teerapat srisang

p bass 

Tester

The Microtubes Vintage is our tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.

Darkglass Electronics

Manual

Demo by  Prymaxe

Demo by  Musicmaker

Product Page

Review by Steve Cook, premierguitar.com

Review by Rainer Wind, bonedo.de

Demo by amosheller 

Demo by the bass channel 

Vintage Microtubes

Die Walrus Audio Julia ist ein komplett analoges Chorus/Vibrato-Pedal, das mit einigen Besonderheiten aufwarten kann. Obwohl es sich bei den beiden um alteingesessene Standard-Effektsounds handelt, versteht es der amerikanische Boutique-Hersteller, mit einigen Extras jenseits der Norm Interesse zu wecken.
So auch bei der Julia, bei der beispielsweise fließend mit einem Blend-Regler zwischen Chorus und Vibrato gewechselt werden kann. Dazu lässt ein Schalter die Wahl, den LFO zu Sinus- oder Dreieck-Wellenformen zu überreden. Was diese Funktionen klanglich bewirken, schauen wir uns im Folgenden an.

The Julia is a fully analog, feature-rich chorus/vibrato packed with a wide array of tonal landscapes begging to be explored. Updated for 2020, Julia now has top mounted jacks, soft switch bypassing and updated art from Adam Forster. 

Julia is able to produce mild smooth chorus, to seasick vibrato and everywhere in between. With controls like Lag, Dry-Chorus-Vibrato Blend, and selectable analog LFO wave shapes, you are able to dial in all types of classic and unique chorus/vibrato sounds; some settings giving a familiar feel while others are not found on traditional chorus pedals.

A special feature of the Julia is the Lag control. The Lag knob lets you set the center delay time that the LFO effect modulates from. From smooth and tight modulation at lower settings, to warbling detune at maximum, the Lag knob adds a new dimension to the traditional Chorus/Vibrato landscape. 

Walrus Audio

Review by guitar 

Review by bonedo 

Demo by Mike Hermans 

Demo by SweetWater 

Demo by Nobel Music 

Julia V2

PedalSafe Type B1

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

David Litaba

The 280 is an optical compressor that can go from light sustain to utterly smashed with the turn of a knob. Unlike faster non-optical circuits the 280 retains your high frequencies until you get into the more extreme settings. The 280 is ideal for chicken-pickin’, added sustain for leads, or snappy-slappy funk rhythm. The 280 also has enough output to be used as a lead boost with added compressor sustain. And like all of the updated DOD pedal, it has a modern power jack, LED, light but strong aluminum chassis, and true bypass switching.

Users Manual 

Product Page 

Product Demo 

Compressor 280

Roland Schmidt

KORG

Official Product Video

Pitchblack X mini

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Für 3-5 FX-Pedale - **318 x 142 mm / 12.52" x 5.59"** - erhältlich mit Gig Bag

For 3 - 5 FX pedals - **318 x 142 mm / 12.52" x 5.59"** - including Gig Bag

New Pedal Board

Valeton

OC-10 Octave

Tim Rilke

The DB 599 bass compressor gives bassists the ability to control their dynamics in a simple and compact format. Tailored around the specific needs of bass players, the DB 599 utilizes musically appropriate compression ratios and attack / release parameters to make dialing in your compressed tone a breeze. Simply add in the desired amount of compression with the COMP knob, use the GAIN control to adjust your volume, and take your bass sound to the next level – that’s it!

Aguilar

Review by amazona

DB 599 Bass Compressor

The EHX-2020-2.0 Pedal Tuner is super compact and takes up minimal space on your crowded pedalboard. Switchable True Bypass / Buffered Bypass for easy integration into any rig, while its +/- 1 cent tuning range and high visibility display provides an accurate, convenient solution to all your tuning needs.

Electro-Harmonix

2020 V2 Mini Tuner Pedal

PedalSafe Type L

Schutzabdeckung & RockBoard-Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & RockBoard Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Schutzabdeckung & universelle Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & Universal Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Das Dispatch Master V3 ist ein Delay und Reverb Pedal, desen Effekte unabhängig oder gleichzeitig verwendet werden können. Es hat eine Verzögerungszeit von 1,5 Sekunden und einen dynamischen Nachhall, der von natürlich, geräumig bis tief und höhlenhaft geht. Es verfügt über Regler für Time, Repeats, Reverb und Mix und ist True Bypass. Die Version 3 ist mit der neuen Flexi-Switch™ -Technologie ausgestattet, die den Fußschalter sowohl als Momentary- als auch Latching-Schalter nutzbar macht und basiert auf einer geräuschlosen, relais-basierter Soft-Touch-Schaltung! Der Flexi Switch Momentary Modus wird aktiviert, indem du den Fußschalter so lange gedrückt hältst, wie du den Effekt verwenden willst. Lasse ihn los und dein Signal ist wieder dry. Um das Dispatch Master als normales Pedal zu verwenden, drücke den Schalter einfach einmal, um es zu aktivieren, und erneut, um es in Bypass zu schalten. Das Dispatch Master V3 wird in Ohio, USA handgefertigt.

The Dispatch Master V3 is a delay and reverb pedal, whose effects can be used independently or simultaneously. It has 1.5 seconds of delay time and a dynamic reverb that goes from natural and roomy to cavernous and deep. It features controls for Time, Repeats, Reverb and Mix and it's true bypass. The V3 version features the new Flexi-Switch™ Technology, which allows you to simultaneously use momentary and latching-style switching. It's based on the silent relay-based soft touch switching! It works by pressing and holding the footswitch for as long as the effect it's been used, releasing it, and resuming for dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass. The Dispatch Master V3 is hand made in Ohio, USA.

EarthQuaker Devices

Official Product Page

EarthQuaker Devices Dispatch Master Delay & Reverb Demo - EarthQuakerDevices

Dispatch Master Digital Delay and Reverb Video Manual - EarthQuaker Devices

EarthQuaker Devices & Juan Alderete Present: Dispatch Master on Bass - EarthQuakerDevices

EarthQuaker Devices Dispatch Master V3 - Demo Video - Musiker TV

Dispatch Master V3

Jason Dalton

Darkglass Bass Board

Bill ONeal

Mit dem Darkglass Electronics NSG präsentiert der finnische Effektpedal- und Bass-Amp-Hersteller ein sehr hochwertig gefertigtes Noisegate-Pedal, das allein schon aufgrund seines asketisch anmutenden Designs aus der Menge heraussticht. Lediglich mit einem Regler ausgestattet bietet es die Einstellung des Thresholds und mit Soft-Mode und Hard-Mode zwei Arbeitsweisen des Gates – mehr nicht! Ob sich das NSG klanglich mit seinem radikalen Ansatz von den Mitbewerbern absetzt, soll dieser Test herausfinden.

The NSG: Noise Gate comes as a response to these annoyances. Utilizing an adjustable threshold level to filter out sounds below a certain threshold, allowing for only the desired audio to be seized.

Demo by BassTheWorld.com

Demo by  Erik Arkö

Review by stephan, gearnews.de

Review by Bassel Hallak, bonedo.de

Demo by Algam EKO 

Demo by Darkglass 

NSG Noise Gate

Their popular B3K V2 keeps the same grind as the original design and adds the ability to restore the mid frequencies. Now you can send your bass rig into meltdown without losing any clarity. If you're looking to add grind to your tone while maintaining your tonal core, you can't go wrong with the Darkglass B3K V2.

Review by no treble 

Demo by patric hunter 

Microtubes B3K v2

Designed to be the perfect complement to our distortion circuits, the flexibility and portability of the Harmonic Booster is also the perfect one-stop solution for gigging musicians in search of a precise and harmonically rich clean preamplifier.

Demo by Stuart Clayton

Review by TalkBass.com

Review by Naris Sebastian Stolz, amazona.de

Demo by BassTheWorld

Harmonic Booster

The Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog.

Demo by  BassTheWorld.com

Demo by  Guitar Interactive Magazine

THE BEST GUITAR COMPRESSOR I'VE USED | Darkglass Hyper Luminal Compressor

Hyper Luminal · Hybrid Compressor: Demo by Or Lubianiker

Review by CompressorPedalReviews.com

Hyper Luminal

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

Review by reddit /guitarpedals

StroboStomp HD

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

Sébastien HANROT

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Futur Big Bass Board 

Filippo Rimondi

Der MXR Tap Tempo-Schalter verfügt über eine einstellbare Tip/Ring-Konfiguration, sodass Sie die Verzögerungszeit einer Vielzahl von Delay-Pedaltypen steuern können. Dieser kleine Fußschalter ist robust gebaut und für ein langes Leben auf Tour geeignet.

The MXR Tap Tempo switch features adjustable tip/ring configuration so you can control the delay time of a wide variety of delay pedal types. This pint-sized footswitch is ruggedly built for a lifetime on the road.

MXR M199 TapTempo Switch

Lee Atkin

Entwickelt in Zusammenarbeit mit Bass-Professor und Klangkenner Ian Martin Allison ist der MXR Bass Synth ein Kraftpaket unter den Pedalen, das donnernde Sub-Oktaven, expressive Hüllkurven und üppige Modulationseffekte mit erstklassigem Tracking und Sustain bietet – dazu alle Funktionen, die Sie benötigen, um jeden einzelnen Aspekt Ihres Klangs zu formen.

Designed with low-end professor and tone connoisseur Ian Martin Allison, the MXR Bass Synth is a powerhouse of a pedal offers thunderous sub-octave, expressive envelope, and lush modulation effects with killer tracking and sustain—plus all the features you need to shape every detail of your tone.

Demo by Nate Navarro

Review by No Treble

Review by Gear News

Bass Synth MB301

David Graves

Born in the heart of NYC and raised on the road, the Tone Hammer Preamp DI has been an indispensable tool for bassists seeking inspiring tone and versatility. With its warm, rich, and dynamic sound, the Tone Hammer Preamp is an essential preamp/direct box for every bassist. The Tone Hammer features fully sweepable midrange frequencies, in addition to bass and treble controls. With the Tone Hammer’s pristine D.I., players are set for either studio or stage. Enhanced for even greater flexibility, the updated Drive circuit now provides an expanded range, allowing for increased gain and a dedicated control to finely tune your sound. You can go from modern slap sounds to vintage or overdriven, and everything in between. 18-volt operation gives the Tone Hammer plenty of headroom, and we’ve added a Headphone Out and Aux In, making it the perfect practice companion, whether on the road or at home.

Review by reddit /basspedals

Review by algam Benelux

Review by Talk Bass.com

Tone Hammer Preamp v2

The new GLX-D+ Wireless Guitar Pedal System features the WA305 Premium Guitar Cable, the GLXD1+ Digital Bodypack, and the GLXD6+ Guitar Pedal. Go wireless without compromising your tone or complicating your rig.

Shure

Review by Premier Guitar

Review by Guitar World

Demo by Basscoach Denis Busch

GLXD16+

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Origin Effects

Review by Compressor Pedal Reviews

Review by Gearnews

Review by AMAZONA

Manual download

Cali76 Bass Compressor (64 Black Panel)

Sam McAinch

The BASSRIG Super Vintage is, quite simply, a complete vintage bass amp in a pedal. Based on the iconic Ampeg® SVT®, we have used all-analogue circuitry to recreate a complete valve amp-style signal path, along with an all-analogue cabinet simulator, giving you all the warmth, feel and drive of this classic bass rig in one small box.
When the SVT® arrived on the scene in 1969, it rewrote the rulebook for purpose-built bass amplification. Thanks to its enormous power, deep bass, growling overdrive and purposeful control set, this tower of tone has remained the amp of choice for the most discerning bassists on the world’s biggest stages.
With XLR and ¼” outputs, the BASSRIG Super Vintage will fit seamlessly into any signal chain, no matter how simple or complex, and our powerful Amp Out EQ tailors your sound to work with any amp, meaning you never have to compromise on tone.

Demo by The Bass Channel

Demo by Origin Effects with Ian Allison

BassRig Super Vintage

Jürgen Eschmann

Midi-Controller / Page turner

Foot switch control in a stompbox design that easily integrates with your pedal board!

Cue audio, lighting, and effects
Start and stop backing tracks and metronomes
Send MIDI commands and custom DAW keys
Turn pages, read music, scroll lyrics and tabs
Capture video, photos, and more!

Airturn

BT500S-2

QuickMount Type UH

Universal-Pedal-Montageplatte für horizontale Pedale

Universal Pedal Mounting Plate For Horizontal Pedals

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

M288 Bass Octave Deluxe

Tristan NDinga

Ampero multi-effects processor proved itself to be a game changer for its huge tone, great versatility and tiny size. Since first launched, it quickly become popular among both starters and pro musicians. For the best possible portability, the footswitch amount on Ampero is limited – however for the players who want more flexibility on this unit, that's not enough…So here it comes the Ampero Switch, Ampero's best pal!

The Ampero Switch is an ultra compact momentary footswitch controller designed not only for Ampero, but also for other devices with momentary footswitch controller support. Featuring the same Aluminum casing and appearance theme design, Ampero Switch definitely matches your Ampero's vibe perfectly. Carefully selected footswitches and other components ensure comfortable switching and excellent endurance.

It's quite simple: connect the TRS jack to Ampero's EXP 2/FS jack with the attached TRS cable, then enter Global menu, find EXP 2/FS sub menu, set MODE to Dual FS. After this, you can assign any function you need to the footswitches.

HOTONE

Demo by HotoneAudio

FS-1 Ampero Switch

Andrea De Blasio

Sweetwater exclusive.
Multi-effect processor with the helix sound Over 300 effects and models from the Helix, M series and other Line6 products 6 Simultaneously usable amplifiers, boxes and effect blocks - including looper and IR loading Coloured LC display Integrated audio interface 3 Footswitches with colour-coded LED rings MIDI In and Out Expression pedal connection Input: L / Mono and Right Output: L / Mono and Right USB MIDI In and Out / Thru Headphone output FX loop Aux in Dimensions: 17.8 x 12.6 x 6.6 cm Weight: Approximatey 800 g Connection for 9 V DC 3 A power supply Includes power supply

LINE 6

Review by musicradar

Review by bonedo

Demo by Guitar Bonedo

HX Stomp - Cosmic Gray

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Alex Pini

My PedalBoard

Ausgestattet mit einer bassspezifischen Tuner-Schaltung für präzises Stimmen, selbst bei tiefen Frequenzen  
ULTRA BUFFER-Technologie, optimiert für Bass und umschaltbar auf True Bypass  
Einzigartiges Design mit großem Display in kompakter Größe  
Hohe Sichtbarkeit dank einstellbarer Helligkeit der Meter-LEDs  
Ultrapräzises Stimmen bis auf ±0,1 Cent genau  
Vier verschiedene Anzeigemodi

Equipped with a bass-specific tuner circuit for precise tuning, even at low frequencies
ULTRA BUFFER technology optimized for bass and switchable to true bypass
Unique design with a large display in a compact size
High visibility with meter LEDs which brightness can be adjusted
Ultra-precise tuning down to ±0.1 cents
Four meter display modes

Review by recording.de

Demo by Musiker TV

Pitchblack XS Bass

Der NS-2 eignet sich hervorragend, um Signal-Rauschen und lästige Brummgeräusche zu eliminieren, wobei der Klangcharakter des originalen Eingangssignals unberührt bleibt. Attack und Hüllkurve des Signals werden in keinster Weise beeinträchtigt, dank eines von BOSS entwickelten, einzigartigen Noise Detection-Schaltkreises, der den Gitarrenklang präzise von sämtlichen Störgeräuschen zu separieren vermag.

The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.