charlie day

Thunderbird 

Das RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay für Pedalboards bietet eine einfach zu realisierende, kabellose Verbindung zwischen deinem Instrument und deinem Pedalboard. Dabei nutzt es eine digitale Wireless Technologie, die eine beeindruckende Klangqualität, ein einfaches Setup und eine zuverlässige Nutzung für aktive Musiker garantiert. Das Wireless System arbeitet im 2,4 GHz ISM Band und kann so weltweit ohne Beschränkungen genutzt werden. Mit einem nutzbaren Frequenzbereich von 20 Hz - 20 kHz und nur 5 ms Latenz bleiben keine Wünsche offen. Die Patchbay-Sektion wurde entwickelt um Verbindungen und Anschlüsse des Pedalboards von der Unterseite nach außen zu führen, dir einen zentralen Zugangspunkt zu deinem Setup zur Verfügung zu stellen und um deine Kabelwege aufzuräumen und sortieren zu können. Die A, B, C und D TRS Buchsen sind als direkte, durchgängige Verbindungen von der Vorderseite des MOD 4 zu den entsprechenden Buchsen auf der Rückseite verkabelt. Damit kannst du deine Effekt-Kette so einrichten, dass du bei der Vorbereitung auf den Gig lediglich Kabel an der Vorderseite des Boards einstecken musst, anstatt unter dem Board zu hantieren.
- Wireless System Receiver + Patchbay für Pedalboards, inkl. Wireless Transmitter
- 2,4 GHz ISM Band für weltweite Nutzung
- 30 m durchschnittliche Reichweite (ohne Hindernisse)
- 24 bit / 48 kHz unkomprimierte digitale Signalübertragung
- 20 Hz - 20 kHz Frequenzbereich
- 5 ms Latenz
- 103 dB Dynamikbereich
- 85 dBm HF-Empfindlichkeit
- 0.2% Verzerrung (THD)
- 4 wählbare Kanäle
- passend für MOD Slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4x 6,3 mm Stereo-Klinke Thru (TRS)
- 1x 6,3 mm Mono-Klinke Receiver Audio Ausgang (TS)
- 1x DC 2,1 x 5,5 mm Hohlstecker Thru
- 1x AC IEC Thru
- 1x USB Type A Charge Ausgang
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Batteriebetrieb nicht unterstützt
- Stromaufnahme 500 mA
- passiver Betrieb möglich (nur Patchbay, ohne Wireless System)
- Abmessungen mit Frontplatte (B x T x H): 175 x 85 x 47 mm
- Abmessungen ohne Frontplatte (B x T x H): 160 x 85 x 33 mm
- Gewicht 500 g
- Wireless Transmitter, zwei Antennen, ein USB Kabel, Montageschrauben und Muttern im Lieferumfang enthalten

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
- wireless system receiver + patchbay for pedalboards, incl. wireless transmitter
- compatible with guitar wireless system
- 2.4 GHz ISM band for worldwide use
- 30 m / 100 ft. approx. range (without obstacles)
- 24-bit / 48 kHz uncompressed digital transmission
- 20 Hz - 20 kHz frequency range
- 5 ms latency
- 103 dB dynamic range
- 85 dBm RF sensitivity
- 0.2% total harmonic distortion
- 4 selectable channels
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- detachable front plate for mounting on top or underneath pedalboards
- 4x 6.3 mm / 1/4" stereo thru (TRS)
- 1x 6.3 mm / 1/4" mono receiver audio output (TS)
- 1x DC 2.1 x 5.5 mm barrel thru
- 1x AC IEC thru
- 1x USB Type A charge output
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- battery operation not supported
- current draw 500 mA
- passive operation possible (patchbay only, without wireless system)
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 500 g / 1.1 lbs
- incl. wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

New Pedal Board

ABM600

Tuwi Yuwi

The Lucydreamer is a Dry / Wet overdrive created with today’s bass masters’ needs and wants in mind.

It packs the following functions / features:

Dry / Wet Mix control

High-gain-stage footswitch which doesn’t affect the dry signal’s level

Internal trimmer to set the high-gain stage’s output level

Its overdrive circuit can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube-amp-like break-up, all the way to full- bodied high-gain saturation!

Owing its clipping merits to our “secret” chip, the Lucydreamer fluently tackles all the traditional tasks of an overdrive pedal and at the same time invites you to discover new ways of bonding with your bass lines!

Widen your palette of sounds, minimize pedalboard real estate and elevate your tone with the Lucydreamer!

Jam Pedals

Review by reddit /basspedals

Product Page

Manual

Demo by Zachary Rizer

Demo by Patrick Hunter

Demo by Nate Navarro

Demo by BassTheWorld.com

LucyDreamer Bass

PedalSafe Type B3

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale, Mooer GL 100

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals, Mooer GL 100

Schutzabdeckung & RockBoard-Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS MAKKO D1 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & Universal Mounting Plate For WALRUS MAKKO D1 pedals

Tester

JAM pedals’ unabashed distortion monster. We pulled out all the stops to make sure the Rattler will get you all the amazing tones of great early 80s ProCo RAT® distortion boxes and put in the time and R&D to make it more responsive to your playing resulting in an open, dynamic, overdriven tube-amp feel!

Its symmetrical clipping circuit and of course the legendary LM308 chip, the featured star of this design, are the main ingredients of a great recipe resulting in the Rattler shining through any rig, whether modern or vintage.

Enjoy fat and creamy distortion courtesy of the devious snake!

Demo by Chris Kollias

Demo by BassTheWorld

Rattler Bass

Christian Wistl

Bass is the bedrock of your band, and the Two Notes ReVolt Bass's all-analog signal path, complete with a 12AX7 preamp tube — run at a healthy 200V — ensures a stand-out sound in any application. The ReVolt Bass's three channels deliver the full gamut of tones, from high-headroom cleans to old-school dirt to modern drive. You also get an integrated Dry/Wet blend for extra tone-shaping power. An analog speaker simulation ensures a polished, miked-cab sound, both onstage and in the studio. Integrating the ReVolt Bass with the rest of your rig is a cinch, thanks to a 4-cable mode, an FX loop, and MIDI I/O. This bass preamp pedal also includes a collection of ten DynIRs for situations where you need more DI flexibility. Bassists searching for a robust, made-to-move solution for their pedalboards and fly rigs will get tons of mileage out of the Two Notes ReVolt Bass.

Two Notes Audio Engineering

Review by Sound on Sound

Review by bonedo

Demo by Sweetwater

Official Product Video

ReVolt Bass

The upgraded version of the Vintage Deluxe features the warm, tube-like tones of the Microtubes Vintage and adds a 4-band active EQ, Low and High mid frequency switch, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag.

darkglass 

Demo by Musicmaker

Review by reddit /Bass

Manual Pages

Vintage deluxe V3

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

Review by reddit /guitarpedals

StroboStomp HD

Danielo Olivera

Das Volume (X) Mini-Pedal steuert Lautstärke und Effektparameter, ohne Ihr Pedalboard zu überladen. Es verfügt über ein leichtes Aluminiumgehäuse, ein aggressives, rutschfestes Profil und unser patentiertes Low Friction Band-Drive für einen reibungslosen Bewegungsbereich und eine gleichbleibende, zuverlässige Leistung. Für maximalen Komfort und Präzision ist die Wippspannung des DVP4 vollständig einstellbar.

The Volume (X) Mini Pedal controls volume and FX parameters without crowding your pedalboard, featuring a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4's rocker tension is fully adjustable.

Dunlop

Volume X Mini Pedal DVP4

ch ray

Wenn Sie mehrere Gitarren mit unterschiedlichen Pegeln verwenden, können Sie mit TheGigRig Three2One V2 mühelos zwischen ihnen wechseln und die integrierten Vorverstärker verwenden, um die Pegel auszugleichen. Außerdem können Sie das Signal von der verwendeten Gitarre an den Tuner-Ausgang senden, um es auf der Bühne geräuschlos zu stimmen.

Der GigRig Three2One-Gitarrenwähler verfügt über drei Eingänge. Sie können jetzt problemlos zwischen 1-3 Gitarren oder sogar Line-Pegel-Eingängen wie Keyboards oder Drumcomputern wechseln!

If you use multiple guitars with varying levels, TheGigRig Three2One V2 allows you to switch effortlessly between them and use the built in preamps to balance the levels as well as sending the signal from whatever guitar you're using to the Tuner Out for silent on-stage tuning.

The GigRig Three2One guitar selector features three inputs. You can now switch easily between 1-3 guitars or even line level inputs such as a keyboards or drum machines! 

GigRig

Review by musicradar

Review by The Gear Page

Three2One V2

Das TC Electronic Sentry nimmt sich als Noisegate-Pedal den Problemen an, von denen vor allem Singlecoil-Spieler sowie Hard- und Heavy-Gitarristen ein Lied singen können. Die Rede ist natürlich von unerwünschten Nebengeräuschen, die gern in Form von Einstreuungen oder stärkerem Rauschen auftreten und uns das Leben schwer machen.

The TC Electronic Sentry is a noisegate pedal that addresses the problems that single-coil players and hard and heavy guitarists in particular can tell you a thing or two about. Of course, we're talking about unwanted noise, which often occurs in the form of interference or stronger noise and makes life difficult for us.

TC Electronic

Review by Bonedo 

Demo by Science of Loud

Sentry Noise Gate

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Lee-Ping Jiang

And the party does not stop …Ever!!!
Essential to keeping the groove moving is bass. Lots and lots of bass.
Can’t have too much, just not possible.
And from this universal truth the Octatron was born.
Bringing one million years of cosmic funk into a compact pedal capable of creating the eternal groove.
All analog, all the time.
From deep dub to smooth grooves, the Octatron is the magical box for all things bass.

Seamoon FX

Review by Bass Gear Mag

Demo by Premier Guitar

Demo by the wetter bass

Octatron

Der MXR Bass Chorus Deluxe basiert auf reiner analoger Bucket-Brigade-Technologie, die schimmernde, flüssige Chorus- und rauschende, metallische Flanger-Effekte liefert und dabei den Punch und das Fundament deines Low Ends bewahrt.

Der Bass Chorus Deluxe verfügt über Flanger- und X-Over-Tasten auf der Oberseite mit LED-Statusanzeigen. Im X-Over-Modus wird die Modulation in den tiefen Frequenzen auf 100 Hz abgesenkt - perfekt für das Spielen von Akkorden, Melodien und Fills in den oberen Registern, während die tiefen Frequenzen in der richtigen Stimmung bleiben. Mit den Reglern für Bass und Treble können Sie die Tiefen und Höhen absenken oder anheben und den Klangcharakter des Effekts gestalten. Für einen breiten Stereosound können Sie über einen internen Schalter den TRS (Tip-Ring-Sleeve) Stereo Hardwire Bypass Mode wählen. In diesem Modus können Sie ein TRS-auf-TS-(Tip-Sleeve)-Y-Verteilerkabel verwenden, um das Effektsignal an zwei verschiedene Verstärker zu senden, so dass die Modulation von links nach rechts wandern kann.

The MXR Bass Chorus Deluxe is powered by pure analog bucket-brigade technology, serving up shimmering, liquid chorus and swooshing, metallic flanger effects while preserving the punch and fundamental of your low end.

The Bass Chorus Deluxe features top-mounted Flanger and X-Over buttons with LED status indicators. In X-Over Mode, modulation in low frequencies is decreased at 100Hz—perfect for playing upper register chords, melodies and fills while keeping the low end in tune. With Bass and Treble controls you can cut or boost lows and highs and shape the tonal character of the effect. For a wide stereo sound, select the TRS (tip-ring-sleeve) Stereo Hardwire Bypass Mode via an internal switch. In this mode, you can use a TRS to TS (tip-sleeve) Y-splitter cable to send the effect signal to two different amplifiers, allowing the modulation to move from left to right.

Demo by The Bass Channel

Review by Premier Guitar

Review by Basschat

Review by Talk Bass.com

Review by Bonedo

M83 Bass Chorus Deluxe

Dieses Pedal kombiniert den satten Klang des Harmonic Booster mit der Präzision einer Parallelkompression mit einstellbarem Frequenzbereich und bietet Ihnen unübertroffene Kontrolle. Mit einem 6-Band-EQ, einer Pegelreduzierungsanzeige und der Option, 7 benutzerdefinierte Impulsantworten über USB zu laden, bietet es ultimative Klangflexibilität für Bassisten aller Genres. Pur, kraftvoll und präzise – Ihr sauberer Ton, perfektioniert.

Combining the rich tone of the Harmonic Booster with the precision of an adjustable frequency range parallel compression, this pedal gives you unmatched control. With a 6-band EQ, gain reduction meter, and the option to load 7 custom Impulse Responses via USB, it delivers ultimate tonal flexibility for bass players of any genre. Pure, powerful, and precise—your clean tone, perfected.

Darkglass Electronics

Demo by IvanBassist

Review by No Treble

Review by sinusoidal music

Review by Bass Musician Mag

Review by gearnews.de

Manual Page

Luminal Booster Ultra

RockBoard

ISO Power Block V12 IEC

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Badger

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Bass Pedal Board (Wah layout - V2.0)

MOOER

Official Product Page

Pitch Box

PedalSafe Type K1

QuickMount Type K

Pedal-Montageplatte für Mooer Micro Series Pedale und ToneX One

Pedal Mounting Plate For Mooer Micro Series Pedals and ToneX One

Schutzabdeckung & RockBoard-Montageplatte für MOOER Micro Series Effektpedale

Protective Cover & RockBoard Mounting Plate for MOOER Micro Series effect pedals 

Schutzabdeckung & universelle Montageplatte für MOOER Micro Series Effektpedale

Protective Cover & Universal Mounting Plate For MOOER Micro Series effect pedals 

Josh Johnson

The MC3 is a fully programmable controller, capable of sending up to 16 different MIDI messages per switch.

Morningstar Engineering

The PLASMA Pedal creates heavy distortion by amplifying an audio signal up to 3500 Volts and transforming it into electrical discharges. You are literally playing a bolt of electricity.

Gamechanger Audio

Website

Plasma Pedal

Mark Dodgeon

Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.

BOSS

Octave OC-5

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

In memory of one of the (if not THE) last true rock’n’roll icons, OKKO presents the MOTÖRBASS pedal. You’re all familiar with Lemmy’s signature sound – ultra powered rumbling grind, distorted, slightly fuzzy but with a lot of edge and definition for high speed hammering powerchords.

It would be presumptuous to claim you could get the exact sound of the iconic modified Marshall Super Bass stack from a 9-volts-powered box... but we did a lot of tweaking to capture that sonic character and we’re pretty happy with the result.

When trying the recreate the Lemmy sound with distortion pedals you easily run into problems. Bass distortions often lack the aggressive edge or get muddy when playing chords. Guitar distortions usually cut too much low end and often sound too fizzy. The MOTÖRBASS runs on an internal voltage of 24 volts*. Paired with carefully chosen filtering, this massive headroom ensures for a raw but tight distortion sound all across the fretboard.

Controls are easy: FASTER controls the gain from almost clean to full blast. HARDER works on the upper mids. Lower settings sound more rounded, turning up adds aggressive bite and attack. LOUDER? Hmm....

The MOTÖRBASS is not only for die hard Motörhead fanatics but for every bass player wanting a powerful, tight rock sound. Now, grab a pick and PLAY HARD!
Btw., don’t lend it to your guitar player, chances are you’ll never get it back...

Okko FX

Demo by MrExcane

MOTÖRBASS

Alex  Wilkins

When we released our original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better. 
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a fully variable sidechain high pass filter, and a two position ‘tone + colour’ circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.  

Empress Effects

Review by bassic

Review by CompressorPedalReviews

Demo by Pertybass

Bass Compressor Blue Sparkle

JakobSlash

POLYTUNE 3 NOIR is destined to become the favorite mini pedal tuner for those going for a darker, more monochromatic manner of expression. Sometimes you want to keep things understated, classical. The midnight black powder coating compliments the stylistically oriented pedalboard – while keeping your signal crisp and your tone in tune.

Quick Start Guide

Demo by  Serpent Molurus

Official Product Video 

Demo by Pedals At Dawn

Polytune 3 Noir

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

TAI  TONG YEE

Welch schönes Thema doch Effekte und Amps sind, nicht wahr? Seit den ersten Bodentretern Mitte des vergangenen Jahrhunderts faszinieren sich fast alle Gitarrist:innen für die Boxes of Goodness. Seit der Einführung der Digitaltechnik in die Effektgerätbranche werden die Kisten heiß diskutiert. Gerade die Modeling-Technik und später das Capturing/Profiling lösen immer wieder große und lange Diskussionen in den Online-Portalen (oder am heimischen Gitarren-Stammtisch) aus.

"Upgrade" is more than a 7-letter word. It embodies the continuation and evolvement beneath
the surface, and embraces revolution and creativity outside the box.
It’s what Ampero II Stomp does. Throughout years of grinding to establish its core technologies
from empirical practice, Hotone team proudly presents this soul partner for your
sophisticated taste in the sound of the music.

HOTONE

Review by Preshan John, audiotechnology.com

Review by Simon S, amazona.de

Demo by Andetons Music Co

Demo by Sonic Drive Studio 

Demo by Bernd Kiltz - Gitarrenvideos

Ampero II Stomp

Breandan Malone

The Laney Digbeth DB-PRE is designed to give you the freedom to take your bass sound with you anywhere you go. Featuring both FET & TUBE signal paths and with incredible tone shaping capabilities, the DB-PRE is loaded with comprehensive ins/outs allowing it to be your main standalone bass tone as well as part of any existing bass rig. Perfect for the versatile bass player who wants total control over their sound.

Laney Amplification

Review by Gitarre & Bass 

Demo by Andertons 

Demo by PMTVUK

Demo by The Bass Channel 

Digbeth DB-PRE

Syd Duning

Das Power Fuzz Wah ist ohne Zweifel einer der großen Morley-Klassiker. Die 20/20 Version kommt in einer kompakten, Pedalboard-freundlichen Größe und bietet zusätzlich ein schalterloses Design zur Aktivierung des Wah Effekts. Das 20/20 Power Fuzz Wah bietet Morleys breitesten Frequenzbereich für den Wah-Sweep und erzeugt in Kombination mit der Fuzz-Schaltung einen monströsen Fuzz Wah-Sound, der andere Wah Pedale erzittern lässt.

The Power Fuzz Wah is without a doubt one of the great Morley classics. The 20/20 version comes in a pedalboard friendly size and features the acclaimed switchless activation. The 20/20 Power Fuzz Wah offers Morley's widest frequency sweep and when combined with it's Fuzz circuit delivers monstrous Fuzz Wah tone that will send other Wah pedals into hiding.

Morley

Morley MTPFW - 20/20 Power Fuzz Wah - Demo / Review Video - Sweetwater

20/20 Power Fuzz Wah

pietro fiorini

A board that works perfectly with my 4 strings Fender Deluxe PJ and my 5 Strings PJ Sadowsky

Deluxe PJ (4 strings)

Italian Hard and Pop Rock Bass Board

Vincent  Raillard

TC ELECTRONIC ist ein Synonym für einige der bestklingenden Reverbs auf dem Markt - denken Sie an einen Song mit Hall, den Sie in den letzten 20 Jahren gehört haben, und die Wahrscheinlichkeit ist groß, dass er von uns stammt. Wir sprechen hier von Michael Jackson über Dire Straits bis hin zu Lady Gaga und zurück und allem, was dazwischen liegt. Wir haben die ikonischen Hallsounds, die du kennst und liebst, in einem kleinen Paket zusammengefasst, das einfach so wahnsinnig gut klingt, dass du es ausprobieren musst.

The original HALL OF FAME REVERB delivered some of the most-iconic reverb sounds of all time, but HALL OF FAME 2 REVERB extends that legacy of innovation dramatically. Essentially, HALL OF FAME 2 REVERB’s incredible MASH technology adds an expression pedal to a world-class reverb stompbox that not only responds to your touch and saves precious pedalboard space – but blends the celestial world of reverb with the ultimate in personal expression. Add a scintillating new Shimmer effect, and you've got a reverb pedal unlike any other – the awe-inspiring HALL OF FAME 2 REVERB!

The HALL OF FAME 2 REVERB features groundbreaking new technology that brings a wide range of creative expression to the party, controlled solely by how much pressure you apply to the depressed footswitch. Years in the making, and only available in select
TC ELECTRONIC products, this clever innovation elevates the common footswitch well above rather mundane duties, such as “On” and “Off”. More importantly – MASH elevates your performance to the next level.