montageplatte für BOSS DD-500, MD-500, RC-500 & RV-500 / STRYMON BigSky, Mobius & TimeLine Pedale

Pedal Mounting Plate for BOSS DD-500, MD-500, RC-500 & RV-500 / STRYMON BigSky, Mobius & TimeLine pedals

Nothing reveals the true nature of your guitar and your playing like a world-class tube amp driving a perfectly matched speaker cabinet in a great sounding room. Now there is a pedal that truly delivers that sound and feel, with simple controls for effortlessly dialing in the perfect amp tone when going direct.

Discover inspiring tube amp responsiveness, unprecedented impulse response speaker cabinet realism, and controllable natural sounding room ambience.

Review by GuitarWorld

Review by bonedo

Demo by Guitar Bonedo

Iridium

Die magische Kombination aus Tremolo und Reverb ist das früheste Beispiel für eine perfekte Verbindung von Gitarreneffekten. Erstmals in legendären Verstärkern der 1960er Jahre eingesetzt, hat dieses harmonische Zusammenspiel unzählige Aufnahmen und Live-Performances geprägt – von frühem Surfrock, swampigem Bayou-Blues, Spaghetti-Western und Film-noir-Soundtracks bis hin zu modernem Indie-Rock. Auch heute entdecken Gitarrist:innen die inspirierende Kraft dieses Traumpaars immer wieder neu.

Flint ist ein Studio-Qualitäts-Effektpedal, das genau diese klassische Kombination liefert. Wir haben unsere Lieblings-Tremolo- und Reverb-Schaltungen aus der Vergangenheit intensiv analysiert, ihre klanglichen Feinheiten untersucht und sie in unseren aufwendig entwickelten Algorithmen detailgetreu nachgebildet. Flint ist im Grunde zwei Pedale in einem – Tremolo auf der einen, Reverb auf der anderen Seite.

The magical combination of tremolo and reverb is the earliest example of a perfect guitar effects marriage. First pioneered within historic amplifiers of the 1960s, this harmonious coexistence has made its way onto countless records and performances — from early surf, swampy bayou blues, spaghetti westerns and film noir soundtracks, to modern day indie rock. As music moves forward, guitarists continue rediscovering the inspiration provided by this perfect pair.

Flint is a studio-class effects pedal that delivers this classic combination. We carefully studied our favorite classic tremolo and reverb circuits, examined the sonic complexities and faithfully accounted for every detail in our hand-crafted algorithms. Flint is essentially two pedals in one, with tremolo on one half and reverb on the other.

Review by Guitar.com

Review by Pedal of the Day

Review by Six String Sensei

Demo by Made by Miike

Audio Examples

Flint

PedalSafe Type J

QuickMount Type J

Pedal-Montageplatte für mittelgroße Strymon-Pedale

Pedal Mounting Plate For Medium Size Strymon Pedals

Schutzabdeckung & RockBoard-Montageplatte für STRYMON Medium Size Effektpedale

Protective Cover & RockBoard Mounting Plate For STRYMON medium size effect pedals

Schutzabdeckung & universelle Montageplatte für STRYMON Medium Size Effektpedale

Protective Cover & Universal Mounting Plate For STRYMON medium size effect pedals

El Capistan vereint drei verschiedene Bandmaschinentypen in einem Pedal, jeweils mit drei einzigartigen Modi und umfassender Kontrolle über Bandqualität, Maschinenzustand und Klangformung.

Wechseln Sie von der vollen Klangstabilität einer fabrikneuen Echomaschine bis zum stark schwankenden Klang eines renntauglichen Geräts. Genießen Sie den vollen Klang eines neuen Bandes oder die dunklen, rauen und vibrierenden Eigenschaften eines abgenutzten Bandes.

El Capistan provides three different tape machine types in one pedal, each with three unique modes and extensive control over tape quality, machine health and tone shaping.

Go from the full-range sonic stability of a fresh-from-the-factory echo machine, to the heavily fluctuating sound of a road-worn unit in need of service. Enjoy the full bodied sound of fresh tape, or dial in the dark, gnarled and vibey qualities of worn out tape.

Review by Elektronauts

Demo by strymon

El Capistan v2

Start your signal chain with the best possible version of your guitar tone with this successor to the OB.1. Treat your guitar signal to true studio quality analog compression with two distinct voices for smooth transparency or vintage squeeze. Hit the Boost switch to add clean boost or soft-clipped dirty boost, with the EQ curve of your choice. 

Demo by Rhett Shull

COMPADRE

Jarek Harek

Ampero Press 25kΩ Edition ist ein kompaktes, passives Volume/Expression 2-in-1-Pedal, das nicht nur zur Steuerung des Ampero II Stomp*, sondern auch anderer Musikgeräte (mit
externen EXP-Pedalbuchsen, die einen 25kΩ EXP-Widerstand erfordern) oder als passives Lautstärkepedal verwendet werden.Das Gehäuse besteht aus einer soliden Aluminiumlegierung und bietet ein angenehmes und komfortables Benutzererlebnis. 
*Die Unterstützung der Ampero Press 25kΩ Edition ist in der Ampero II Stomp-Firmware V1.1.0 oder höher implementiert.

Ampero Press 25kΩ Edition is a compact, passive volume/expression 2 in 1 pedal designed not only for controlling Ampero II Stomp*, but also other musical devices (with
external EXP pedal jacks that requiring 25kΩ EXP resistance) or being used as a passive volume pedal. It has solid aluminum alloy casing, smooth and comfortable user experience. 
*Ampero Press 25kΩ Edition's support is implemented in Ampero II Stomp firmware V1.1.0 or above

HOTONE

Demo by  gitarisINA

Hotone Ampero Press 25kΩ

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

New Pedal Board

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Adri  Putranto

Wildcard #7

Die RockBoard® MOD 5 Cab SIM + DI Patchbay bietet wählbare, IR-basierte Stereo-Lautsprecher Simulation, eine aktive DI-Box, sowie eine einfache Lösung, um alle Verbindungen zu und von deinem Effekt Setup zu organisieren. Egal, ob du ein RockBoard® oder ein anderes Pedalboard einer anderen Marke verwendest - die MOD 5 eröffnet völlig neue Möglichkeiten. Mit der Speaker-Cab-Simulation und DI kannst du direkt loslegen und hast DEINEN Sound parat, unabhängig davon, welche Backline an der jeweiligen Venue zur Verfügung steht. Du möchtest deine persönliche Lieblings-Cabinet benutzen? Kein Problem, lade eine Impulse Response des Sounds in die MOD 5 und du hast sie überall dabei. Der Patchbay-Teil dient dazu, Verbindungen von unterhalb deines Pedalboards nach vorne zu leiten, um dir einen zentralen Zugangspunkt zu deinem Setup zu geben und deinen Kabelsalat aufzuräumen. Für geräuschloses Üben auf der Straße bietet der MOD 5 auch einen Kopfhörerverstärker mit einstellbarer Ausgangslautstärke.
- Cabinet Simulation & DI Patchbay
- IR basierte Lautsprecher Simulation
- 6 integrierte IRs wählbar
- Unterstützung von zusätzlichen Custom IRs (max. 1024 pts.)
- integrierte aktive DI Box
- Kopfhöhrer Verstärker
- passend für MOD Slots in RockBoard® Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- wählbarer MONO / STEREO Input
- wählbarer UN- / BALANCED Output
- Ground Lift Schalter
- Regler für Phones Volume
- 3 x 6,3 mm TRS Thru
- XLR DI Out
- 6.3 mm Parallel TRS Output
- 3.5 mm Stereo Kopfhöhrer Ausgang mit einstellbarer Lautstärke
- micro USB Anschluss für Firmware Updates und zum Hochladen von Custom IRs
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Stromaufnahme 300 mA
- Batteriebetrieb nicht unterstützt
- Abmessungen mit Frontplatte (B x T x H) 175 x 85 x 47 mm 
- Abmessungen ohne Frontplatte (B x T x H) 160 x 85 x 33 mm
- Gewicht 470 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.
- cabinet simulation & DI patchbay
- IR-based speaker cabinet simulation
- 6 integrated IRs selectable
- support of additional Custom IRs (max. 1024 pts.)
- integrated active DI box
- headphone amplifier
- fits MOD slots in RockBoard® pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- selectable MONO / STEREO input
- selectable UN / BALANCED output
- ground lift switch
- control for Phones Volume
- 3 x 6.3 mm / ¼" TRS thru
- XLR DI Out
- 6.3 mm / ¼" Parallel TRS output
- 3.5 mm / 1/8" stereo headphone output with adjustable volume
- micro USB connection for firmware updates and loading custom IRs
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- current draw 300 mA
- battery operation not supported
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 470 g / 1.04 lbs.
- incl. mounting screws, counter nuts, and TX wrench

Cab SIM + DI Patchbay

Sandbox Pedal Board-copy

Teeratai Kaewmanee

Cabzeus is a algorithm-based  speaker - cabinet - miking  simulator system. Connected direct to your gears this device enables you to obtain the sound of a miked-guitar amp cabinet without the hassle of miking your cabinets. Extending this basic function, we’ve built into Cabzeus a plethora of unique and powerful features that goes beyond simple speaker simulations.

GFI SYSTEM

Demo by ProGuitarShopDemos

Cabzeus Stereo

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

Review by Charleston Classical Guitar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Daniel Balogh

Der RockBoard ISO Power Block 12 IEC ist ein Multi-Netzteil für Effektgeräte und bietet 12 galvanisch getrennte, hochgradig gefilterte Stromanschlüsse und einen 5V USB-Anschluss. Das Multi-Netzteil wurde entwickelt, um bis zu 12 Effektpedale, auch mit unterschiedlichen Betriebsspannungen, gleichzeitig geräuschlos mit Strom zu versorgen. Die fortgeschrittene Filtertechnologie verhindert wirksam hochfrequente Nebengeräusche. Durch die separate Kurzschlusssicherung werden die angeschlossenen Effektpedale im Falle eines Kurzschlusses vor Beschädigungen geschützt. Separate LED zeigen Kurzschlüsse für jeden einzelnen Anschluss an. Kommt es zu einem Kurzschluss wird lediglich der betroffene Ausgang ausgeschaltet, so dass der reibungslose Betrieb der verbliebenen Anschlüsse weiterhin gewährleistet ist.

The RockBoard ISO Power Block 12 IEC is a multi-power supply for effects pedals with 12 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 12 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.

RockBoard

Official Product Page

Pedal Board Online Configurator

ISO Power Block V12 IEC

Die Legende besagt, dass Eddie Van Halen lange Zeit ein Standard Crybaby-Wah gespielt hat, das in den 90ern nach seinen Vorstellungen modifiziert wurde

The EVH Wah was developed after intensive design collaboration with the legendary guitarist, Eddie Van Halen. Early on in the process, Eddie handed over his "Holy Grail" Cry Baby Wah—a standard Cry Baby customized in the early Nineties with a more vocal-like, High Q inductor and a wider frequency sweep.

Dunlop

Review by Bonedo 

Demo by SweetWater 

EVH95 EVH Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Katherine Copanic

SP Technologies introduces the new DECI-MATE™ Micro Decimator pedal. The DECI-MATE pedal is a full implementation of the world renowned Decimator circuit with new tracking improvements in a small, micro pedal package. When real estate is critical, the DECI-MATE is the answer.

ISP Technologies

Demo by  Simon Gotthelf Gear Demos

Demo by Louis Torres

Deci mate Micro Decimator

Mesa Boogie

Demo by Daniel Fries

High-Wire Dual Buffer & Output Boost

ch ray

Der BOSS SDE-3 Dual Digital Delay ist ein kompaktes Stereo-Delay-Pedal, das den klassischen Klang und Charakter des Roland SDE-3000 Rack-Delays in ein pedalboardtaugliches Format bringt. Es bietet reichhaltige vintage digitale Delay-Töne mit kreativer Kontrolle über Verzögerungszeit, Feedback, Modulationstiefe und Rate sowie einen High-Cut-Filter zur Formung der Echo-Wiederholungen. Die Offset-Regelung erzeugt eine zweite Verzögerungslinie für polyrhythmische und Stereo-Texturen. Der Pedal verfügt über vielseitige Ausgangsmodi einschließlich Stereo-Ein/ausgängen und Wet/Dry-Routing, Tap-Tempo, MIDI-Sync-Eingang, Expression-Pedal-Steuerung und einen gepufferten Bypass mit Carryover für natürliche Ausklänge.

The SDE-3 fuses vintage digital character and wide-ranging versatility into one unique and inspiring BOSS compact pedal. Experience the genuine sound and core features of the Roland SDE-3000, an iconic ’80s-era rackmount delay favored by some of the most influential guitarists of all time. Flow into any creative setup with a slate of modern features. And twist the powerful Offset control to explore an array of colorful dual-delay textures.

BOSS

Demo by The Studio Rats

Instagram Channel

Review by Premier Guitar

Review by Guitar World

SDE-3 Dual Digital Delay

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

The MXR® design team has collaborated with Eddie Van Halen to deliver a full range of powerful saturation and hyper-driven tones right at your feet. The resulting EVH 5150™ Overdrive joins hand-adjusted multi-stage MOSFETs with a full complement of controls to deliver overdriven tube-like tones and exceptional sonic flexibility through a wide variety of amps and speaker cabinets.

Whether on stage or in the studio, the EVH 5150 Overdrive's controls dial up the whole spectrum—from Eddie's groundbreaking early classic tones to the high gain, super-articulate sound he later used. Output and Gain controls set your volume and distortion levels, while the 3-band passive tone stack EQ section shapes your sound to taste. The Boost switch kicks the 5150 Overdrive into high gear with extra gain and compression, and the Gate control—powered by the Smart Gate® circuit—tames unwanted noise. 

Demo by Elmo Karjalainen

EVH5150 5150 Overdrive

HALL OF FAME allows you to experiment and play with reverb the way you see fit. With 10 different reverb types from plates to springs to churches and back, you’ll never be without a great reverb sound the way you imagine it.

Demo by PMTVUK

Demo by Ryan Lutton

Review by Greg Cutshaw

Hall of Fame Reverb

Savor the secret sauce simmered into countless hit records with the MicroPitch Delay effects pedal. By utilizing subtle pitch shifts to create a rich stereo spread, MicroPitch Delay makes anything you cook up sonically delectable. This pedal is the key ingredient for serving up flavorful tones: Instantly harness soaring leads that jump out of the mix, add distinct lushness to a compelling clean passage and get your fill of vibey modulation that’s sure to sweeten any pot with the push of a button.

Sample a bite of our newly baked up Positive and Negative Envelope modulation sources and you’ll be sure to come back for seconds; and major and minor thirds. MicroPitch Delay adds unparalleled dimension to any source; it’s not just a guitar pedal — Use it to thicken vocals, keyboards, drums, strings, brass, winds and more.

Eventide

Review by Gearnews

Quick Start Guide

Demo by Leon Todd

MicroPitch Delay

The Echoplex EP-3 tape echo unit is famous for its deliciously warm, organic modulation and sweet musical voice—a key component to some of the most iconic guitar tones from the '70s onward. The original EP-3 units, however, are expensive, temperamental, and larger than a VCR.

That's where the EP103 Echoplex Delay comes in. It's the size of a Phase 90, and it delivers the EP-3's legendary tones with a simple control interface and a hi-fi all-analog dry path. The Delay control sets the time between repeats—from 65ms to 750ms—the Sustain control sets the number of repeats, and the Volume control sets the output level of your repeats.

Review by Gitarre & Bass

Review by Premierguitar

Demo by Guitarist

EP103 Echoplex Delay

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Everyone knows that it was the MXR Flanger that powered the timeless Van Halen tunes "Unchained" and "And The Cradle Will Rock." Now you can grab a piece of that world-class tone with the MXR EVH117 Flanger. This amazing stompbox features the same bucket-brigade technology that provided the sweeping, whooshing magic of the original. But we didn't stop there. We've also added the EVH Switch, which instantly calls up Eddie's "Unchained" sound with the exact same Manual, Width, Speed and Regeneration settings that he used to get one of the greatest guitar tones of all time. If that's not cool enough, we painted the EVH Flanger with the rocking striped graphics that started a revolution. Get the MXR EVH117 Flanger and hit the ground running.

Product Page 

EVH Flanger Test

EVH117 EVH Flanger

Edward Van Halen's Gitarrensound auf dem Debüt Album von1978 katapultierte ihn schlagartig in dem Olymp des Rock und selbst nach mehr als 25 Jahren hat die Gitarrenarbeit auf diesem Album nichts von ihrer Faszination eingebüßt. Den unglaublichen Sound, den EVH auf dieser Platte kreierte, gehört zu den absoluten Meilensteinen des Rock und ein wichtiger Bestandteil dieses Sounds war von vornherein der MXR Phase 90. Der Phase 90 trug maßgeblich zu den zeitlosen Gitarrensounds von “Eruption,“ “Ain't Talkin' 'Bout Love,“ “On Fire,“ und “Atomic Punk“, sowie vieler anderer klassischer Van Halen Stücke bei. Entstanden aus einer Zusammenarbeit zwischen Eddie Van Halen und Jim Dunlop ist der EVH 90 eine komplett neu designte Version des legendären Phase 90. Der EVH 90 zeigt genau die gleichen räumlichen Klangverwirbelungen und hypnotischen Phasenverschiebungen, die den Phase 90 so berühmt machten. Als neues Feature besitzt der EVH 90 den Script-Schalter, der es ermöglicht, zwischen dem Vintage 'Script Logo' und dem moderneren, aggressiveren 'Block Logo' Phasersound zu wählen. Außerdem präsentiert sich der EVH 90 mit einem rot, weiß und schwarz gestreiftem Outfit, ganz so wie Eddie´s legendäre Frankenstein Gitarre.

Edward Van Halen earned his spot in the guitar tone hall of fame with the first note on his debut album in 1978. The guitar work on that album still boggles minds more than 25 years later. The tones that EVH got on that classic record are among the greatest ever, and a huge part of Eddie‘s guitar sound has always been the MXR Phase 90. The Phase 90 contributed to the unbelievable tones on "Eruption," "Ain't Talkin' 'Bout Love," "On Fire," and "Atomic Punk," plus many other timeless Van Halen tracks. Now you can grab a piece of Eddie's magic with the new MXR EVH 90—a collaboration between Eddie Van Halen and Dunlop Manufacturing that represents a totally redesigned, updated version of the legendary Phase 90. The EVH 90 will give you the same great spacey swirls and hypnotic warbles that made the Phase 90 famous. But the EVH 90 also features the all-new Script switch that lets you instantly toggle between a vintage, "Script Logo" phase tone and a more modern, in-your-face "Block Logo" phaser. Plus, the EVH 90 sports the greatest graphics in the history of rock: the red, white, and black stripes from Eddie's legendary Frankenstein guitar. Oh yeah—it's also got a bitchin' new blue LED. Now, how cool is that? Power: Single 9-volt battery or Dunlop ECB-003 AC Adapter

Review by Awkward sound 

Demo by Reverb 

EVH90 - EVH Phase 90 Red

PedalSafe Type A1

Schutzabdeckung & RockBoard-Montageplatte für Standard Single Pedale

Protective Cover & RockBoard Mounting Plate For Standard Single Pedals

Schutzabdeckung & universelle Montageplatte für Standard Single Pedale

Protective Cover & Universal Mounting Plate For Standard Single Pedals

ISO Power Block V10

ISO Power Block V6 IEC

Éloi Deraiche

60' heavy relic strat

compact tour board 2

hot rod duluxe

Der JHS Pedals 3 Series Flanger ist von den klassischen analogen Flangern der Vergangenheit inspiriert. Die intuitiven Regelmöglichkeiten für Blend, Rate und Intensity decken eine breite Palette von Vintage-inspirierten Sounds ab. Der schaltbare Tape-Modus erweitert den Effekt um Tape-ähnliche Sweeps. Dieser Modus ist vom echtem Tape-Flanging inspiriert, wie es in Studios durch Ändern der Geschwindigkeit von Bandmaschinen während der Wiedergabe praktiziert wurde. Jedes Pedal der 3 Series wird von JHS Pedals in Kansas City, MO, hergestellt. Wie man es von JHS Pedals kennt, überzeugen auch hier hochwertige Teile, eine zuverlässige Qualitätskontrolle und die Liebe zum Detail. Jedes Pedal kommt mit drei einfachen Regelmöglichkeiten und einem Schalter, die eine breite Palette an möglichen Sounds bieten und sowohl für Anfänger als auch für Profis geeignet sind. Die JHS Pedals 3 Series wurde entwickelt, um Musiker zu inspirieren und bei der Suche nach neuen Sounds zu einem absolut erschwinglichen Preis zu helfen.

The JHS Pedals 3 Series Flanger is inspired by the classic analog flangers of the past. The intuitive controls for Blend, Rate and Intensity cover a wide range of vintage-inspired sounds. The switchable Tape mode moves the sound into tape-like sweeps with zero through flanging. This mode is inspired by real tape flanging as done in studios by altering the speed of tape machines during playback. Each 3 Series pedal is made by JHS Pedals in Kansas City, MO, using high-quality parts, quality control, and attention to every detail. Each pedal has three simple controls and one toggle that offer a wide range of sounds, perfect for beginners and professionals alike. The JHS Pedals 3 Series will inspire your playing and help you explore new sounds at a totally approachable price point.

Review by delicious audio

3 Series Flanger

COMPADRE von Strymon