Ej Santos

Pro Jet

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Ej's Church Board

HT-Club 40

ch ray

Designed for use anywhere you need a dual foot switch, with two foot switches and a 1/4" stereo jack.
Compact size with full metal shell, lightweight and durable.
Please note that the channels cannot be changed.

Mosky

Product Page

Demo by Djonathan Nagtalon

Demo by NOHC JAMS

Dual Foot Switch

remi clairet

pandaMidi

panda midi beam wireless

Ivan Vukosav

Apple

iPad Mini 5th Generation

Heitor Rosa

An ultra-powerful digital amp, cab, and effects processor that fits in the palm of your hand
Nano Cortex gives you the power of a full guitar or bass rig in a compact, ultra-portable pedal. With studio-quality sound, a comprehensive signal chain, and the revolutionary Neural Capture technology, it meets all your tone-shaping needs whether on stage, in the studio, or at home.

Neural DSP

Review by gearnews.de

Review by Guitar.com

Review by Sound on Sound

Review by bonedo

Manual Page

Official Product Video

Demo by Charlie Robbins

Nano Cortex

Dominic Boldeman

Wir stellen vor: G3S Atom, ein Atom mit Bildschirmen neben jedem Fußschalter … endlich!

Seit der Einführung unseres G2 Pedalboard Switcher im Jahr 2013 haben wir nie aufgehört, davon zu träumen, was als Nächstes kommen würde. 2020 war das Jahr der Weiterentwicklung unseres G-Switching-Systems – das mächtige G3 und G3 Atom mit ihrer beispiellosen Signalpfadflexibilität, MIDI-Steuerung und intuitiven Programmierung.

Bis heute setzt die G3-Reihe den Standard für die professionelle Effektpedalsteuerung, sodass Sie sich auf das Wesentliche konzentrieren können – das Spielen.

Introducing G3S Atom, its Atom built with screens next to each footswitch… finally!

Since the launch of our G2 Pedalboard Switcher in 2013 we’ve never stopped dreaming about what would be next. 2020 saw the evolution of our G switching system - the mighty G3 and G3 Atom with their unparalleled signal path flexibility, MIDI control, and intuitive programming. 

To this day the G3 range sets the standard for professional effects pedalboard control, allowing you to concentrate on the important thing - playing. 

GigRig

Review by Mixdown Mag

Review by Music Radar

Manual

Demo by Omilion Audio

G3S Atom

One of MI’s most popular pedals, now even better! We’ve re-designed the original and added new features to make the Super Blues Pro so much more than a blues overdrive! Added BODY, TRIM and CLIPPING STRUCTURE controls makes this one of the most flexible low to mid-gain overdrives on the market.

The Blues Pro’s classic three-knob design is now bigger and better! All of the variables of this modified TS design are now on the face of the pedal for the ultimate in low/mid-gain tone-shaping. A plethora of overdrive tones await: Be it a low-gain boost, a harmonic blues solo tone or super-compressed fuzz – all can be dialled and switched in with the new expanded feature set. The classic compressed, mid-hump overdrive of the original is still there but is now surrounded by many more options for you to find your custom overdrive tone!

Mi Audio

Demo by  roknfnrol

Demo by Gearfacts

Review by reddit /guitarpedals

Review by audiofanzine

Review by The Gear Page

Review by guitartest.de

Blues Pro

Discover the ultimate blend of vintage charm and modern innovation with the new Antique Classic Drive.

Redesigned under the Cornerstone Phase 3 style, this pedal draws open inspiration from the iconic vintage Italian Vespa.

Offering not just an innovative neo-vintage tool for your music but a piece of art for your pedalboard.

Discover the renewed versatility and style of the Antique Classic Drive.

Cornerstone Music Gear 

Review by delicious audio

Demo by Kris Barocsi

Antique V3

It is the perfect solution for connecting your guitar/pedalboard to your amplifier, especially when distance is an issue.  Using this system will allow you to have your pedalboard up to 90m (300ft) away from your amplifier without suffering from cable loss that is typical with standard unbalanced ¼” cable at 6m (20ft).

The ‘TA LINK’ system comprises of a single stereo Transmitter (TX) and two mono Receivers (RX).  The Transmitter converts an unbalanced signal via ¼” to a balanced signal via XLR.  This balanced signal is then transmitted up to 90m (300ft) to the Receiver.  The Receiver converts the balanced signal via XLR back to an unbalanced signal via ¼”.  This unbalanced signal is now again suitable for standard audio amplifiers.

TA Solutions

Reverb

Stereo Link-TX

Elod Bajrami

Altoids

David Litaba

Das Original Crybaby Pedal, das viele zeitlose Rocksounds erzeugte und unter anderem von Größen wie Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour benutzt wurde.

When people talk about wah pedals, they're talking about the Crybaby. This is the original—the one that created some of the most timeless sounds in rock. Relied on by Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour, and many other greats Features: Heavy die cast construction for years of reliability, 100K ohm Hot Potz potentiometer that allows for that quick, abrupt wah sound. Powered by the Dunlop ECB-003 AC Adapter and/or 9 volt battery.

Dunlop

Official Product Page

Guitar World Demo

Review by bonedo 

Demo by PMTVUK

Demo by SweetWater

GCB95 Cry Baby Standard Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Eric kloehn

Bringing together the very best of classic guitar compression and time-honored recording techniques. The Barber Tone Press is a revolutionary performance compression pedal that has no rival...

Parallel compression is the solution. a Barber innovation that is more natural than dealing with attack, ratio and release knobs. Barber developed a unique continuous “blend control” circuit, and combined it with a discrete “Class A” FET mixer circuit to allow you to continuously blend the natural signal of your guitar with a “phase-corrected” classic compression circuit. The result? What guitar players have always wanted, unaltered attack with supernatural sustain and resonance. No studio engineering degree required.

Barber Electronics

Demo by Aftermath Studios

Demo by Prymaxe

Review by OVNI LABS

TONE PRESS COMPACT

Adrian Zumbrunn

Das Ernie Ball VP Jr 250k kommt mit den gleichen großartigen Eigenschaften wie unser original Lautstärkepedal, allerdings um 22% kleiner. Das im kompakten, robusten und nahezu unzerstörbaren Aluminiumgehäuse untergebrachte Pedal ist perfekt auf passive Audiosignale abgestimmt. Direkt hinter der Eingangsbuchse unterhalb der Wippe wartet ein Micro-Schalter, der die Wahl zwischen zwei voreingestellten Lautstärke-Raten bietet.

The Ernie Ball VP Jr 250k provides all the same great features as our original volume pedal while reducing your footprint by 22%. The VP 250k Jr is perfectly voiced for passive signals and features a compact, rugged design consisting of aircraft grade aluminum housing that is virtually indestructible. Directly behind the input jack under the footplate is a micro taper switch which provides the user two distinct volume swell rates.

Ernie Ball

Demo by Austin Lindsay

Demo by Long & McQuade 

Review by Talk Bass.com

Review by Ernie Ball Forum

Review by Guitar Space

Volume Pedal Jr. 250K

Tester

Controlling your pedals is about to get a whole lot easier!
Packed in this small footprint is a controller that can be completely customised to your liking and will let you control your entire pedal board from the one place. Not only can you control your devices via Midi, but also via the 4 TRS Jacks (most commonly used as tap tempo outputs).

Whether your pedal accepts a Normally Open tap signal, Normally Closed tap signal, TRS tap configuration, MIDI Clock, or needs a custom Midi Message sent every quarter note, the Quartz can sync them to a specified BPM.

Selah Effects

Demo by stoopalini

Demo by The Sound Parcel

Review by The Sound Parcel

Quartz v3

Neue Dimensionen in Raum und Zeit – Das RV-500 ist der leistungsstärkste und vielseitigste BOSS-Hallprozessor aller Zeiten. Das flexible Effektgerät basiert auf einer 32 Bit AD/DA-Wandlung mit 32 Bit Fließkommaberechnung und 96 kHz Samplingrate und bietet höchste Programmierbarkeit für die internen, professionellen Hallprogramme in Studioqualität.

Today’s stompbox market already caters for more adventurous reverb tastes with devices such as Eventide’s H9 and Black Hole, Strymon’s Big Sky, the Source Audio Ventris and the more affordable (but mono‑only) Electro‑Harmonix Oceans 11 — and that’s just scratching the surface! Boss might not be the first name to spring to mind if you were seeking a really esoteric reverb, but the new Boss RV‑500 not only bears comparison with its aforementioned rivals in terms of sound quality and effect variety, but it also offers a number of useful functions that most of its rivals can’t.

BOSS

Review by Paul White, soundonsound.com

Review by Stephan Güte, amazona.de

Demo by Reverb 

Demo by Rabea Massaad 

RV-500 Reverb

Das Boss DD-500, ein High End Delay des japanischen Effektgeräte-Herstellers, kann mit 12 Delay-Programmen, 32 Bit/96 kHz Signalverarbeitung, bis zu 297 Speicherplätzen und einem Looper aufwarten und ist mit dieser Ausstattung naturgemäß in einer etwas höheren Preisklasse angesiedelt. Allein diese Eckdaten sind einigermaßen imposant, aber die Marke Boss und der Mutterkonzern Roland haben bereits in der Vergangenheit – zum Beispiel mit dem DD-20, dem Space Echo oder dem Tera Echo – bewiesen, dass man durchaus auch in unterschiedlichen Preiskategorien in der Lage ist, uns Gitarristen mit amtlichen Delay-Sounds zu versorgen.

The Boss DD-500 is one of the few Boss pedals which are, because of their size, less pedalboard friendly. Therefor, it offers up to 10 seconds maximum delay time, tap tempo and tape emulation.
Other features of the stereo pedal that allows to choose a true bypass or a buffered processing, are modulation, expression pedal and midi input.
Furthermore, you can lead different delays (modulation models) on several channels and run the pedal serial as well as parallel.
All things considered, the 9V pedal with integrated looper provides an extremely extensive menu including tone shaping options.
Nevertheless, the Boss DD-500 which is still produced today is not really legendary and its sound is quite sterile. This is why this digital delay is a 3 of 10 on my cult factor scale.

Review by Michael Astley-Brown, musicradar.com

Review by Thomas Dill, bonedo.de

Demo by ProGuitarShopDemos 

Demo by Leon Todd 

DD-500 Digital Delay

QuickMount Type J1

Pedal-Montageplatte für BOSS DD-500, MD-500, RC-500 & RV-500 / STRYMON BigSky, Mobius & TimeLine Pedale

Pedal Mounting Plate for BOSS DD-500, MD-500, RC-500 & RV-500 / STRYMON BigSky, Mobius & TimeLine pedals

NUX B-8 ist ein neu definiertes Drahtlossystem mit automatischer Einrichtung, störungsfreier 2,4-GHz-Rundfunkfrequenz und hochwertiger 24-Bit-48-kHz-Audioübertragung. Die Latenzzeit bei der Signalübertragung beträgt nur 2,5 ms bei bester Leistung. Die Betriebsreichweite beträgt bis zu 50 Meter (160 Fuß). 

Das drahtlose B-8-System eignet sich für alle Arten von E-Gitarren, E-Akustikgitarren, Bässe und verschiedene Instrumente mit elektronischen Tonabnehmern. Unabhängig davon, welches Instrument Sie spielen, können Sie die Bequemlichkeit mit B-8 Wireless genießen.

NUX B-8 is a redefined wireless system with automatic setup, 2.4 GHz interference-free broadcasting frequency, and 24-bit 48 kHz high-quality audio transmitting. The signal transmitting latency is as low as 2.5ms at the best performance. The operation range is up to 50 meters (160-feet). 

B-8 wireless system fits all types of electric guitar, electric-acoustic guitar, bass guitar, and various instruments with electronic pickups. No matter what instrument you play, you can enjoy the convenience with B-8 wireless.

Review by AMAZONA

Review by gearnews

Demo by Scott Uhl

Demo by Andrew Siemon

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Der EHX Nano POG kann gleichzeitig mehrere Oktaven aus deinem Eingangssignal erzeugen. Egal, ob du Einzelnoten, Arpeggios oder volle Akkorde spielst, der Nano POG wird jede Note oder jeden Akkord, den du spielst, präzise verfolgen.

Mit dem Nano POG kannst du dein trockenes Signal mit zwei verschiedenen Oktaven (eine oberhalb und eine unterhalb deiner ursprünglichen Note) mischen, um völlig neue, inspirierende Töne zu erzeugen.

Separate Lautstärkeregler für das trockene Signal, die Sub-Oktave und die Oktave nach oben sowie ein zusätzlicher Dry-Out und lautloses Umschalten per Fußschalter bieten die perfekte Formel für dieses kompakte Schmuckstück.

The EHX Nano POG can simultaneously generate multiple octaves from your input signal. Whether you play single notes, arpeggios, or full chords, the Nano POG will precisely track every note or chord that you play.

With the Nano POG, you can mix together your dry signal with two different octaves (one above and one below your original note) to create totally new, inspiring tones.

Separate level controls for dry, sub octave and octave up plus an extra Dry out and silent footswitching provide the perfect formula for this compact jewel.

Electro-Harmonix

Review by Premier Guitar

Nano POG

PedalSafe Type A2

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & RockBoard Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Schutzabdeckung & universelle Montageplatte ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & Universal Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Von außen betrachtet ist das Vertigo Tremolo aus der One Series ein recht geradliniges Pedal. Mit vier Reglern und drei, per Kippschalter anwählbaren Modi, bietet es bereits einiges an Kontrolle über den Sound des Tremolo Effekts. Und hier hat man bei weitem keine digitale Annäherung an Tremolo. Das Vertigo Tremolo klingt absolut wie ein echtes, tiefes und warmes Amp-Trem.
Verbindet man es via der gratis herunterladbaren Source Audio Neuro App mit dem Smartphone, eröffnet sich noch eine ganz neue Welt an Features wie progressiven Tremolo Patterns, zusätzlichen Modulationseffekten, parametrischen EQ Settings und vielem mehr. All diese Einstellungen können natürlich in den drei Kippschalter Positionen oder 128 MIDI Presets gespeichert und wieder abgerufen werden.

From the outside, the One Series Vertigo Tremolo is a very straight forward effects pedal. Four knobs, three presets accessible via toggle switch already give a lot of control over the sound of this tremolo device. And one doesn’t just get a digital approximation of a tremolo – the Vertigo Tremolo sounds absolutely like a real, deep, warm amp-trem.
Connected to a smart phone via the free Neuro App a new world of features like progressive tremolo patterns, additional modulation effects, parametric EQ settings and a lot more opens up to the user. All the settings of course can be saved to one of the three toggle positions or one of the 128 MIDI presets.

Source Audio

Source Audio SA 243 One Series Vertigo Tremolo - Demo by Elmer Ferrer

Source Audio SA 243 One Series Vertigo Tremolo - Try-Out by Steven Wilson

Source Audio SA 243 One Series Vertigo Tremolo - Demo Video by ProGuitarShopDemos

Source Audio SA 243 One Series Vertigo Tremolo - Review by Premier Guitar

Source Audio SA 243 One Series Vertigo Tremolo - Review by Tone Report

Source Audio SA 243 One Series Vertigo Tremolo - Review by Bonedo

Source Audio SA 243 One Series Vertigo Tremolo - Review by Gitarre&Bass DE

Source Audio SA 243 One Series Vertigo Tremolo - Review by Muzikus

Source Audio SA 243 One Series Vertigo Tremolo - One Series Review by Tone Report

Vertigo Tremolo

A warm silky boost with just the right amount of bite.
True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery.

Xotic

Review by Squid Guitar Inc.

Demo by Living Room GD

AC Booster

Walrus Audio

Canvas Power 5

Canvas Power 15

Für 15-25 FX-Pedale, 2 MOD-Slots - **820 x 424 mm / 32.28" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 2 MOD slots - **820 x 424 mm / 32.28" x 16.69"** - available with Gig Bag or Flight Case

Nathan Fuder

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Current Rig

Silvano Mercado

The NUX NDD-3 is a mini delay pedal that offers three unique delay types: Phi Digital Delay, Analog Delay, and Tape Echo. This pedal provides a wide range of delay options, allowing you to create a variety of sounds and effects.

Review by OSG

Demo by Sean Pierce Johnson

NDD-3 Edge Delay

Envelope controlled filter is an effect type that ventures beyond the mainstream yet is equally at home in a wide range of genres and equally effective on guitar, bass, keys, horns and more. Electro-Harmonix is a pioneer in this effect category and has been making envelope controlled filter pedals since the 1970s! The Nano Q-Tron springboards off that deep heritage.

Here’s how it works: The Nano Q-Tron responds to the user’s playing style and dynamics. The volume of the input signal it receives (also called the envelope) controls the cutoff or center frequency of a swept filter. This allows the Nano Q-Tron to create tone-altering effects ranging from subtle to dynamic, auto-wah to ultra-funky. It’s all about how you play and it’s super interactive

Nano Q-Tron

PedalSafe Type A1.1

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Tobias Elliott

The Canvas Power HP allows you power the thirstiest of modelers and pedals with a massive 3A (three Amp, or 3,000mA) output. The HP also has 3 isolated power outputs delivering up to 500mA of clean power at 9v. The 3A output can also switch between 9V and 12v for powering high-voltage pedals.

Review by musicradar

Demo by Mark Johnston

Canvas Power HP

Der Whitey Tighty Compressor ist JHS Pedals Version des klassischen Effekts, den man angeschaltet nicht hört, dafür aber schmerzlich vermisst, wenn er ausgeschaltet ist. Der Whitey Tighty ist so simpel gehalten, dass er deinem Setup und deinem Sound nie im Weg steht, durch das kompakte Mini-Format lässt er sich außerdem problemlos in jedes Pedalboard integrieren. Durch die Möglichkeit Kompression und Clean Signal stufenlos zu mischen hat jeder die Chance seinen perfekten Sound zu finden. Das Pedal arbeitet mit drei intuitiven Regelmöglichkeiten für Volume, Compression und Blend. Mit dem Volume-Regler lässt sich das Level auf Unity Gain einstellen oder leicht boosten, um den wahrgenommenen Verlust durch die Kompression auszugleichen. Der Compression-Regler regelt die Stärke der Kompression von einer subtilen 'Glättung' des Signals bis zu einem ansprechenden Squash, der sich perfekt für Country, Blues, Pop und Rock eignet. Über den Blend-Regler kann man das Verhältnis aus Clean Signal und komprimiertem Signal einzustellen. Auf diese Weise erhält man den natürlichen Klang des Instruments und erhält gleichzeitig eine Kompression in Studioqualität, die deinen Sound auf die nächste Stufe hebt.

The Whitey Tighty compressor is JHS Pedals take on the classic effect that no one may ever know is on, but when it's off you feel like your pants are down. The Whitey Tighty is as simple as it gets while never getting in the way. In a compact mini pedal, you'll save so much space on your pedal board that you'll be able to add to your wardrobe of effects with ease. And with the ability to blend in compression and clean signal, you'll be able to dial in the perfect sound that keeps everything in place. The Whitey Tighty is a FET compressor that has three simple controls: Volume, Compression, and Blend. The Volume control gives you the ability to set your volume at unity gain or slightly boosted to make up for any perceived loss from the compression. The Compression knob controls the amount of compression for everything from a subtle smoothing of your tone to a pleasing squash that’s perfect for country, blues, pop, and rock. Use the Blend knob to dial in the right amount of clean tone along with your compressed signal. This allows you to retain some of the natural feel of your clean tone while giving you the studio-quality compression that brings your sound to the next level. Tighten up your tone with the JHS Pedals Whitey Tighty!

JHS Whitey - Demo by Living Room

JHS Whitey Tighty - Review by Muzikus [CZ], [02-2020]

JHS Whitey Tighty - Review by Bonedo [DE], [11-2019]

Whitey Tighty

PedalSafe Type L

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & RockBoard Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Schutzabdeckung & universelle Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & Universal Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

JakobSlash

POLYTUNE 3 NOIR is destined to become the favorite mini pedal tuner for those going for a darker, more monochromatic manner of expression. Sometimes you want to keep things understated, classical. The midnight black powder coating compliments the stylistically oriented pedalboard – while keeping your signal crisp and your tone in tune.