Éloi Deraiche

jazzmaster

josh scott pedal board

deluxe reverb

Tester

Das Dispatch Master V3 ist ein Delay und Reverb Pedal, desen Effekte unabhängig oder gleichzeitig verwendet werden können. Es hat eine Verzögerungszeit von 1,5 Sekunden und einen dynamischen Nachhall, der von natürlich, geräumig bis tief und höhlenhaft geht. Es verfügt über Regler für Time, Repeats, Reverb und Mix und ist True Bypass. Die Version 3 ist mit der neuen Flexi-Switch™ -Technologie ausgestattet, die den Fußschalter sowohl als Momentary- als auch Latching-Schalter nutzbar macht und basiert auf einer geräuschlosen, relais-basierter Soft-Touch-Schaltung! Der Flexi Switch Momentary Modus wird aktiviert, indem du den Fußschalter so lange gedrückt hältst, wie du den Effekt verwenden willst. Lasse ihn los und dein Signal ist wieder dry. Um das Dispatch Master als normales Pedal zu verwenden, drücke den Schalter einfach einmal, um es zu aktivieren, und erneut, um es in Bypass zu schalten. Das Dispatch Master V3 wird in Ohio, USA handgefertigt.

The Dispatch Master V3 is a delay and reverb pedal, whose effects can be used independently or simultaneously. It has 1.5 seconds of delay time and a dynamic reverb that goes from natural and roomy to cavernous and deep. It features controls for Time, Repeats, Reverb and Mix and it's true bypass. The V3 version features the new Flexi-Switch™ Technology, which allows you to simultaneously use momentary and latching-style switching. It's based on the silent relay-based soft touch switching! It works by pressing and holding the footswitch for as long as the effect it's been used, releasing it, and resuming for dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass. The Dispatch Master V3 is hand made in Ohio, USA.

EarthQuaker Devices

Official Product Page

Manual

EarthQuaker Devices Dispatch Master Delay & Reverb Demo - EarthQuakerDevices

Dispatch Master Digital Delay and Reverb Video Manual - EarthQuaker Devices

EarthQuaker Devices & Juan Alderete Present: Dispatch Master on Bass - EarthQuakerDevices

EarthQuaker Devices Dispatch Master V3 - Demo Video - Musiker TV

Dispatch Master V3 - Digital Delay / Reverb

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Dieter Allaerts

The F-Stop brings two effects found in vintage American tube amplifiers into one pedal. The combination of a tube driven spring reverb with pulsating "bias" tremolo was first introduced in the early 1960s and has become a standard sound for guitar players and other instrumentalists ever since.

The F-Stop has been designed to bring classic tube amplifier effects into a small package that runs off of a 9VDC pedal power supply. Internally, the F-Stop has 18v of headroom so it can live as comfortably at the end of your signal chain as it does at the beginning. The spring portion of the pedal is digital, but the guitar signal path and tremolo circuit is 100% analog. 

The sound of bias tremolo and spring reverb is unmistakable, and the F-Stop uses modern electronics to achieve an authentic recreation of these effects with similar circuit topography as found in tube amplifiers.

Milkman Sound

Demo by Philip Czarnecki

Official Product Video

Product Page

Review by Acoustic Guitar Forum

Review by Pedal of the Day

Review by reddit /guitarpedals

Review by The Gear Page

F-Stop white

thuy nguyen

BOSS

Official Website

CE-2

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

FLASHBACK DELAY. The sounds, the vibe, TonePrints, the entire package - it was a smash hit that rocked the world. But at TC, we're more about moving things forward and listening to the feedback from the guitar community. And so, when wishes for things like presets and tap-tempo started rolling in, we listened. And boy, did we knock it out of the park.

TC Electronic

Review by musicradar

Demo by Reverb

Demo by ProGuitarShopDemos

FLASHBACK X4 DELAY

The Klon KTR Pedal is a revised edition of the legendary Klon Centaur. The circuit is designed completely by Bill Finnegan, and nails the sound of a genuine Centaur. This Klon KTR can produce transparent boost to warm rich overdrive tones, all with the signature mid-range boost that it is famous for.

The Klon KTR is best used pushing a tube amp that's on the edge of breaking up. The KTR is designed to overdrive the amp further into breakup, producing a lively and dynamic lead tone. Besides its obvious mid-range voicing, it is a rather transparent overdrive pedal that wedges its way into your amp to really make it sing in a focused, classic rock and roll kind of way.

Klon By Bill Finnegan

Demo by Curtis Kent

Demo by intheblues

Instagram Channel

Review by Legendary Tones

Review by Anatomy of Guitar Tone

Review by Guitars for Idiots

KTR - Klon 3

Über die Jahre hat sich das Morning Glory zweifellos zum bekanntesten und meistgepriesenen JHS Pedal entwickelt. Er wurde ursprünglich in 2009 aus Bedarf an einem Overdrive Pedal entwickelt, das den Sound eines Amps nimmt und ihn aufs nächste Level katapultiert ohne Mitten und den Klangcharakter eines TS-Style Overdrives hinzuzufügen. Das Ziel war ein einfaches Pedal, verdammt transparent – nicht mehr nicht weniger. Egal ob du Strat oder Paula spielst, du wirst sofort feststellen wie gut das Morning Glory auf deine Spieldynamik anspricht und das Feel deines Instruments dabei 100 % intakt lässt.

Over the years the Morning Glory is undoubtedly JHS’ most known and praised overdrive pedal. It was created in 2009 out of a need for an overdrive pedal that simply took a guitar and amplifier’s tone to the next level without adding strong mid frequencies or any other characteristic that came along with the Tubescreamer style circuits on the market. Its goal was, and still is, to be incredibly easy to use and to be the most transparent overdrive out there. Whether you play a Stratocaster or a Les Paul, you will instantly recognize how the Morning Glory is touch sensitive and keeps 100% of your instrument’s feel in place.

JHS Pedals Morning Glory V4 - Review Video - Musiker TV

JHS Pedals Morning Glory V4 - Demo - Musiker TV

JHS Morning Glory V4 Short-Demo by Musiker TV

JHS Morning Glory V4 Demo by Bonedo

JHS Morning Glory V4 - Livingroom Gear Demo

JHS Morning Glory V4 Review Bonedo DE

Morning Glory v4

PedalSafe Type B1

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale, Mooer GL 100

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals, Mooer GL 100

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

Review by Charleston Classical Guitar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Die Pitch Fork von Electro Harmonix in unserem aktuellen bonedo-Test beweist einmal mehr, dass auch Pitch-Shifter Effektpedale inzwischen für jedes Budget erschwinglich sind. Dieser Effekt, der in den Achtzigern in einigen berühmten Gitarrenaufnahmen auftauchte, war damals für uns “normale” Musiker kaum erschwinglich. Aber diese Zeiten haben sich glücklicherweise geändert. Pitch-Effekte sind inzwischen im Effektangebot vieler Hersteller zu recht günstigen Kursen zu finden.

The EHX Pitch Fork transposes an instrument’s pitch over a +/- three octave range and features three modes which allow the pitch to be transposed up, down or both, simultaneously. The pitch shift amount can be set to a fixed interval or continuously varied by an expression pedal or control voltage.

Electro-Harmonix

Demo by Chords of Orion

Demo by Reverb 

Review by musicradar 

Review by bonedo 

Pitch Fork

PedalSafe Type A2

QuickMount Type A

Schutzabdeckung & RockBoard-Montageplatte für ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & RockBoard Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Schutzabdeckung & universelle Montageplatte ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & Universal Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Dan Stanek

This pedal is based on the 1960s British Dallas Rangemaster, which was best at the time to give a treble and gain boost to the dark British amps. This allowed them to get a sound more in tune with the time, as guitars were starting to become a loud, bold, lead instrument. This pedal is a type of BOOSTER, not really a distortion pedal nor a clean boost- it does modify your sound quite a bit. It excites certain frequencies and pushes your amp to allow it to create rich tube distortion. The pedal colors your tone, with a crunchy overdrive, boosting certain frequencies, and warming the tone with NOS germanium transistors. It does not have a lot of compression and sustain like most OD pedals, but a more raw, open sound.

Analogman

Demo by Joe Perkins

Beano Boost Mini

PedalSafe Type L

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & RockBoard Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Schutzabdeckung & universelle Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & Universal Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

In den Fußstapfen des lange ausgelaufenen JHS Mr Magic kommt nun der finale Akt was Boosts angeht... der Prestige! Ob als Buffer, Boost oder Tone Enhancer, der Prestige wird als essentieller Teil deines Rigs erweisen! Mit dem Boost Regler auf 0 hast du einen erstaunlichen Buffer/Enhancer für lange Kabelwege, sowie ein Tool um dein Rig wieder zum Leben zu erwecken. Die ersten 25 % des Regelwegs bieten dir unterschiedliche Klangfarben mit leichter Pegelanhebung. Gegen 12 Uhr hast du einen kraftvollen dynamischen Solo-Boost, der deinem Sound genug Definition und Klarheit für Solos oder Leads gibt. Weiter aufgedreht hast du genug Boost um deinen Röhrenverstärker in den Break-Up zu schicken und auf dem letzten Viertel geht’s Richtung Kernschmelze – im bestmöglichen Sinne des Wortes. Reiches, schreiendes Sustain, natürlicher Break-Up und bei einigen Amps ein warmer fuzziger Growl.

In the footsteps of JHS’ long-ago discontinued Mr Magic pedal, they now bring you the "final act" in boost magic...The Prestige! From buffer, to boost, to tone enhancer, the Prestige will prove to be a vital and necessary piece of gear for anyone's rig. With the boost knob set to zero, you have in your hands an amazing buffer/enhancer for long cable runs as well as a tool that will simply add some life back into your rig. When the Boost knob is in the first 25% you will get different flavors of the buffer/enhancer as well as slight volume increases. When the Boost knob is set between 25% and 50% you have a powerful, dynamic solo boost that adds definition, clarity and a little magic to your solos and lead passages. When set at 50% or more, the Prestige gives you the ability to break up your tube amp in a smooth and natural way resulting in real tube overdrive from the preamp section of your tube amp. The last 25% of the volume range can completely destroy your amp in the best way possible, resulting in rich soaring sustain, breakup, and on some amps even a smooth warm fuzzy growl.

JHS Prestige - Livingroom Gear Demo

Prestige

Pink Floyds "Breathe", Jimi Hendrix "Star Spangled Banner live in Woodstock 1969" und Robin Trower's "Bridge of Sighs" zementierten den Sound eines photozellen-basierten Vibe-Effekts als E-Gitarren-Standard. Das Unicorn ist die JHS Version dieses einfallsreichen Effekts und setzt die inspirierenden Modulation / Phasing / Rotary-Sounds fort, die immer neue musikalische Grenzen sprengen. Das Unicorn macht alles mit nur vier Knöpfen und einem Mini-Toggle-Schalter. In einer Zeit, in der alles gesehen und getan wurde, bringt JHS dir den allerersten, 100% analogen Photozellen-Modulator mit Onboard Tap Tempo.

Pink Floyd’s “Breathe,” Jimi Hendrix’s live Woodstock performance of “The Star-Spangled Banner,” and Robin Trower’s “Bridge of Sighs” cemented the sound of a photocell-based vibe effect as an electric guitar standard. The JHS Pedals Unicorn is our version of this heralded effect, continuing the inspiring modulation/phasing/rotary sounds that never fail to push musical boundaries. And just like the originals, we included a toggle for choosing between a Uni-Vibe* effect and a traditional vibrato setting. What sets Unicorn apart from all other vibe-style circuits is that it is the first-ever fully analog, photocell-based vibe with tap tempo as well as ratio, external tap control, and external rate control via expression pedal (optional). And the Unicorn does it all with only four knobs and a mini-toggle switch. In a day and age when everything has been seen and done, we bring you the first-ever, 100% analog vibe photocell modulator with onboard tap tempo.

JHS Pedals, Unicorn V2

JHS Pedals Unicorn V2 (demo)

JHS The Unicorn V2 - Review by Gitarzysta [PL], [07-2020]

Unicorn V2

PedalSafe Type B2

Schutzabdeckung & RockBoard-Montageplatte für WALRUS ARP-87 & Monument V2 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS ARP-87 & Monument V2 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS ARP-87 & Monument V2 Pedale

Protective Cover & Universal Mounting Plate For WALRUS ARP-87 & Monument V2 pedals

Domino is an analog octave, based on the classic ringer. The effect can be ring mod-like or up an octave, depending on your playing. Right jack is input and left jack is output.

Land Devices

Demo by 60 Cycle Hum

Demo by Guitarsenal

Domino

David Litaba

The Fuzz Face was released in 1966 by Dallas Electronics Ltd. and is one of the most iconic fuzz pedals ever made. This British fuzz is recognized instantly by its "Smiley Face" enclosure that was developed after Mr. Arbiter used the circular base of a microphone stand as inspiration. It is one of the first things we think of when we hear "fuzz pedal" because it lived at the feet of the great Jimi Hendrix. The Fuzz Face was released just a few months after the Sola Sound "Tonebender" 1.5 hit the market, and upon investigation, it is an almost identical circuit. The original Fuzz Face manual even said that it was a "battery-powered TONE-BENDING unit," clearly showing its inspiration. Though the circuit is much like the Tonebender MK1.5, the tone is very different. It possesses a very full and thick fuzz sound with roaring low-end frequencies. I can't help but think of how this made the three-piece Jimi Hendrix Experience sound larger than life. The most amazing feature of this fuzz is its ability to change into something magical as you roll your guitar volume down. Many of Hendrix, as well as players like Eric Johnson's clean tones, are in fact, the Fuzz Face with the fuzz control maxed, but the guitar volume turned way down. This setting results in an unreal and almost mythical light overdrive that you have to feel and hear to understand. As with most classic fuzz pedals, it loves a dirty amp or overdrive afterward in the signal path. Staying true to the original, I used high-grade carbon composition resistors, oversized capacitors, and two germanium transistors that I hand-matched to the circuit.

Each small batch of Fuzzes will use different transistors as it is challenging to find reliable sources of these devices in large quantities. The circuit uses vintage positive ground voltage, so do not daisy chain your power with other pedals. Inside the pedal is a battery snap or use any isolated power supply with a standard polarity power cable like your other pedals as I have wired it internally to work that way. The Fuzz is identical to the original except that I adjusted the taper of the pots to feel more intuitive. I also added a single power supply filter capacitor to help with noise and adjusted one resistor value for more volume. The switching is true-bypass. Each pedal in this batch is built-in identical form, but because of parts tolerances and the slight variance in the transistors, they will all be a bit different while still being the same. Be sure to always have this pedal first in your signal chain; the guitar must be plugged into its input due to the impedance it requires on its input, no exceptions. 

Product Review 

Product Page 

Product Demo 

1966 Series Fuzz

RockBoard

ISO Power Block V16

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

sank bunmanang

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Run and gun

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

Review by AMAZONA 

Review by GUITAR World 

Demo by TC Electronic 

Demo by Guitar World 

Polytune 3 Mini

The Cali76 Compact Deluxe is an all-analogue recreation of the legendary Urei® 1176® studio compressor, with an unmistakable sound heard on countless classic albums. This studio-grade FET compressor uses Class-A, low-noise circuitry and a dedicated parallel compression control to bring your favourite recorded guitar tones to your pedalboard.

Origin Effects

Review by that guitar lover

Review by Sound on Sound

Demo by Living Room GD

Demo by Sweetwater

Cali76 Compact Deluxe

Aarón Ayala Vásquez

The Volume (X) Mini Pedal controls volume and FX parameters without crowding your pedalboard, featuring a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4's rocker tension is fully adjustable.

Dunlop

Volume mini

Ibanez

TS-808 Tubescreamer

QuickMount Type F

Pedal-Montageplatte für Standard Ibanez TS / Maxon Pedale

Pedal Mounting Plate For Standard Ibanez TS / Maxon Pedals

Patrick Dougherty

With a massive display upgrade, an entirely new processor and a never-before-seen array of connections, MC6 PRO is by far the most powerful and user-centered MIDI controller yet.

Morningstar Engineering

Morningstar Product Page

Review by Gearspace

Review by Six String Sensei

Demo by SON WU

MC6 Pro

Line 6 HX Stomp Red Limited Edition ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Limited Edition HX Stomp Red!

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by bonedo

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Red Limited Edition

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

serus j

New Pedal Board

overdrive special

TU-3S Tuner

Tristan Stevens

Cory Wongs charakteristisches Press-Pedal mit seinen persönlichen Merkmalen
Echter Bypass
4-in-1-Funktionalität (Volume, Expression, Wah, Volumen/Wah) 
Neue zweifarbige STATUS-LED-Leiste, die den Modus und die Position des Pedals in Echtzeit anzeigt 
Corys eigene Lautstärkekurve und Wah Q-Regler
Klassischer Wah-Ton mit flexiblem Tonumfang
Aktive Lautstärkeregelung für einen verlustfreien Ton 
Separate Tuner- und Expression-Ausgänge für mehr Anschlussmöglichkeiten 
Stromversorgung mit 9V DC oder 9V Batterie

✪ Cory Wong’s signature Press pedal featuring his personal specs

✪ True Bypass

✪ 4 in 1 functionality (volume, expression, wah, volume/wah) 

✪ New dual-color STATUS LED strip indicating pedal mode and position in real time 

✪ Cory’s custom volume curve and wah Q control

✪ Classic-voiced wah tone with flexible tonal range

✪ Active volume design for keeping lossless tone 

✪ Separate tuner and expression outputs for more connection possibilities 

✪ 9V DC or 9V battery power supply

Wong Press

KTR - Klon 3 von Klon By Bill Finnegan