Mike Borg

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Mike's HX Stomp XL Board

Heitor Rosa

Der NS-1X ist mit der fortschrittlichen BOSS MDP-Technologie ausgestattet und dämpft Geräusche auf intelligente Weise, ohne den natürlichen Klang und das Spielgefühl deiner Gitarre oder deines Basses zu beeinträchtigen. Der Reduction-Modus sorgt dafür, dass Ihr Rig in jedem Spiel-Setup leise bleibt, während der Gate-Modus eine ultraschnelle Performance bietet, die sicherstellt, dass präzise High-Gain-Riffs scharf und deutlich bleiben. Der vielseitige und einfach zu bedienende NS-1X ist ein unverzichtbares Werkzeug zur Beseitigung von Rauschproblemen beim Üben, Spielen und Aufnehmen.

Powered by advanced BOSS MDP technology, the NS-1X intelligently silences noise without affecting the natural tone and playing feel of your guitar or bass. Reduction mode keeps your rig quiet in any general playing setup, while Gate mode provides ultra-fast performance to ensure that precision, high-gain riffs remain sharp and distinct. Versatile and easy to use, the NS-1X is an essential tool for defeating noise issues while practicing, performing, and recording.

BOSS

Product Page

Review by Rig-Talk

Review by Reddit /guitarpedals

Review by SonicScoop

Review by Audiofanzine

Manual

Demo by The Studio Rats

Official Product Video

Demo by Andertons Music Co

Demo by Scott Wharton's Guitarnivore

NS-1X Noise Suppressor Pedal

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

David Litaba

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

TC Electronic

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by TC Electronic 

Demo by Guitar World 

Polytune 3 Mini

Tester

Der EarthQuaker Devices Plumes basiert auf dem legendären grünen Overdrive Pedal, das seit Jahrzehnten als Industriestandard gilt. Im Zusammenspiel mit einem guten Röhrenverstärker erzeugt der Plumes eine warme, transparente Sättigung. EarthQuaker verzichtet auf den bewährten JRC4558 OpAmp und die BJT Buffer und ersetzt sie in der Schaltung durch Low Noise JFET OpAmps für einen präziseren Sound mit deutlich geringerem Grundrauschen. Mit 10 Megaohm Eingangsimpedanz bietet das Pedal einen wunderbar klaren, detaillierten Sound. Der Arbeitsbereich des Tone-Reglers wurde ebenfalls angepasst um mit einem satteren Low End ein breiteres Spektrum an möglichen Sounds zu bieten. 

Zusätzlich bietet der Plumes drei wählbare Clipping-Modi um den Sound des Pedals an möglichst viele Stilrichtungen und unterschiedlichstes Equipment anpassen zu können. Mode 1 bietet symmetrisches Clipping, basierend auf einem Paar LEDs. Das Setting bietet den sattesten Crunch und den klassischen Sound eines übersteuerten Röhrenverstärkers. Mode 2 ist ein Clean Boost ohne Soft Clipping, perfekt um den Clean Sound im Mix nach vorne zu bringen oder den Preamp eines Verstärkers in die Sättigung zu fahren. Mode 3 nutzt asymmetrisches Clipping mit Silizium Dioden und klingt am ehesten nach einem originalen Screamer. Im direkten Vergleich liefert das Setting aber mehr Output und klarere Clean Sounds.

Darüber hinaus verfügt der Plumes auch über EarthQuaker Devices 'Soft Touch' Flexi-Switch-Funktion, mit der du im Handumdrehen zwischen Momentary Modus und traditionellem Latching wählen kannst.

The EarthQuaker Devices Plumes is based on the legendary green overdrive pedal, which has been the industry standard for decades. In combination with a good tube amp, the Plumes creates a warm, transparent saturation. EarthQuaker Devices relinquishes the trusted JRC4558 OpAmp and BJT Buffers and replaces them with low noise JFET OpAmps for a more robust and precise signal with a significantly lower noise floor. With 10 megohms of input impedance, the pedal provides a stronger signal with more clarity and chime. EarthQuaker Devices adjusted the cutoff of the tone control to deliver a more useful range of travel with more booming bass on the low end without sacrificing the cutting midrange and bright top end.

In addition, the Plumes offers three selectable clipping modes to ensure that it will work with a wide variety of gear and playing styles. Mode 1 is symmetrical clipping based on a pair of LEDs. This is the crunchiest setting the Plumes has to offer. When played through a clean amp, it will deliver that classic crunchy valve amp tone. Mode 2 is a clean boost without soft clipping and with straight OpAmp drive, perfect for pushing your clean tone out in front or driving the preamp of an already overdriven amp into breakup saturation. Mode 3 is an asymmetrical silicon diode arrangement like an original screamer but with more output and clean clarity.

The Plumes features EarthQuaker Devices relay-based 'soft touch' Flexi-Switch Technology for both momentary and latching footswitch operation.

EarthQuaker Devices

Official Product Page

EarthQuaker Devices Plumes - Official Video Manual

EarthQuaker Devices Plumes - Official Bass Demo

EarthQuaker Devices Plumes - Official Synth Demo

EarthQuaker Devices Plumes - Official Guitar Demo

EarthQuaker Devices Plumes - Demo Video - Guitar Bonedo

EarthQuaker Devices Plumes - Demo / Review Video - Musiker TV

EarthQuaker Devices Plumes - Demo Video - Musiker TV

EarthQuaker Devices Plumes - Guitar, Synth, Bass Demo Video - ThePedalZone

EarthQuaker Devices Plumes - Tone Report Demo Video - Reverb

EarthQuaker Devices Plumes - Demo Video - Sweetwater

EarthQuaker Devices Plumes - Review by Gitarist [NL], [12-2020]

EarthQuaker Devices Plumes - Review by Muzikus [CZ], [12-2019]

EarthQuaker Devices Plumes - Review by Gitarre&Bass [DE], [11-2019]

EarthQuaker Devices Plumes - Review by GuitarWorld [EN], [11-2019]

EarthQuaker Devices Plumes - Review by PremierGuitar [EN], [10-2019]

EarthQuaker Devices Plumes - Review by GuitarPlayer [EN], [10-2019]

EarthQuaker Devices Plumes - Review by Bonedo [DE], [09-2019]

EarthQuaker Devices Plumes - Review by Amazona [DE], [09-2019]

Plumes Small Signal Shredder

PedalSafe Type B

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für Standard-Einzelpedale

Protective Cover & RockBoard Mounting Plate For Standard Single Pedals

Schutzabdeckung & universelle Montageplatte für Standard-Einzelpedale

Protective Cover & Universal Mounting Plate For Standard Single Pedals

Chad Penfold

Ampero Press ist ein kompaktes, passives Lautstärke-/Expression-2-in-1-Pedal, das nicht nur zur Steuerung von Multieffekten der Ampero-Serie, sondern auch zur Steuerung anderer Musikgeräte (mit externen EXP-Pedalanschlüssen) oder zur Verwendung als passives Lautstärkepedal entwickelt wurde. Ampero Press verfügt über die DNA der Hotone Ampero-Linie: klassische schwarz-goldene Kleidung mit einem hochwertigen strukturierten Finish. Es verfügt über ein solides Gehäuse aus Aluminiumlegierung und bietet ein reibungsloses und komfortables Benutzererlebnis.

Ampero Press is a compact, passive volume/expression 2 in 1 pedal designed not only for controlling Ampero series multi-effects, but also for controlling other musical devices (with external EXP pedal jacks) or being used as a passive volume pedal. Ampero Press boasts the DNA of the Hotone Ampero line: classic black and gold attire with a high-end textured finish. It has solid aluminum alloy casing, smooth and comfortable user experience.

HOTONE

Review by Pedal of the Day

Demo by  Aaron Sopungco

Ampero Press

Javier Murcia Dominguez

Soul Press II ist die nächste Generation der Hotone Press-Pedalreihe. Das neu gestaltete Upgrade basiert auf den beliebten Konzepten von Soul Press und Vow Press. Es integriert bis zu vier Funktionsmodi (Volume, Wah, Volume/Wah, Expression), was die Spielbarkeit auf ein neues Niveau hebt. Die Pedalstellungsanzeige zeigt die Pedalstellung in Echtzeit an. Die Auswahl des TONE-Modus und die Einstellung des Q-Werts stellen eine absolute Verbesserung von Klang und Funktionalität dar. Mehrere E/A-Optionen bieten einen vielfältigeren Zugang. Die neu gestaltete Größe des Pedals sorgt für Tragbarkeit und optimale Ergonomie. Soul Press II ist ein wirklich vielseitiges Wah-Pedal.   

Soul Press II is a next-gen product in the Hotone Press series pedal line. It's new-designed upgrade is based on the popular concepts of both the Soul Press and Vow Press. It integrates up to four function modes (volume, wah, volume/wah, expression), taking playability to new heights. The pedal position indicator shows the pedal position in real time. The TONE mode selection and Q value adjustment represent an absolute improvement in tone and functionality. Multiple I/O options provide more diverse access. The reimagined pedal size maintains portability while delivering an optimal ergonomic experience. Soul Press II is a truly versatile wah pedal.   

Review by reddit /guitarpedals

Review by headliner

Review by The Gear Page

Review by Bass Musician Mag

Demo by The Pedal Guy

Demo by Nobes Music

Demo by intheblues

Demo by Pedal of the Day

Soul Press II

Jeremie volant

Geballte MIDI-Kontrolle im Handtaschenformat - von Pedalboard bis DAW

Morningstar Engineering

Demo by Mark Johnston 

Demo by Morningstar Engineering 

Arthur TARPINIAN

Introducing the Unobtanium, a rare sonic element born out of legendary tones!

A mythical overdrive meets the tone and feel of two iconic amplifiers. We have accurately recreated the circuit of the high headroom overdrive with the magic blend of clean and overdriven tones and added extra features for versatility. The amp-in-a-box section uses an all-analog circuit to capture the essence of two legendary D-style tube amplifiers. From tube-like compressed fat clean to sweet singing overdrive with blooming harmonic overtones. Combine both sides for near infinite smooth sustain and enter sonic bliss while a passive series effects loop gives you the option to connect your beloved pedals between the overdrive and amp section, building your ideal rig.

Crazy Tube Circuits

Demo by EytschPi42

Review by Guitar.com

Review by Guitar World

Review by bonedo

Unobtanium

Oscar Kezirian

In Zusammenarbeit mit Analog Man selbst entwickelt, ist Brothers AM eine Hommage an den legendären King of Tone Overdrive.

Er basiert auf der begehrten Schaltung, bietet dir erweiterte Kontrolle und ein paar spannende Extras – ohne das zu verändern, was ihn ursprünglich so besonders gemacht hat.

Ein Schub sonniger Sättigung, der einfach immer genau richtig klingt.

Made in collaboration with Analog Man himself, Brothers AM is a tribute to the legendary King of Tone overdrive.

It builds on that iconic circuit, adding deeper control and a few tasty extras—without losing the magic that made it a classic.

Think: a stack of sunny saturation that always lands in the sweet spot.

Chase Bliss

Demo by Sean Pierce Johnson

Review by Guitar Bomb

Review by Gear News

Brothers AM

ch ray

Der Verstärker- und Effektprozessor HX Stomp™ XL bietet HX®-Modeling in einem leistungsfähigen Pedal mit acht kapazitiven Fußtastern. Der gleiche SHARC®-DSP-Chip wie im Helix® ermöglicht den gleichzeitigen Betrieb von bis zu acht Blöcken, die sich mit den Fußschaltern auf verschiedenste Weise aufrufen und steuern lassen.

The HX Stomp™ XL amp and effects processor delivers HX® modeling in a performance-ready pedal with eight capacitive-touch footswitches. The same SHARC® DSP chip found in Helix® enables it to run up to eight processing blocks simultaneously, and the footswitches let you access and control those blocks in powerful ways.

LINE 6

Demo by  Ryan Snyder

Demo by  Musikhaus Korn

Demo by Bernd Kiltz - Gitarrenvideos

Review by Musicradar

Review by Guitarworld

Review by Bonedo

HX Stomp XL

Für 9-14 FX-Pedale, 2 MOD-Slots - **722 x 236 mm / 28.43" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 14 FX pedals, 2 MOD slots - **722 x 236 mm / 28.43" x 9.29"** - available with Gig Bag or Flight Case

Domingo  Buleto Delgado

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

My Board

Es gibt viele Pedale, die einen Röhren-Breakup simulieren. Wir haben uns entschieden, keinen Röhren-Distortion nachzubauen, sondern echte Vakuum-Röhren einzusetzen. Das Herz des kompakten MTG Pedals besteht aus einer NOS (New Old Stock) US-made 6205 Vorstufenröhre. Ein 3-Band-EQ mit Tight-Schalter sowie zuschaltbarem Boost und eigenen Level- und Boost-Reglern ermöglicht kreatives Klangdesign mit dem Original-Röhrensound.

Fender has expanded their line of ruggedly built pedals considerably over the past two years. New to their line of tube-based pedals, the MTG: LA Tube Distortion joins their two other tube-based pedals (see our review of the Tube Tremolo). And while overdrive pedals may seem to be a dime a dozen, this particular pedal was designed in collaboration with famed amp builder, Bruce Egnater (If you don’t know who Bruce Egnater is, visit the Egnater Amps website and read up).

Fender

Review by musicplayer

Review by musicradar 

Demo by Brett Kingman 

Demo by Fender 

MTG Tube Distortion

We have had many requests for a more straight sounding delay pedal that is clearer and more true to the incoming guitar signal. By using new hardware, we not only created a very studio-like sounding delay, but we were able to increase the delay time to a maximum of 3 seconds. It sounds more modern and it doesn´t distort or warble – it merely sends out what you put in, only a little later and in a very pleasing way.
Just like all our other delays, the dry signal is kept analog, so there is no latency or coloring from the converters to the dry signal.

T-Rex

Review by Pedal of the day

Review by Trevor Curwen

Replay Box

QuickMount Type UH

Universal-Pedal-Montageplatte für horizontale Pedale

Universal Pedal Mounting Plate For Horizontal Pedals

Franko Teston

TONEX ONE integriert die revolutionäre AI Machine Modeling-Technologie in Pedalboards jeder Größe, sodass Sie auf mehr Arten als je zuvor mit den gefragtesten Sounds der Welt spielen können. Es macht buchstäblich unbegrenzte Töne für jedermann zugänglich.

Das ultrakompakte und leistungsstarke TONEX ONE speichert bis zu 20 hyperrealistisch modellierte Verstärker, Boxen und Pedale aus einer praktisch unbegrenzten Quelle, sodass Sie es überall in Ihrem Rig hinzufügen können. Mit der mitgelieferten TONEX-Software können Sie sogar Modelle Ihrer eigenen erfassten Ausrüstung hochladen. Platzieren Sie mühelos mehrere Einheiten auf Ihrem Board für wirklich unbegrenzte Klangmöglichkeiten.

TONEX ONE puts IK’s revolutionary AI Machine Modeling technology on any size pedalboard, enabling you to perform with the world’s most sought-after tones in more ways than ever before. It truly makes unlimited tone accessible to all.

Ultra-compact and powerful, TONEX ONE stores up to 20 hyper-realistic modeled amps, cabs and stomps from a nearly infinite supply, so you can add it anywhere in your rig. You can even load models of your own gear captured with the included TONEX software. Effortlessly fit multiple units on your board for truly limitless tone possibilities.

IK Multimedia

Review by musicradar

Review by delamar

Demo by ikmultimedia

ToneX One

Kick your playing into high gear with SPARK MINI BOOSTER, a stompbox-wonder for the initiated that features a completely clean boost with some serious tone enhancement under the hood once you really start cranking things.

With a full 20 dB of boost, SPARK MINI BOOSTER is a great clean booster. But that’s not all it does – keep turning that knob and it’ll start working its magic driving gear into peak performance! No matter what your style or set-up, this musical miracle will maximize your potential – but let your core tone shine through completely unaltered.

PrimeTime is a radical new feature that is exciting guitarists around the globe. Put simply, SPARK MINI BOOSTER instantly understands whether you want the pedal to be on permanently when you hit the footswitch, or just when you hold the footswitch down. Which totally rocks for both ‘always-on’ and ‘emphasizing passages’ situations.

By adding a discrete, fully analog circuit, SPARK MINI BOOSTER adds a purely magical sense of life and excitement to your gear and tone. Each part of the circuit is carefully selected, from transistor to capacitor and from resistor to diode. What does that mean? Sweet, pure tone in all of its glory in an unparalleled clarity with zero coloration. Whether you want to make things sing or roar, this circuit ensures to maximize your tone.

Review by Daniel Rettberg

Demo by Reverb

Spark Mini Booster

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

Hughes & Kettner

Tube Factor

TAI  TONG YEE

Ampero Control ist ein kompakter, robuster, voll programmierbarer Bluetooth-MIDI-Controller, der Musikern eine flexible MIDI-basierte Steuerung über MIDI-Port, USB-Buchse und Bluetooth ermöglicht. Es verfügt über 4 Fußschalter, mit jedem Fußschalter kannst du bis zu 16 verschiedene MIDI-Befehle durch verschiedene Aktionen senden. Du kannst auch Expression-Pedale oder weitere Fußschalter an den Ampero Control anschließen, je nach deinen Bedürfnissen. Darüber hinaus kannst du mit einer speziellen intelligenten mobilen App jedes Detail des Ampero Controls einstellen, ohne dass es zu Verwirrungen kommt.

Ampero Control is a compact, sturdy, fully programmable Bluetooth MIDI controller, that gives musicians flexible MIDI-based control via MIDI port, USB jack and Bluetooth. It features 4 footswitches, with each footswitch, you can send up to 16 different MIDI messages by different actions. You can also attach expression pedals or more footswitches to your Ampero Control depending on your needs. Furthermore, a dedicated smart mobile app lets you set every detail of your Ampero Control without any confusion.

Demo by Nik Dobbin

Ampero Control

Conventional external expression pedals often control only parameters of an effects unit, requiring the use of switches on the effects unit to change its status. 
Ampero II Press solves this problem perfectly with its built-in single footswitch. And the optimized footswitch structure   provides the excellent tactile feedback. 

Designed with a passive circuit, it's reliable and convenient.
Whether on stage or in the studio, Ampero II Press is ready to add extraordinary expressiveness to your performance.

Quick Start Guide

Demo by Mad Steex

Ampero II Press

Das TC Electronic Plethora X5 der dänischen Effektschmiede vereint die Vorzüge der beliebten hauseigenen Toneprint-Pedale mit der Praktikabilität einer vollen Multieffekteinheit. Das Pedalboard kommt dabei in sehr handlichen Maßen, bietet fünf zuweisbare Slots für die TC-Effektpedale mit bis zu 75 Toneprints und kann sogar durch die Vier-Kabel-Methode mit einem Amp eingesetzt werden.

The TC Electronic Plethora X5 from the Danish effects manufacturer combines the advantages of the popular in-house Toneprint pedals with the practicality of a full multi-effects unit. The pedalboard comes in very handy dimensions, offers five assignable slots for the TC effect pedals with up to 75 Toneprints and can even be used with an amp through the four-cable method.

Demo by SweetWater

Demo by Riffs, Beard & Gear 

PLETHORA X5

Offering a universe of rich, analog-inspired polyphonic tones in a small footprint, the SY-200 makes it simple to weave BOSS’s expressive guitar and bass synth technology into all of your musical journeys. Building on the fun, instant-gratification experience of the acclaimed SY-1, this blue inspiration machine features an expanded sound set, more tone-shaping possibilities, and 128 memories for storing your sonic creations. Two onboard footswitches provide deep real-time performance control, and you can take things even further with external footswitches, an expression pedal, and MIDI.

Demo by  Six-String Samurai

Review by Sound on Sound

SY-200 Synthesizer

Harley Benton

PowerPlant ISO-2AC Pro Modular

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

George Zafeiriou

New Pedal Board

OC-3 Super Octave

can also be controlled.
MIDI COMMANDER arranges normal control functions based on different HOSTs (software or gear who receive the
commands) and pre-defined as HOST modes. In addition, it also has two customizable HOST that it is used to arrange
self-defined MIDI control functions mapping with the foot switches.
Also it has two expression pedal inputs, which control the Wah and the Volume to assist the flexibility and creativity of playing. It can be powered by 2x AAA
batteries or USB, and it is also has the automatic charging function for chargeable batteries. (Require special activation to
avoid accidental charging or high current). This pedal design achieves minimum size and weight while keeping its
usability. It can be used along with other audio interface or hardware devices for live show and recording.

Melo Audio

Demo by Trey Xavier

Official Website

Review by The Tone King

Review by VGuitar Forums

Review by GEAR GODS

Midi Commander

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There’s even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Demo by Rabea Massaad

Review by guitar pedal X

OD-200 Hybrid Drive

David Graves

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Origin Effects

Demo by  BassTheWorld.com

Cali76 Bass Compressor (Classic)

Soul Press II von HOTONE