chuck hale

New Pedal Board

Tester

The Timmy pedal has always been known for it's ability to provide a transparent overdrive to your amplifier while retaining the amps original tone. It's a fairly common thing for an overdrive to color tone, so why invest in a $1500 plus amp only to change it's inherent sound, right?

At low settings you will be able to effortlessly achieve a sound that is simply "more" of what your amp already offers. As the gain is turned up, and the pedal's EQ adjusted accordingly, smooth, singing, round and reedy tones are at your fingertips.

The Timmy pedal's responsiveness is exactly like that of a great, tube amplifier in that it responds immediately to your right hand's attack.

The Paul Cochrane Timmy is absolutely a legend in the world of overdrive pedals, and has been copied to a large degree over the years by several knock offs. 

Paul Cochrane

Demo by Mass Street Music

Demo by Living Room GD

Timmy v3

Beetronics

Octahive

No pedal holds more mystique than the legendary Klon Centaur overdrive. With its unique overdriven tones and boosting capabilities, this pedal has captured the imagination of players from Jeff Beck to John Mayer

The Archer is an exact tribute to the legendary Klon pedal featuring germanium diodes and captures every nuance of the original unit 

J. Rockett Audio Designs

Product Page

Review by bonedo

Manual

Demo by Guitarist 

Demo by Shawn Tubbs

Demo by Pete Thorn 

Demo by J.Rockett Audio Designs

Archer

Darren Phillips

The new passive DOD Mini Expression Pedal is just the right size for your pedal board, and your wallet. Rugged all-steel construction and gear drive means that there are no strings to break. Despite its compact form factor it is designed to have the same feel and throw as pedals that are twice its size (and price).

The Mini Expression Pedal features a TRS (25kΩ)/TS (10kΩ)/RTS (25kΩ) selector, making it flexible to work with most gear with expression pedal inputs. The non-slip rubber pads, and a peerless industrial design by DB Instrument Amp insure a high quality expression pedal that will last the test of time.

Demo by Ryan Hogle

Review by musicradar

Review by reddit /guitarpedals

MINI EXPRESSION

Für 3-5 FX-Pedale - **318 x 142 mm / 12.52" x 5.59"** - erhältlich mit Gig Bag

For 3 - 5 FX pedals - **318 x 142 mm / 12.52" x 5.59"** - including Gig Bag

sank bunmanang

Lightweight 

Das TC Electronic Plethora X5 der dänischen Effektschmiede vereint die Vorzüge der beliebten hauseigenen Toneprint-Pedale mit der Praktikabilität einer vollen Multieffekteinheit. Das Pedalboard kommt dabei in sehr handlichen Maßen, bietet fünf zuweisbare Slots für die TC-Effektpedale mit bis zu 75 Toneprints und kann sogar durch die Vier-Kabel-Methode mit einem Amp eingesetzt werden.

The TC Electronic Plethora X5 from the Danish effects manufacturer combines the advantages of the popular in-house Toneprint pedals with the practicality of a full multi-effects unit. The pedalboard comes in very handy dimensions, offers five assignable slots for the TC effect pedals with up to 75 Toneprints and can even be used with an amp through the four-cable method.

TC Electronic

Demo by SweetWater

Demo by Riffs, Beard & Gear 

PLETHORA X5

Suhr

Riot Reloaded

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

On the stage

Kick your playing into high gear with SPARK MINI BOOSTER, a stompbox-wonder for the initiated that features a completely clean boost with some serious tone enhancement under the hood once you really start cranking things.

With a full 20 dB of boost, SPARK MINI BOOSTER is a great clean booster. But that’s not all it does – keep turning that knob and it’ll start working its magic driving gear into peak performance! No matter what your style or set-up, this musical miracle will maximize your potential – but let your core tone shine through completely unaltered.

PrimeTime is a radical new feature that is exciting guitarists around the globe. Put simply, SPARK MINI BOOSTER instantly understands whether you want the pedal to be on permanently when you hit the footswitch, or just when you hold the footswitch down. Which totally rocks for both ‘always-on’ and ‘emphasizing passages’ situations.

By adding a discrete, fully analog circuit, SPARK MINI BOOSTER adds a purely magical sense of life and excitement to your gear and tone. Each part of the circuit is carefully selected, from transistor to capacitor and from resistor to diode. What does that mean? Sweet, pure tone in all of its glory in an unparalleled clarity with zero coloration. Whether you want to make things sing or roar, this circuit ensures to maximize your tone.

Review by Daniel Rettberg

Demo by Reverb

Official Product Video

Spark Mini Booster

David Litaba

Auf den Namen HyperGravity hört das neue Multibandkompressor-Bodenpedal für Gitarristen aus dem Hause TC Electronic, dem man – um dynamisch auf dem Boden zu bleiben – den MD3 Kompressor-Algorithmus des Studiosystems 6000 des Herstellers spendiert hat.

HYPERGRAVITY COMPRESSOR is the missing link that will take your tone from good to great. Featuring no less than three amazing modes, HYPERGRAVITY COMPRESSOR includes a state-of-the-art multiband compressor, a cool vintage compressor, plus endless compression combinations through TonePrint.

Review by Music Radar 

Demo by Chords Of Orion 

Demo by TC Electronic 

HyperGravity Mini Compressor

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by Guitar World 

Polytune 3 Mini

MXR knows phasers. The Phase 90's compact size, superior construction, and refined sound put MXR on the map, and it set the standard by which all other phasers are judged. Two years later, MXR released the Phase 45—a mellower version of the effect favored for its ability to easily blend into a band's mix. Now, you can get both iconic circuits in a single pedal while tightening up your pedalboard at the same time. The Phase 95 combines the Phase 45 and Phase 90 circuits in a mini housing with about half the footprint of a standard MXR pedal. The 45/90 switch toggles between the Phase 45 mode's subtle two-stage phasing and the Phase 90 mode's more pronounced four-stage phasing, while the Script switch toggles between two phasing styles. The Phase 95 is set to modern style phasing by default, which relies on feedback to create light harmonic distortion and gives the effect a more accentuated swoosh. Engaging the Script switch removes feedback for a lusher, more subdued sound with higher headroom and greater clarity. The familiar Speed control sets the rate of the effect. The Phase 95 may be small, but it's full of rich phase tones, and it'll take a beating on the road.

Product Page 

Product Manual 

MXR Phase 95

M290 Phase 95

thuy nguyen

BOSS

Official Website

CE-2

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

In setting out to design Brigadier, we decided to take a super-powerful SHARC DSP and dedicate all of its horsepower to doing one thing and one thing only—delivering the best analog bucket brigade sound ever. We’ve utilized every last drop of DSP power, allowing Brigadier to deliver every minute detail and nuance that makes analog delays special. Our hand crafted, processor-intense dBucket algorithm delivers all of the sonic complexities of analog bucket delays with none of the drawbacks. No stone has been left unturned.

Brigadier gives you all of the tone and none of the noise of regular old bucket brigade chips, unless of course you choose to add it back with our exclusive Bucket Loss control. Go from warm and clean repeats all the way to noisy, saturated delays. Couple that with dedicated modulation and filter controls, tap tempo, and assignable expression pedal input, and you have yourself a versatile delay powerhouse.


Strymon

User Manual 

Product Demo 

Brigadier

Flavio Salcuni

SIMPLIFIER MK-II ZERO WATT REVERB STEREO AMPLIFIER : The state-of-the-art in analog amp simulation

The Simplifier MK-II takes the analog amp simulation to a new stage of realism. Much more options, while keeping the instant touch and dynamics that only an all analog device can manage.
All, in the same ultra compact footprint...

DSM & Humboldt

Demo by DSM & Humboldt

Demo by Guitar Bonedo

Simplifier MK-II

Die magische Kombination aus Tremolo und Reverb ist das früheste Beispiel für eine perfekte Verbindung von Gitarreneffekten. Erstmals in legendären Verstärkern der 1960er Jahre eingesetzt, hat dieses harmonische Zusammenspiel unzählige Aufnahmen und Live-Performances geprägt – von frühem Surfrock, swampigem Bayou-Blues, Spaghetti-Western und Film-noir-Soundtracks bis hin zu modernem Indie-Rock. Auch heute entdecken Gitarrist:innen die inspirierende Kraft dieses Traumpaars immer wieder neu.

Flint ist ein Studio-Qualitäts-Effektpedal, das genau diese klassische Kombination liefert. Wir haben unsere Lieblings-Tremolo- und Reverb-Schaltungen aus der Vergangenheit intensiv analysiert, ihre klanglichen Feinheiten untersucht und sie in unseren aufwendig entwickelten Algorithmen detailgetreu nachgebildet. Flint ist im Grunde zwei Pedale in einem – Tremolo auf der einen, Reverb auf der anderen Seite.

The magical combination of tremolo and reverb is the earliest example of a perfect guitar effects marriage. First pioneered within historic amplifiers of the 1960s, this harmonious coexistence has made its way onto countless records and performances — from early surf, swampy bayou blues, spaghetti westerns and film noir soundtracks, to modern day indie rock. As music moves forward, guitarists continue rediscovering the inspiration provided by this perfect pair.

Flint is a studio-class effects pedal that delivers this classic combination. We carefully studied our favorite classic tremolo and reverb circuits, examined the sonic complexities and faithfully accounted for every detail in our hand-crafted algorithms. Flint is essentially two pedals in one, with tremolo on one half and reverb on the other.

Review by Amazona 

Review by Guitar.com

Review by Pedal of the Day

Review by Six String Sensei

Demo by Made by Miike

Audio Examples

Flint

PedalSafe Type J

QuickMount Type J

Pedal-Montageplatte für mittelgroße Strymon-Pedale

Pedal Mounting Plate For Medium Size Strymon Pedals

Schutzabdeckung & RockBoard-Montageplatte für STRYMON Medium Size Effektpedale

Protective Cover & RockBoard Mounting Plate For STRYMON medium size effect pedals

Schutzabdeckung & universelle Montageplatte für STRYMON Medium Size Effektpedale

Protective Cover & Universal Mounting Plate For STRYMON medium size effect pedals

Das Original Crybaby Pedal, das viele zeitlose Rocksounds erzeugte und unter anderem von Größen wie Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour benutzt wurde.

When people talk about wah pedals, they're talking about the Crybaby. This is the original—the one that created some of the most timeless sounds in rock. Relied on by Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour, and many other greats Features: Heavy die cast construction for years of reliability, 100K ohm Hot Potz potentiometer that allows for that quick, abrupt wah sound. Powered by the Dunlop ECB-003 AC Adapter and/or 9 volt battery.

Dunlop

Official Product Page

Guitar World Demo

Demo by PMTVUK

GCB95 Cry Baby Standard Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Teeratai Kaewmanee

The Empress buffer+ was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal.

Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer+ is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.

Additionally, all the connectivity of your pedal board is consolidated to make set up quick and easy. The buffer+ also has a very handy set of features that make life just a little better. Noise filters, input pads, switchable clean boost and input loading are all powerful tools available on the buffer+

Empress Effects

Demo by woodnstrings

Demo by Empress Effects

Review by Talk Bass.com

Review by Soren Reiff

Review by Bass Musician

Manual download

Buffer+

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Joub the rube

Oft kopiert aber nie erreicht, rangiert das schwer zu findende, originale, Phase 90 bei den Sammlern alter Bodentreter ganz weit oben. Das Original - seit der Gründung der Firma Dunlop bis in die späten 70er Jahre erhältlich – definierte den klassischen Phase Shifter Sound und war in allen Musikstilen zu hören, egal ob Hard Rock, Jazz-Fusion oder Funk-Hits. Der nach dem Kultpedal der Firma designte Phaser kommt puritanisch mit einem Regler aus, über den der Phaser-Speed einstellbar ist. Eine rote LED über dem stabilen Fußschalter zeigt den Schaltstatus an. Das massive Spritzgußgehäuse verfügt über jeweils 1/4" Klinke In- und Out-Eingänge. Betrieben wird der Kulttreter mit einer 9V Batterie, die in einem leicht zugänglichen Batteriefach auf der Unterseite Platz findet. Es ist erhältlich in der ursprünglichen orangenen Farbe.

This device has found its way into many of Eddie Van Halen's recordings, adding a shimmery velocity to lead passages or a more dramatic swoosh to muted strumming. Not just for guitars; it works well with bass, keyboards and even vocals. Vary the speed from a subtle, long cycle to a fast, watery warble...and myriad vintage vibrations in between. Power: Single 9 volt battery or Dunlop ECB-003 AC Adapter - Controls: Footswitch toggles effect on/bypass (red LED indicates on) Speed knob varies rate of phase sweep

Review by Guitar Player

M101 Phase 90

Szabolcs Oláh

Ibanez TUBE SCREAMER Mini Overdrive-Pedal - Mini-Ausführung für mehr Platz auf dem Pedalboard - 100% Analog, True Bypass

The Ibanez Tube Screamer is one of the most beloved pedals in the world. Its ability to be used as a medium to low gain overdrive as well as being able to run as a clean or low gain boost made this a very popular pedal. This Mini Tubescreamer will fit on even the smallest of pedalboards without losing any quality of the original signal.

Ibanez

Review by GIGS & GUITARS

Review by Tone Pedia 

Demo by Alex Dinky 

Demo by Marty Music 

Demo by Ibanez Guitar 

Tube Screamer Mini

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

The beauty of the RAT2 lies in its versatility.  Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.  Do you have a powerful amp with too much headroom for the gig?  Let the RAT2 be your dirty channel.  Maybe you already love your amp’s distortion.  Use the RAT2 as a boost for solos and get the extra kick you need.
The RAT2 features the legendary RAT filter control.  Turn it to the right to roll off brittle high-end frequencies.  Having trouble cutting through the mix?  Turn it to the left and allow the natural brightness of your instrument to shine through.

ProCo

Review by the JHS Show

Review by delamar

Review by Guitar Chalk

Demo by intheblues

Rat 2

The MC404 CAE Wah was developed by Bob Bradshaw of Custom Audio Electronics and the Cry Baby design team with the goal of creating a highly versatile wah-wah of top-grade components. It features dual Fasel inductors with two distinct voices (high-end emphasis or low to mid resonance), and a built-in MXR MC401 Boost/LineDriver adds even more flexibility. Choose between inductors and turn the boost on or off with the side-mounted kickswitches; bright LEDs on each side of the wah indicate operation status. The MC404 boasts true hardwire bypass, a long-life CTS potentiometer, and internal pots for "Q" and gain adjustments.

Demo by ProGuitarShopDemos 

Review by PREMIER Guitar 

MC404 CAE Wah

El Capistan vereint drei verschiedene Bandmaschinentypen in einem Pedal, jeweils mit drei einzigartigen Modi und umfassender Kontrolle über Bandqualität, Maschinenzustand und Klangformung.

Wechseln Sie von der vollen Klangstabilität einer fabrikneuen Echomaschine bis zum stark schwankenden Klang eines renntauglichen Geräts. Genießen Sie den vollen Klang eines neuen Bandes oder die dunklen, rauen und vibrierenden Eigenschaften eines abgenutzten Bandes.

El Capistan provides three different tape machine types in one pedal, each with three unique modes and extensive control over tape quality, machine health and tone shaping.

Go from the full-range sonic stability of a fresh-from-the-factory echo machine, to the heavily fluctuating sound of a road-worn unit in need of service. Enjoy the full bodied sound of fresh tape, or dial in the dark, gnarled and vibey qualities of worn out tape.

Review by Elektronauts

Review by The Gear Page

Demo by strymon

El Capistan v2

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Tonex HX Effects

Konstantinos Gamatos

The OCD pedal is the only pedal that uses 2 x Mosfets configured as hard-clipping to 'Voltage reference" instead of the usual way: to ground." The earliest OCDs used 2 x Mosfets plus 1 x Germanium diode, but very quickly these diodes became harder and harder to find, and they became expensive.

Recently I stumbled across a reasonably large stash of the right kind of Germanium diodes so I ponied-up and bought all of them. So I decided to do a run of the ultimate OCD: a Custom Shop offering with a few circuit tweaks using 2 x Mosfets plus 2 x Germanium diodes, and one hell of a beautiful paint job... Metallic Teal with a chrome undercoat! This beauty morphs between blues and greens depending on the light and angle. And what would the ultimate OCD be without a Blue LED? The sound? Great definition, more tube-like feel, a bit wider dynamic range, more sustain, and a more focused single-note tone. And as with all Fulltone pedals... 100% Built in the USA.

Fulltone

OCD Ge

Das Tone City Sweet Cream ist ein Low-Gain Overdrive Pedal mit einer super smoothen, Verstärker-ähnlichen Ansprache. Das Pedal lässt sich für satt verzerrte Sounds hervorragend mit anderen Drive Pedalen stacken oder kann verwendet werden, um Clean Sounds einen kontrollierbaren, berührungsempfindlichen Overdrive zu verleihen. Das Sweet Cream ist auch ein perfektes Werkzeug, um bereits verzerrte Verstärker in die Sättigung zu bringen, um einen kräftigen, cremigen Drive Sound zu erzeugen. Der einzigartige Touch-Regler passt das grundlegende 'Feeling' und die Dynamik des Pedals sowie das allgemeine Tone-Setting an, anstatt wie ein klassischer Tone-Regler nur mit einem Treble Cut zu arbeiten.

The Tone City Sweet Cream is a low-gain overdrive pedal with a super smooth, amp-like response. The pedal stacks extremely well with other drive pedals for rich distorted sounds or can be used to give your clean signal a controllable, touch-sensitive overdrive. The Sweet Cream is also a perfect tool to push already driven amplifiers into saturation for a thick, creamy drive sound. The unique Touch control adjusts the general feeling and dynamics of the pedal as well as the overall tone setting, instead of just rolling of the high-end like a standard Tone control.

Tone City

Tone City Sweet Cream - Demo Video - W-Music Distribution

Tone City Sweet Cream - Demo Video - Andertons Music Co

Tone City Sweet Cream - Demo / Review Video - intheblues

Tone City Sweet Cream - Demo / Review Video - Have Guitar

Tone City Sweet Cream - Demo Video - Budget Pedal Demos

Tone City Sweet Cream - Demo / Review Video - gearmanndude

Tone City Sweet Cream - Demo / Review Video - The Tone King

Sweet Cream

Don Jordan

Das TS Mini ist eine kompakte Version des legendären Overdrive-Pedals von Ibanez aus der Tube Screamer-Reihe. Es bietet die klassischen Regler für Drive, Tone und Level in einem Gehäuse mit etwa halber Größe des Originals. Es verwendet True-Bypass-Schaltung und eine vollständig analoge Elektronik, um den saubersten Signalweg zu gewährleisten. Es ist für Pedalboards mit begrenztem Platz konzipiert, ohne den typischen Mitten-Boost-Charakter der Tube Screamer-Serie zu verlieren.

The TS Mini is a compact version of Ibanez’s legendary Tube Screamer overdrive pedal. It delivers the same classic drive, tone and level controls in a form-factor roughly half the size of the original. It uses true-bypass switching and 100% analog circuitry to preserve the cleanest signal path. It is optimized for pedalboards where space is at a premium while retaining the characteristic “mid-hump” overdrive that made the Tube Screamer family iconic.

Demo by Andertons Music Co

Demo by Marty Music

Review by Music Radar

Review by Premier Guitar

TS Mini

Wenn Burkhard Lehle etwas baut, dann richtig und ohne Kompromisse. Mit seinem Mono Volume Pedal hat er ein High End Pedal ohne die sonst bei Volumenpedalen auftretenden Nachteile konstruiert. Es wird kein mechanisches Poti verwendet - das Mono Volume arbeitet mit einem Magnet Sensor der ein hochwertiges VCA steuert. Dadurch ist der gesammte Regelbereich gleichmäßig und ohne Klangverlust, Verschleiß und Potikratzen gehören der Vergangenheit an. Desweiteren besteht die Möglichkeit, das Ausgangssignal um bis zu 10 dB zu boosten. Das Pedal läuft sehr gleichmäßig und ruhig, da die Pedalwippe in Low Friction Polymer Gleitlagern läuft. Zusätzlich steht ein gebufferter Direkt Out zur Verfügung der als Tuner Out oder zur Weiterleitung an weiteres Equipment genutzt werden kann. Das Pedal läßt sich durch den niederohmigen Ausgang auch in einem seriellen FX Loops eines Amps betreiben.

When Burkhard Lehle builds something, he does it properly and without compromise. With his Mono Volume Pedal, he has constructed a high-end pedal without the disadvantages that usually occur with volume pedals. No mechanical potentiometer is used - the Mono Volume works with a magnetic sensor that controls a high-quality VCA. This means that the entire control range is even and without loss of sound, wear and potentiometer scratching are a thing of the past. There is also the option of boosting the output signal by up to 10 dB. The pedal runs very evenly and quietly because the pedal rocker runs on low friction polymer plain bearings. There is also a buffered direct out that can be used as a tuner out or for forwarding to other equipment. The pedal can also be operated in a serial FX loop of an amp thanks to the low-impedance output.