andronik supersonik

Guitar ulala

Tester

The original DiscumBOBulator was often heralded as being the world’s best autowah/envelope filter pedal. So how do you improve a pedal that’s already flawlessly funky? Well, start out by making the filter-triggering even better and extend the dynamic range and feel. Now triple the headroom signal, so the pedal handles the red hot signals of active bass pickups and line level inputs like a piece of cake. Finally you add an independent 10dB boost that’ll make funky solos take flight instantly, and you have the new improved DiscumBOBulator V2.

Emma Electronic

Demo by Godlyke Inc.

Demo by  Maksim Sorokin

Product Page

Review by Pedal of the Day

Review by Talk Bass.com

Review by musicradar

Manual

DiscumBOBulator v2

Nicolas Wilfer

Die JHS Colour Box V2 ist ein Preamp / DI-Box nach dem Vorbild legendärer Neve Studio-Konsolen. Das Pedal wurde entwickelt um den authentischen Sound eines Instruments (oder Mikrofons) am Direct-In der Mischpulte zu reproduzieren, dabei bietet die Colour Box V2 alle Features der beliebten V1-Version und kommt zusätzlich mit einer Vielzahl an Verbesserungen und neuen Features, die das Pedal zu einem perfekten Allrounder und Always-On Pedal für alle denkbaren Instrumente und sogar für Sänger machen. Zu den neuen Features zählen eine erweiterte EQ-Sektion, ein Hi/Lo Schalter für massiven, cleanen Headroom und die Möglichkeit 48V Phantom-Power an Kondensator-Mikrofone weiterzugeben. Die Gain-Sektion (Rot) bietet Regelmöglichkeiten Master, Pre-Vol und Step. Master kontrolliert das Gesamt-Volume des Pedals, Pre-Vol arbeitet als Gain-Regler zwischen den beiden internen Gain Stages und bietet bei Bedarf eine Verzerrung, die von leichten Break-Up-Sounds bis zu Fuzz reicht. Der Step-Regler verändert das Gain der Preamp Stages in fünf Schritten. Der Hi/Lo Schalter verändert den cleanen Headroom des Pedals, der -20 dB Pad Schalter passt den Input bei Bedarf an Mikrofone mit einem hohen Ausgangspegel an. Die EQ-Sektion (Blau) wurden neben den bekannten Regler für Treble, Middle und Bass (+/- 17 dB Cut / Boost in jedem Band) um drei Shift-Regler erweitert, die den Frequenzbereich der einzelnen Regler anpassen. Die Hi-Pass-Sektion wird über den Kippschalter aktiviert. Um das Pedal so flexibel wie möglich zu halten steht ein kombinierter XLR/TRS Input zur Verfügung.

The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a "drive" or "gain" control, adding more grit, distortion, and even fuzz as you increase the gain. The Step control increases the gain of each preamp stage in five stages. Rotating the Step knob from left-to-right will increase the gain by the following: 1st is +18 dB, 2nd is +23 dB, 3rd is +28 dB, 4th is +33 dB, 5th is +39 dB. The JHS Colour Box V2 has a new Hi/Lo switch to control the amount of clean headroom you have available. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds. In addition to the Hi / Lo gain switch, there is a -20 dB pad switch on the right side of the Colour Box V2. This function only works when in XLR input mode and can help tame the volume for high output microphones. The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The center frequencies for the Shift knobs are Treble 10kHz, Middle 1kHz, and Bass 120Hz, while the Treble, Middle, and Bass knobs boost or cut with +/- 17 dB of control. If you want to boost high-mid frequencies, turn the Mid Shift knob to 3 o'clock or above and increase the Middle knob above 12 o'clock. If you want to cut upper treble frequencies, turn the Treble Shift knob to 3 o'clock or above and set the Treble knob below 12 o'clock. The Shift knobs give you precision control over the EQ for anything you put through the Colour Box V2. The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. Just flip it up to engage the Hi-Pass knob, which spans from 60Hz to 800Hz with a 6dB per octave slope. The Colour Box V2 has a combination XLR and 1/4" input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR.

Official Product Page

JHS Colour Box: A 1073 You Can Take Anywhere - JHS Pedals

Colour Box V2 10 Year Anniversary

Effectrode

Demo by Joe Perkins

Demo by Mike Hermans

Review by Anatomy of Guitar Tone

Mercury Tube Fuzz

Ruben Shannon

The Effectrode® ‘LA-1A’ Leveling Amplifier is a high-end, studio-grade vacuum tube compressor in a pedal. Whisper-quiet operation and a wide, wide dynamic range make this tone-tool an unparalleled tone enhancer on stage and in the studio—its natural warmth and clarity are unmatched.

Review by CompressorPedalReviews

Demo by Electric Mojo Guitars

Review by loopersparadise

LA1A Levelling Amplifier

The Fire Bottle™ is an all-tube booster specially designed to enhance the tone of single coil pickups. With up to 30dB of gain on tap, this powerful boost pedal can push the input stage of a tube amp into beautiful breakup and rich overdrive, creating glassy, bolder, larger-than-life Stevie Ray Vaughan Strat® guitar sounds.

Review by Musiker-Board

Demo by gilmourish

Fire Bottle

The Delta-Trem™ authentically recreates the alluring, hypnotic tone and feel of vintage guitar amp tremolo in S-T-E-R-E-O! This is accomplished using vacuum tubes and an archaic, long forgotten electronic component known as a ‘Raysistor’, essentially a tiny filament lamp and photocell housed together in a small metal can. The combination of Raysistor and all-tube circuitry tube creates an exceptionally smooth, rich and musical tremolo effect that blends well with clean and overdriven guitar sounds. The true stereo signal path allows the Delta-Trem to operate as a mono tremolo with a single guitar amp or into two amps, where the sound ping-pongs between them creating a huge, 3-D, spacious tone.

Demo by DMTR Pedal Shop

Delta-Trem

The Blue Bottle™ Inductorized Booster pedal has been custom designed for blues/rock guitarist John Verity to enable him to achieve a fatter, more bluesy B.B. King ‘335’ tones from his Strat-type guitars. It’s the perfect vintage mid-boost—never too aggressive or over-the-top—for low output single coil pickups.

Review by Guitar World

Demo by John Verity

Official Product Video

Blue Bottle

The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making
Tape delays.
it is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.

T-Rex

Demo by Martin Klaja's Guitarchannel

Demo by Duskmos

Demo by T-Rex Effects

Review by The Gear Page

Review by GEOFF KING, mixdownmag.com.au

Replicator D'LUXE

Der Heilige Gral unter den Gitarrenhall-Effekten, der Federhall im Fender®-Stil, wurde endlich mit modernen Funktionen neu aufgelegt!
Teste ihn und entdecke, warum die meisten Surf-Gitarristen und die wirklich Hallsüchtigen auf SurfyBear setzen.

The Holy Grail of guitar reverb effects, the Fender®-style spring reverb, has been finally revisited with modern features!
Try it and discover why most surf guitarists and the truly reverb addicted are turning to SurfyBear.

Surfy Industries

Demo by R.J. Ronquillo

Review by TapeOp

Review by bonedo

Surfybear Metal Reverb

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

BOSS

TU-3W Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Für 10-20 FX-Pedale, 2 MOD-Slots - **828 x 330 mm / 32.60" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 2 MOD slots - **828 x 330 mm / 32.60" x 12.99"** - available with Gig Bag or Flight Case

Der RockBoard Pedalboard Drawer ist eine simple aber extrem effiziente Lösung zum Organisieren und Verstauen von optionalem Zubehör in einem RockBoard Pedalboard. Der Pedalboard Drawer wurde entwickelt, um Zubehör wie Kabel, Plektren, Wireless Systeme und vieles mehr im MOD Slot des Pedalboards aufzubewahren. Durch den zentralen Zugang auf der Front des Pedalboards bietet der Drawer einen sichereren, sauberen und einfach zugänglichen Platz zur Aufbewahrung direkt am Setup. Durch die intelligente Arretierung der rotierenden Schublade ist eine zusätzliche Sicherung nicht notwendig.

- rotierende Schublade für RockBoard Pedalboards
- intelligenter Drehmechanismus mit sicherer Arretierung
- für Zubehör, Kabel, Wireless Systeme, Plektren, etc.
- passt in die MOD-Slot Aussparung von RockBoard Pedalboards (außer RockBoard DUO 2.0, 2.1, und 2.2)
- Material: Verstärktes Polyamid
- inkl. Montagematerial und Werkzeug
- Maße (B x T x H): 175 x 84,5 x 47 mm
- Gewicht: 150 g
- schwarz
- Hinweis: Nicht kompatibel mit den 19" Rack Panel Single oder Double (1U) - Rack Mount for RockBoard MOD

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.

- rotating mounting drawer for RockBoard pedalboards
- intelligent swivel locking mechanism
- for accessories, cables, wireless systems, etc.
- fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3)
- material: reinforced polyamide
- incl. all mounting screws, counter nuts, and tools
- dimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"
- weight: 150 g / 0.33 lbs
- black
- Note: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MOD

Rotierende Schublade für RockBoard Pedalboards

Rotating Drawer for RockBoard Pedalboards

Die RockBoard® MOD 5 Cab SIM + DI Patchbay bietet wählbare, IR-basierte Stereo-Lautsprecher Simulation, eine aktive DI-Box, sowie eine einfache Lösung, um alle Verbindungen zu und von deinem Effekt Setup zu organisieren. Egal, ob du ein RockBoard® oder ein anderes Pedalboard einer anderen Marke verwendest - die MOD 5 eröffnet völlig neue Möglichkeiten. Mit der Speaker-Cab-Simulation und DI kannst du direkt loslegen und hast DEINEN Sound parat, unabhängig davon, welche Backline an der jeweiligen Venue zur Verfügung steht. Du möchtest deine persönliche Lieblings-Cabinet benutzen? Kein Problem, lade eine Impulse Response des Sounds in die MOD 5 und du hast sie überall dabei. Der Patchbay-Teil dient dazu, Verbindungen von unterhalb deines Pedalboards nach vorne zu leiten, um dir einen zentralen Zugangspunkt zu deinem Setup zu geben und deinen Kabelsalat aufzuräumen. Für geräuschloses Üben auf der Straße bietet der MOD 5 auch einen Kopfhörerverstärker mit einstellbarer Ausgangslautstärke.
- Cabinet Simulation & DI Patchbay
- IR basierte Lautsprecher Simulation
- 6 integrierte IRs wählbar
- Unterstützung von zusätzlichen Custom IRs (max. 1024 pts.)
- integrierte aktive DI Box
- Kopfhöhrer Verstärker
- passend für MOD Slots in RockBoard® Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- wählbarer MONO / STEREO Input
- wählbarer UN- / BALANCED Output
- Ground Lift Schalter
- Regler für Phones Volume
- 3 x 6,3 mm TRS Thru
- XLR DI Out
- 6.3 mm Parallel TRS Output
- 3.5 mm Stereo Kopfhöhrer Ausgang mit einstellbarer Lautstärke
- micro USB Anschluss für Firmware Updates und zum Hochladen von Custom IRs
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Stromaufnahme 300 mA
- Batteriebetrieb nicht unterstützt
- Abmessungen mit Frontplatte (B x T x H) 175 x 85 x 47 mm 
- Abmessungen ohne Frontplatte (B x T x H) 160 x 85 x 33 mm
- Gewicht 470 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.
- cabinet simulation & DI patchbay
- IR-based speaker cabinet simulation
- 6 integrated IRs selectable
- support of additional Custom IRs (max. 1024 pts.)
- integrated active DI box
- headphone amplifier
- fits MOD slots in RockBoard® pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- selectable MONO / STEREO input
- selectable UN / BALANCED output
- ground lift switch
- control for Phones Volume
- 3 x 6.3 mm / ¼" TRS thru
- XLR DI Out
- 6.3 mm / ¼" Parallel TRS output
- 3.5 mm / 1/8" stereo headphone output with adjustable volume
- micro USB connection for firmware updates and loading custom IRs
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- current draw 300 mA
- battery operation not supported
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 470 g / 1.04 lbs.
- incl. mounting screws, counter nuts, and TX wrench

Cab SIM + DI Patchbay

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Die RockBoard® PowerMODs sind speziell entwickelte Class D Transistorverstärker mit denen Lautsprecherboxen direkt und ohne zusätzlichen Verstärker vom Pedalboard angesteuert werden können. Die PowerMODs bieten einen 3-Band EQ, eine schaltbare Cabinet Simulation für Fullrange Lautsprecher sowie eine Mute Funktion. Die PowerMODs können in den MOD Slots in allen RockBoard® Pedalboards (mit Ausnahme von DUO 2.0, 2.1 und 2.2) oder auf den Pedalboards von anderen Herstellern installiert und so Platz sparend in jedes denkbare System integriert werden.


- kompakter Verstärker für Pedalboards
- kann direkt auf allen RockBoard Pedalboards installiert werden, die mit einem MOD Slot ausgestattet sind, sowie auf Pedalboards von Drittanbietern
- Class D Transistorschaltung
- Leistung (@1% THD): 118 W an 4 Ohm / 70 W an 8 Ohm
- 3-Band EQ
- frontseitige Regler für Volume, Low, Mid, High
- frontseitiger Cab-Sim Schalter
- frontseitiger Mute Schalter
- frontseitiger 6,35 mm Lautsprecherausgang
- frontseitiger 3,5 mm Kopfhörerausgang
- frontseitiger 3.5 mm AUX IN Eingang für externe Audiosignale
- frontseitiger symmetrischer XLR DI Ausgang
- rückseitiger Anschluss für beiliegendes Netzteil
- rückseitiger Instrumenteneingang
- inklusive 220 - 240 VAC Netzteil, Ausgang 36 VDC, 4,16 A
- Abmessungen (L x B x H) 175 x 116 x 47 mm
- Gewicht 1,2 kg (einschließlich Netzteil)

The RockBoard® PowerMODs are specially designed Class D transistor amplifiers that can drive speaker cabinets directly from your pedalboard without an additional amplifier. The PowerMODs feature a 3-band EQ, switchable cabinet simulation for full-range speakers, and a mute function. The PowerMODs can be mounted directly into the MOD slot (available on all RockBoard® pedalboards except the DUO series) or onto pedalboards from other manufacturers, allowing for space-saving integration into any system.

- compact amplifier for pedalboards
- can be directly mounted on into all RockBoard pedalboards equipped with MOD slots or on third-party pedalboards
- solid-state design, class D amplifier circuitry
- power (@1% THD): 118 W at 4 Ohm / 70 W at 8 Ohm
- 3-band EQ
- front panel controls for Volume, Low, Mid, High
- front-mounted Cab-Sim switch
- front-mounted Mute switch
- front-mounted 6.35 mm (1/4") speaker output
- front-mounted 3.5 mm (1/8") headphone output
- front-mounted 3.5 mm (1/8") AUX IN input for external audio signals
- front-mounted balanced XLR DI output
- rear-mounted connection for included power supply adapter
- rear-mounted instrument input
- including 220 - 240 VAC power adapter, output 36 VDC, 4.16 A
- dimensions (L x W x H) 175 x 116 x 47 mm / 6.88" x 4.56" x 1.85"
- weight 1.2 kg / 2.65 lbs (including power supply)

Kompakter 150W Pedalboard Verstärker

Compact 150W Pedalboard Power Amp

Guitar ulalala

Scott Machalk

From recalling presets to tapping in tempos, MiniSwitch adds another layer of functionality to your Strymon pedals at the press of a button. 

Strymon

Demo by Sunday Tone 

Quick Start Guide

MiniSwitch

Dave Snippe

The Voltage Unit Meter Pedal (“VUMP”) is a guitar pedal-style level indication meter. This unit reads out signal level in the
traditional “Voltage Unit” (VU) scale, which is similar to a decibel (dB) scale, but pegged to a reference value of 0
VU=1.23VRMS. Since sound levels span many decades of pressure intensity, it is convenient to express the level in the
logarithmic dB scale. An increase of 6 dB sounds about twice as loud as the reference sound level.
The intended use for this device is to be the last “pedal” in a chain of pedals connected to an electronic instrument such
as an electric guitar or bass guitar, or microphone. It provides a convenient, local measure of your signal level just before
going to the amp or a sound board. You can also precisely equalize the volume settings of your pedals using this device. 

JoyeMusic

Analog-VUMP

Cited as a major influence by wah masters such as Hendrix, Clapton, and Vaughn, Buddy Guy helped establish the effect as part of the blues vocabulary. To honor his contributions we have created the Buddy Guy Cry Baby Wah, featuring the Fasel Inductor for a sweet and singing top end, and two distinct user selectable wah voices—choose "DEEP" for a big and throaty growl, or "BG" for Buddy's own warm and bell-like wah tone. Convenient side-mounted LEDs indicate which mode you are in, while a separate LED indicates effect on/off. Let your guitar sing the blues in style with the Buddy-approved polka dot graphics and custom signature tread.

Dunlop

Review by Simon Bradley, musicradar.com

Demo by Guitar World

BG95 Buddy Guy Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

The real McCoy! The SR-71 Blackbird™ ‘Tube Tone Engine’ is a genuine all-tube preamp in a compact pedal. Designed for great versatility, the  SR-71 adds additional clean/drive/distortion channels to vintage/boutique guitar amps or works as a professional stand-alone direct recording tube preamplifier. The clean channel possesses a beautifully pure, ‘glassy’ character and audio circuitry within the drive channel is tuned to generate a rich, full-bodied and devastatingly smooth overdrive.

Review by Sound on Sound

Demo by Brett Kingman

Blackbird

The Tube-Vibe™ is a no compromise, innovative and original re-design of the classic Uni-Vibe pedal. However, instead of transistors, the Tube-Vibe utilises vacuum tubes, photocells and a pulsating filament lamp to generate exceptionally rich, swirling chorus and vibrato effects.

Tube Vibe

On more subtle settings the Phaseomatic tube phaser pedal creates a beautiful, natural sounding vibrato (frequency modulation) and shimmering phasing effects, utilising exactly the same one- and two-stage “Cathodyne” tube circuitry used to in those incredible vintage Magnatone® amps. However, the Phaseomatic’s all-tube circuitry has two additional Cathodyne phase inverters, which allow it to generate a much richer, deeper vibrato and even intense, deep “tunnel” phasing as well as a host of cosmic and spacious sound effects heard on many 1950′s “B” science fiction movie soundtracks.

Phaseomatic Vacuum Tube Phaser

Für 15-25 FX-Pedale, 6 MOD-Slots – zwei Ebenen - **826 x 498 mm / 32.52" x 19.61"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 6 MOD slots, two levels - **826 x 498 mm / 32.52" x 19.61"** - available with Gig Bag or Flight Case

XXL guitar studio board

Miguel Angel Antonio Martínez Fuentes

Das DC7 ist ein professionelles Schaltnetzteil mit einem bemerkenswert flachen Profil von nur einem Zoll, das speziell für die Montage unter Pedalboards mit geringer Bodenfreiheit entwickelt wurde. Es bietet sieben isolierte DC-Ausgänge, von denen jeder bis zu 660 mA bei 9 V liefert, wobei pro Ausgang vier wählbare Spannungen zur Verfügung stehen. Das Gerät verfügt über einen 5V-USB-Ausgang für Mobilgeräte und einen 24V-Zusatzanschluss zur Systemerweiterung mit Einheiten wie dem CIOKS 4 oder 8. Eine fortschrittliche mehrstufige Filterung gewährleistet einen extrem rauscharmen Betrieb, ideal für stromhungrige digitale und empfindliche analoge Effekte. Das Netzteil nutzt einen universellen Netzeingang, was den weltweiten Einsatz ohne externe Transformatoren ermöglicht.

The DC7 is a professional-grade switch-mode power supply featuring a remarkably slim one-inch profile designed for low-clearance pedalboard mounting. It provides seven isolated DC outlets, each capable of delivering up to 660mA at 9V, with four selectable voltages available per outlet. The unit includes a 5V USB output for mobile devices and a 24V auxiliary port for expanding the system with additional units like the CIOKS 4 or 8. Advanced multi-stage filtering ensures ultra-low noise operation, making it suitable for high-current digital and sensitive analog effects. The power supply utilizes a universal mains input, allowing for worldwide use without the need for external transformers.

CIOKS

Review by Guitar Chalk

Wir haben das begehrteste parametrische EQ-Pedal mit bahnbrechenden Updates zurückgebracht.

Mehr Kontrolle
Egal, ob du versuchst, durch einen Mix zu schneiden oder ein Feedback-Problem zu beheben, du brauchst Präzision! Der ParaEq MKII bietet die meisten Kontrollmöglichkeiten aller Pedal-EQs auf dem Markt.

Mehr Leistung
Das ParaEq MKII-Pedal arbeitet intern mit 27 V und bietet einen sauberen Headroom ohne unerwünschtes Clipping.

Mehr Reinheit
Durch die minimale Schaltungstopologie - das Gegenteil von grafischen EQs - sind wir in der Lage, die meiste Kontrolle zu bieten, ohne den Klang zu beeinträchtigen.

We've brought back the most sought after Parametric EQ pedal with groundbreaking updates.

More Control
Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Power
The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity
We’re able to offer the most control without degradation to the tone due to minimal circuit topology­—the opposite of graphic EQs.

Empress Effects

Review by Bass Gear Magazine

ParaEq MKII

The PLASMA Pedal creates heavy distortion by amplifying an audio signal up to 3500 Volts and transforming it into electrical discharges. You are literally playing a bolt of electricity.

Gamechanger Audio

Website

Plasma Pedal

This little green wonder is the world’s smallest tube buffer pedal. Inside is a Sylvania pencil tube operating at 300V, which means the Glass-A™ can effortlessly handle massive signal levels and transients from piezo crystal and high-output active magnetic pickups without distortion for an incredibly open, natural and transparent sound.

Glass-A Triode Buffer

Das leistungsstarke Atomic™ Isolated Power Supply wurde entwickelt, um den hohen Stromanforderungen der Effectrode-Röhrenpedale gerecht zu werden. Es verfügt über eine einzigartige „Soft-Start“-Spannungsfunktion, die das Aufblitzen der Röhrenheizfäden verhindert und die Lebensdauer der Röhren maximiert.
Wird mit einem länderspezifischen IEC-Netzkabel und vier DC-Stromkabeln geliefert.

The mighty Atomic™ Isolated Power Supply is developed to meet the high power requirements of Effectrode tube effects pedals. Includes a unique "soft-start" voltage capability, which eliminates tube heater filament flash and maximise the life of the tubes.\r\nSupplied with country-appropriate IEC power cable and four DC power leads.

Demo by Everything Guitar

Atomic Power Supply

thuy nguyen

The Carl Martin Octaswitch, already a legend in the guitar effect switching world, is on it's third evolution since the original.  These all analog units have received rave reviews throughout the guitar world and awards from companies like Premier Guitar.  The fourth version, named 'The Strip' is the smallest and most advanced, taking all the technology used in the first three and adding some amazing features that make the 'Octaswitch The Strip' the most versatile and simplest all-analog switching pedal on the market!

Carl Martin

Octa-Switch The Strip

Giorgio Garavaglia

Der High Pass Filter ist das perfekte Utility-Pedal zum Aufräumen der tiefen Frequenzen.
Der Hochpassfilter ist ein 12 dB pro Oktave tiefes Frequenzfilter. Der Drehregler steuert die Cutoff-Frequenz und reicht stufenlos von 25 Hz bis 190 Hz.
Die serienmäßige Eingangsimpedanz beträgt 1 MΩ. Wenn du einen akustischen Tonabnehmer hast, der eine spezielle Eingangsimpedanz erfordert, schreibe es in die Anmerkungen während des Check-Out, und wir werden die Anfrage ohne zusätzliche Kosten berücksichtigen. Die Ausgangsimpedanz beträgt 100Ω. Dieses Gerät funktioniert mit aktiven oder passiven Instrumenten, sowie mit anderen Geräten wie Pedalen, Vorverstärkern oder Effektschleifen.

The High Pass Filter is the perfect utility pedal for cleaning up the low end.
The high pass filter is a 12 dB per octave low frequency filter. The knob controls the cutoff frequency and ranges continuously from 25 Hz to 190 Hz.
The stock input impedance is 1MΩ. If you have an acoustic pickup that requires a specialized input impedance, write it in the notes during check-out, and we will accomodate the request at no extra cost. The output impedance is 100Ω. This device will work with active or passive instruments, as well as with other devices such as pedals, preamps, or effects loops.

Broughton Audio

Review by Reddit /guitarpedals

High Pass Filter

Für 15-25 FX-Pedale, 2 MOD-Slots - **820 x 424 mm / 32.28" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 2 MOD slots - **820 x 424 mm / 32.28" x 16.69"** - available with Gig Bag or Flight Case

analog-stereo rhodes

Jimmy  Cooper

CIOKS 4 Expander is the perfect companion to CIOKS DC7 in case you would like four additional outlets with four selectable voltages on each tap (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC. Simply connect CIOKS 4 Expander to your CIOKS DC7 via the courtesy 24V outlet and you are good to go.

But that is definitely not all – what makes CIOKS 4 Expander truly unique is the fact that you can power it with anything from 9V to 24V DC or 9V to 12V AC via the non-polarized DC socket input. Furthermore CIOKS 4 can even be powered by connecting it to a USB powerbank via its 5V USB C input or by using a tablet or laptop power supply with a USB C plug. This flexibility means that you can use CIOKS 4 Expander as a stand-alone unit and power it with almost any adapter including the 1-SPOT or GigRig Generator. You can also use the 24V output on a Strymon Zuma unit to power the CIOKS 4 Expander. It can also convert an unused AC outlet on your existing power supply into 4 isolated DC outlets. 

Demo by EytschPi42

Review by KVR Audio

Horst Balle

Old Blood Noise Endeavors

Dual Moving Filter

David Litaba

Simpel, solide und nützlich. Der JHS Mute Switch ist genau der einfache Stummschalter den du schon immer gebraucht hast. Tritt drauf und alles, was du daran anschließt ist sofort 100 % still!

Simple, solid and very useful. Have you ever needed a simple mute switch with no frills? Just hit the footswitch and anything plugged into the input is made 100% silent.

Demo by Pedal Empire

Mute Switch

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Du willst dein Signal splitten und nicht auf passive Geräte, die deinen Tone killen und Signal verlieren zurückgreifen? Hier hast du was du brauchst! Diese kleine Zauberbox nimmt dein Inputsignal und splittet es permanent in zwei gebufferte Ausgangssignale, sodass dein Sound nicht an Klarheit verliert. Schließ deine Gitarre ans eine Ende und schicke es an einen Tuner, Mixer, separaten Amp etc. und den anderen Ausgang an dein Pedalboard, wie immer.

Need to split your signal? Don’t want to settle for a passive device that will kill your tone and cause signal loss? This is what you need! This little box of magic takes your input signal and splits it into two always-on outputs that are buffered so you don’t lose clarity or tone in any way. Plug your guitar in and use one output to send your clean signal somewhere like a tuner, mixer, separate amp, etc... and send the other output through your board like normal.

Buffered Splitter

Peter Hoffmann

Der Sfx Sound micro-Thumpinator v1 ist ein dediziertes Hochpassfilter-Pedal, das für E-Bass entwickelt wurde. Seine Hauptfunktion ist das Entfernen von unerwünschten, unhörbaren Unterschallfrequenzen, die bei Verstärkern zu Clipping führen und den Sound, besonders bei hohen Lautstärken, undifferenziert machen können. Durch das Herausfiltern von Frequenzen unter einer bestimmten Schwelle strafft es den Low-End-Bereich, verbessert die Klarheit und optimiert die vom Verstärker gelieferte Energie. Das Pedal funktioniert mit Instrumenten- und Line-Pegel-Signalen und kann an jeder Stelle in der Signalkette platziert werden.

Bandwidth OptimiThe Sfx Sound micro-Thumpinator v1 is a dedicated high-pass filter pedal designed for bass guitar. Its primary function is to remove unwanted, inaudible subsonic frequencies that can cause amplifiers to clip and sound muddy, particularly at high volumes. By filtering out frequencies below a certain threshold, it tightens the low-end, improves clarity, and optimizes the energy delivered by the amplifier. The pedal works with both instrument and line-level signals and can be placed anywhere in the signal chain.zer: Cutting off fundamental frequencies below 30 Hz

SFX Sound

Demo by  NoPlaceForTheDead

Product Page for Version 2

Talkbass Forum

micro-Thumpinator v1

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

DC-2W Dimension C (Waza Craft)

The Element is a pedal that takes back the very essence of the analogue reverb,
which is obtained by physically stimulating springs thanks to the guitar signal.
Simply. No artificials. No calculations.
From beautiful mechanics coupled to analog signal processing.

Anasounds

Review by mixdownmag

Review by Premier Guitar

Element

Le Truand, is simply out of competition! This is the one that offers the richest sound!
With endless shpouingwingwigouing! A monstrous cavity and an unusual resonance.
You will have to find a place for him not far from the amp or near the pedalboard
because his size is really big! This is the team’s favorite.
That’s why we decided to propose it despite its size.

Demo by TonePedia

Demo by Peter Honoré

Le Truand Spring Tank

Sebastian Rosenfeldt

A mixer for today's gigging keyboard player

Designed for stage use, the Key-Largo allows you to connect up to three stereo keyboards, effects and volume pedals, and a laptop computer via USB, managing all these signals to send a balanced audio feed to a PA system for a seamless performance on stage. Three stereo analog inputs feature individual volume controls to balance levels, and each can be sent to a shared effects loop to add reverb or delay in an instant using a dedicated footswitch. A USB connection allows laptop computers to be integrated into the setup for control of soft-synths, and a built-in sustain footswitch and connections for a stereo volume pedal provide additional ways to control your performance.

Radial Engineering

Demo by Bonedo Synthesizers

Review by AMAZONA

Key-Largo

nova-bitch XL

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

BASS TUBE

Christopher Garrison

CIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal. Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go. 

Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for instance four for a Neural DSP Quad Cortex and two outlets for a Line HX Stomp), allowing you to run more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable setup and gives you more options for connecting additional pedals.

Crux

Janez Jelen

Wir stellen eine brandneue Version des Oracle vor – einen einkanaligen Röhrenvorverstärker, der von den legendären Portaflex-Bassverstärkern der 1960er Jahre inspiriert ist. Der gepufferte 1/4"-Ausgang bietet reichlich Verstärkung, um eine moderne Endstufe oder den Line-Eingang Ihres Recording-Interfaces zu speisen. Für den Einsatz als Effektpedal drehen Sie einfach den Master-Regler herunter (alle Regler auf 12 Uhr entsprechen Unity Gain). Der DI-Ausgang verfügt über einen hochwertigen Ausgangstransformator mit Mu-Metal-Abschirmung für einen extrem rauscharmen Betrieb.

Das Herzstück des Oracle ist eine einzelne 12AX7-Röhre, die aufgrund ihres geringen Rauschens und ihres guten Klangs ausgewählt wurde und über eine 300-VDC-Stromversorgung betrieben wird.

Introducing a brand new version of the Oracle - a single channel, vacuum tube pre-amplifier inspired by the iconic Portaflex Bass amps of the 1960's. The buffered 1/4" output provides ample gain to feed a modern power amp or the line input of your recording interface. For use as an effect pedal, simply turn down the Master control (all knobs at noon is unity gain). The DI output features a high quality output transformer, with Mu Metal shielding for ultra quiet operation.

The heart of the Oracle is a single 12AX7 tube, selected for low noise and good tone, and fed by a 300VDC power supply.

Oracle v2

Erfahre mehr über das LA1A Levelling Amplifier Compressor-Pedal von Effectrode auf PedalPedia – der umfassendsten Online-Ressource für Effektpedale ▶️ Offizielle Spezifikationen, Handbücher, Produktvideos und mehr