NIck Costa

My pedal board for solo gigs, designed for my dual output Gibson J160.

4 Signal paths: Acoustic, Electric, Beat Buddy, Vocals. 

The guitar signal chain goes through the FX loop in the DI to share some FX on both guitars (delay, reverb, octaver) and allows me to capture both in loop. It also runs through the harmony pedal to guide the key on vocal harmonies. The DI sends one blended output to mixer.

Beat Buddy syncs to Loop pedal via MIDI.

Board has a white LED strip underneath.

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Looping Board - All in One

Tester

Session circuitry enhances your acoustic pickup and imparts the rich sonic character that you’d expect from an experienced audio engineer using some of the world’s finest studio gear.
Unlike standard compression that can squash the entire range of your signal, the Session’s Comp EQ features 3 narrowly focused bands of compression that tame common problematic frequencies and uncover the voice of your guitar. The low, mid, and high frequency compressors are essentially “touch-sensitive” EQs that respond in real-time to your dynamics. The harder you strum, the more they compress and vice versa.

LR Baggs

Product Page

Review by Guitar IQ

Review by Gitarre & Bass

Manual

Demo by Guitar IQ

Demo by Clever Little Rodents

Align Series Session

Bring professional drums to your pedalboard. Built like a guitar pedal
stompbox, the BeatBuddy delivers authentic, studio-quality drum beats
wherever you play. Experiment with 220+ styles and 24 genres to find
your perfect match. Customize your performance with fills, transitions,
intros and outros by simply tapping your foot.

BeatBuddy’s dynamic, award-winning samples play in 24-bit studio-grade sound with
32-bit floating point processing. Utilize near-endless memory to add up
to 3 million songs using an SD card. Included BeatBuddy Manager software
lets you create and edit custom beats, create set lists and more.

Singular Sound

Review by Guitar Interactive Mag

Review by Sound on Sound

Demo by  60 Cycle Hum

Demo by  Zach Wirchak

Demo by Karl Golden Music

Official Product Video

Beat Buddy

Antony Douch

Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.

BOSS

Review by reddit /guitarpedals

Review by Six String Sensei

Review by Guitar World

Review by bonedo

Demo by  Pepe Music

OC-5

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Vocal Effects Stompbox with Guitar-Controlled Harmony, Reverb and Tone

TC Helicon

Review by Guitar Fella

Demo by Andertons Music

Harmony Singer

Cameron Taylor

The CopperSound Passive ABY pedal is a simple and handy utility device designed to split one input into two separate outputs, or combine two separate inputs into one output. Being a Bi-directional Passive device, its applications are only limited by your imagination! Use it to run and organize your stereo rig, switch between two instruments on the fly, or even as a mute switch for silent instrument changes. To make connections simple, the footswitch washers are color-coordinated to their corresponding output jack. Since this ABY is a passive device, power is only required for the status LEDs.

Coppersound

Passive ABY Switcher

Entdecke den RC-600 – den modernsten Looper der Welt. Mit ihrer erweiterten Bedienung und zahlreichen anpassbaren Funktionen führt die wegweisende Loop Station im Bodentreter-Format Gitarristen, Singer-Songwriter, Multiinstrumentalisten und andere Looping-Musiker in eine neue Ära kreativer Leistungsfähigkeit. Halte mehrere Mikrofone und Instrumente in hochwertigem Sound in 32-Bit auf sechs Stereo-Tracks fest und behalte jederzeit die Kontrolle. Hierfür sorgen neun frei zuweisbare Fußtaster sowie die umfangreichen externen Steuerungsoptionen. Und das ist erst der Anfang. Bearbeite den Sound deiner Loops mit der riesigen Effektauswahl, erhöhe den Groove mit den integrierten Rhythmen, route Audiosignale nach Belieben auf die drei Stereoausgänge, integriere deine DAW über USB und vieles mehr.

Meet the RC-600, the most advanced looper on the planet. Loaded with evolved features and customizable functions, this next-generation Loop Station ushers in a new era of creative power for guitarists, singer/songwriters, multi-instrumentalists, and other looping musicians. Capture multiple mics and instruments with six stereo tracks and premium 32-bit sound, and take full command with nine freely assignable footswitches and deep external control support. And that’s just the start—you can also color loops with a massive FX selection, groove with onboard rhythms, route audio as you like to the three stereo outputs, integrate with computer software via USB, and much more.

Demo by SoundCrunch

Review by Richard Purvis, guitar.com

Review by Loopstation

RC-600

Cory Gage

Der K&K Sound Pure Preamp ist ein kompakter externer Vorverstärker, der entwickelt wurde, um das Signal von Akustikgitarren-Pickups und anderen passiven Tonabnehmern zu verbessern. Er bietet eine rauscharme Schaltung mit einer dreibändigen Klangregelung (Bass, Mitten und Höhen) sowie ein internes Gain-Trimmpoti zur Anpassung der Verstärkung. Der spezielle Breitband-Mittenfilter und die hohe Eingangsimpedanz sorgen für eine natürliche, breitbandige Wiedergabe von 10 Hz bis 30 kHz, was ihn besonders effektiv mit Piezo-Pickups macht. Der Pure Preamp wird mit einer 9-V-Batterie betrieben und bietet mit seiner robusten Belt-Clip-Bauform klare, kraftvolle Klänge und einfache Klangformung.

The K&K Sound Pure Preamp is a compact external preamplifier designed to enhance the signal from acoustic guitar pickups and other passive transducers. It features a clean, low-noise circuit with three-band EQ controls (bass, mid, and treble) and an internal gain trim that lets you adjust the amplification from subtle to stronger boosts. Its wide-band midrange filter and high input impedance provide a natural, full-range response from 10 Hz to 30 kHz, making it especially effective with piezo pickups. Powered by a 9 V battery with long life and housed in a rugged belt-clip case, it delivers clarity, power, and simple tonal shaping in a small form factor.

K&K Sound

Demo by Fabian Holland

Demo by Hiroya Tsukamoto

Pure Preamp

Simon Katz

The Red-Eye Twin Instrument Preamp offers a simple, one-box, direct-connect solution for
musicians that play two instruments at the same gig or have an instrument with dual pickups. The
Red-Eye Twin works well with instruments having passive or active piezo pickups, electret
microphones or magnetic pickups such as electric guitars and basses. Performers that find the
Red-Eye Twin useful are, for example, those playing fiddle and mandolin, guitar and mandolin,
string bass and electric bass or dual pickup instruments

Fire Eye

Review by Fretboard Journal

Demo by Bass Whisperer TV

Review by acoustic guitar forum

Red Eye Twin

David Litaba

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

TC Electronic

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by TC Electronic 

Demo by Guitar World 

Polytune 3 Mini

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Simplifier features a 100% true analog preamp that recreates with obsessive detail the most useful and popular clean channel preamps in the market AC BRIT: Classic AC30 sparkly and tridimensional sound. A true British heritage since the 60's. AMERICAN: Classic blackface deluxe sound. Sweet and dynamic with a balanced response. By far the most used amp on studio recordings MS BRIT: Classic clean-to-crunch vintage plexi style amp. The sound that defined rock music.

DSM & Humboldt

Demo by Worship Tutorials

Demo by Brett Kingman

Simplifier Classic

James  Thain

The ProD2 is a high-quality ultra-compact stereo passive direct box that features custom-made Radial transformers. Essentially two ProDIs in one compact enclosure the ProD2 is a great choice for stereo keyboards, DJ equipment and consumer hi-fi systems. Its high-performance transformer has an exceptionally linear frequency response from 20Hz to 18kHz and is able to handle high signal levels without saturation making it ideal for electronic instruments. The ProD2 is housed in an extremely rugged two piece 14 gauge steel enclosure with a book-end designed outer shell that prevents damage to the switches, features a -15dB PAD for high output sources and ground lift switch to troubleshoot noise from ground loops.

Radial Engineering

Demo by Adam Likes to Rock

Review by audiofanzine

Review by Gearspace

PRO D2

Bart Gijde

FS-7 ist ein kompakter Doppelfußschalter zur Fernsteuerung von Effektpedalen oder zur Kanalumschaltung von Verstärkern. Zwei Fußschalter sind hintereinander angeordnet, was Platz auf Effektpedalbrettern spart. Zwei wählbare Modi für Latch oder Momentary ermöglichen die Steuerung einer breiten Palette von Geräten.

FS-7 is a compact dual footswitch for remote control of effect pedals or amp channel switching. Two footswitches are arranged in tandem, which saves space on effects pedal boards. Two selectable modes for latch or momentary allow for control of a wide range of equipment.

FS-7

The Volume (X) Pedal controls volume and FX parameters, featuring fully adjustable rocker tension and and a Low Friction Band-Drive for ultimate durability—all in a pedalboard-friendly housing.

Dunlop

Demo by W-Distribution

Review by Jim Dunlop 

Review by VAR GUITAR

Review by musicradar

VOLUME (X) PEDAL DVP3

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Pavle Ivanovic

Behringer

Behringer Xenyx 1002SFX

Strymon

Ojai r30

Zuma r300

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

andronik supersonik

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

amplified nation wonderland overdrive v2 combo board S

Miguel Angel Antonio Martínez Fuentes

Das DC7 ist ein professionelles Schaltnetzteil mit einem bemerkenswert flachen Profil von nur einem Zoll, das speziell für die Montage unter Pedalboards mit geringer Bodenfreiheit entwickelt wurde. Es bietet sieben isolierte DC-Ausgänge, von denen jeder bis zu 660 mA bei 9 V liefert, wobei pro Ausgang vier wählbare Spannungen zur Verfügung stehen. Das Gerät verfügt über einen 5V-USB-Ausgang für Mobilgeräte und einen 24V-Zusatzanschluss zur Systemerweiterung mit Einheiten wie dem CIOKS 4 oder 8. Eine fortschrittliche mehrstufige Filterung gewährleistet einen extrem rauscharmen Betrieb, ideal für stromhungrige digitale und empfindliche analoge Effekte. Das Netzteil nutzt einen universellen Netzeingang, was den weltweiten Einsatz ohne externe Transformatoren ermöglicht.

The DC7 is a professional-grade switch-mode power supply featuring a remarkably slim one-inch profile designed for low-clearance pedalboard mounting. It provides seven isolated DC outlets, each capable of delivering up to 660mA at 9V, with four selectable voltages available per outlet. The unit includes a 5V USB output for mobile devices and a 24V auxiliary port for expanding the system with additional units like the CIOKS 4 or 8. Advanced multi-stage filtering ensures ultra-low noise operation, making it suitable for high-current digital and sensitive analog effects. The power supply utilizes a universal mains input, allowing for worldwide use without the need for external transformers.

CIOKS

Review by Guitar Chalk

DC 7

Jimmy  Cooper

CIOKS 4 Expander is the perfect companion to CIOKS DC7 in case you would like four additional outlets with four selectable voltages on each tap (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC. Simply connect CIOKS 4 Expander to your CIOKS DC7 via the courtesy 24V outlet and you are good to go.

But that is definitely not all – what makes CIOKS 4 Expander truly unique is the fact that you can power it with anything from 9V to 24V DC or 9V to 12V AC via the non-polarized DC socket input. Furthermore CIOKS 4 can even be powered by connecting it to a USB powerbank via its 5V USB C input or by using a tablet or laptop power supply with a USB C plug. This flexibility means that you can use CIOKS 4 Expander as a stand-alone unit and power it with almost any adapter including the 1-SPOT or GigRig Generator. You can also use the 24V output on a Strymon Zuma unit to power the CIOKS 4 Expander. It can also convert an unused AC outlet on your existing power supply into 4 isolated DC outlets. 

Demo by EytschPi42

Review by KVR Audio

Review by Talk Bass.com

Now in an MXR mini housing, the Classic 108 Fuzz gives you all the same vintage fuzz tones in a much smaller footprint. Like its larger predecessor, it's loaded with the silicon BC-108 transistor for a round and dirty crunch. This Classic 108 Fuzz also has the same no-nonsense control interface—just crank the Volume and Fuzz controls to your liking and start riffing. Use the Buffer switch on the side to make the fuzz play nice with wah pedals.

Demo by Eric Merrow

Demo byGuitarristas

Review by Guitar.com

M296 Classic 108 Fuzz Mini

It's a much, much smaller than the ST-1 at only 3.9" wide x 4" deep, and more intelligent version of the epic Supa-Trem1. Sporting True-Bypass,Tap-Tempo, external Tap jack, Half/Double hold feature, up to 15dB boost, true Square, Sine, and the natural heartbeat-like Warble wave-forms! It also can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Don't forget, just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!

Fulltone

Demo by PJ and the Beard

Review by Gearnews

Review by The Gear Page

Supa-Trem Jr

Cited as a major influence by wah masters such as Hendrix, Clapton, and Vaughn, Buddy Guy helped establish the effect as part of the blues vocabulary. To honor his contributions we have created the Buddy Guy Cry Baby Wah, featuring the Fasel Inductor for a sweet and singing top end, and two distinct user selectable wah voices—choose "DEEP" for a big and throaty growl, or "BG" for Buddy's own warm and bell-like wah tone. Convenient side-mounted LEDs indicate which mode you are in, while a separate LED indicates effect on/off. Let your guitar sing the blues in style with the Buddy-approved polka dot graphics and custom signature tread.

Review by Simon Bradley, musicradar.com

Demo by Guitar World

BG95 Buddy Guy Cry Baby Wah

DC-2W Dimension C (Waza Craft)

Famous for its woody, organic and beautiful sounds of saturation, these legendary British amplifiers, the Super Lead &amp; Super Bass, have been delivering one of the all-time classic sounds for almost 50 years. Players like Jimmy Page, Paul Kossoff and countless other relied on this type of tone for their signature sound. Xotic has recreated this vintage masterpiece in a rugged small enclosure. The SL Drive offers very amp-like response and cleans up nicely with a roll of your guitar’s volume knob. The internal dip switches allow you to choose the sound characteristics of both 1959 models. The “Super Lead” setting offers a brighter tone with more gain, while the “Super Bass” setting has more low end with less highs. This compact design is a powerful tool for the working musicians.

Xotic

Demo by Guitarist

SL Drive

Die wohl beste Geheimwaffe, von der du wahrscheinlich noch nicht wusstest, dass du sie brauchst! Gerade wir Pedal-Nerds laufen Gefahr unseren Sound mit endlosen Pedalketten in den Ruin zu treiben. Der Feind heißt Kapazität, ein Problem das bei zu langen Kabelwegen undn ich zuletzt schlechten Schaltungen auftritt und das Signal High End kostet und es schwach und charakterlos klingen lässt. Ein Trugschluss, der dies noch unterstützt is die Annahme dass True Bypass immer gut ist, denn ganz stimmt dies leider nicht. Der Little Black Buffer kommt genau hier ins Spiel und versorgt dein Rig mit genau der richtigen Eingangsimpedanz, damit du am Ende einen klaren, natürlichen Sound hast, der klingt als hättest du dich direkt in den Amp gestöpselt.

This may be the greatest weapon you didn’t know you needed. For those of us who are a little “pedal happy” there can be some downfall to our tone. When running a pedal board with more than one or two effects, something called “capacitance” happens. This natural problem happens due to the amount of cable or line that your signal has to travel through, not to mention bad switching systems in certain pedals. The result is a very audible amount of high-end loss, weak signal, flabby bass and uncharacteristic pickup behavior in guitars. Another problem is the assumption that all “true bypass” is good. This isn’t true and actually can be worse than imagined. This is where the “Little Black Buffer” steps in providing the perfect input impedance to your rig and giving you the final result of clear, natural tone that sounds like you're plugged straight into your amp.

Official Product Page

Little Black Buffer

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making
Tape delays.
it is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.

T-Rex

Demo by Martin Klaja's Guitarchannel

Demo by Duskmos

Demo by T-Rex Effects

Review by GEOFF KING, mixdownmag.com.au

Replicator D'LUXE

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

TU-3W Tuner

Der SP Compressor hat eine hervorragende Klangqualität und bietet eine große Auswahl an Kompressor-Sounds von Vintage über subtil bis hin zu modern.
 
Er ist sehr flexibel und verfügt über einen Dry-Blend-Regler, bis zu +15 dB Boost und einen internen Dip-Schalter zur Attack-Steuerung.

The SP Compressor has superb tone quality featuring a wide variety of compressor tones from vintage, to subtle, to modern and more.

It’s super flexible and features a dry blend knob, up to +15dB of boost and an internal dip switch for attack control.

SP Compressor

Was haben die Sounds berühmter Gitarristen wie Page, EVH und Johnson gemeinsam? Sie alle nutzten die legendäre Echo-Maschine EP-3 als Vorverstärker. Wir haben diese Magie in einem neuen Xotic Effects-Pedal eingefangen: dem EP Booster. Wir haben die hochwertigsten verfügbaren Bauteile verwendet. Mit einem diskreten FET-Design und einem Ausgang mit niedriger Impedanz liefert der EP Booster bis zu +20 dB unverfälschten Boost mit multidimensionalen, schimmernden Höhen und Tiefen, ohne das Gehör zu ermüden. Über die internen DIP-Schalter können Sie die Boost-Frequenzen und EQ-Einstellungen wählen. Ein einfacher, reiner Boost, der dem magischen EP-3 Tribut zollt und die gefeierten Sounds der berühmtesten Spieler der Welt einfängt. Der EP-Booster – großartiger Sound beginnt hier!

What do the tones of renowned guitarist such as Page, EVH and Johnson have in common? They all used the legendary echo machine EP-3 as a pre-amp. We've captured that magic in a new Xotic Effects pedal, the EP Booster. We've used the highest quality parts available with a discrete FET design and low impedance output, the EP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies, and EQ settings. A simple pure boost that pays reverence to the magical EP-3 and captures the celebrated tones of the world's most famous players. The EP-Booster,great tone starts here!

Demo by Mike Hermans

EP Booster

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

tube board

Das leistungsstarke Atomic™ Isolated Power Supply wurde entwickelt, um den hohen Stromanforderungen der Effectrode-Röhrenpedale gerecht zu werden. Es verfügt über eine einzigartige „Soft-Start“-Spannungsfunktion, die das Aufblitzen der Röhrenheizfäden verhindert und die Lebensdauer der Röhren maximiert.
Wird mit einem länderspezifischen IEC-Netzkabel und vier DC-Stromkabeln geliefert.

The mighty Atomic™ Isolated Power Supply is developed to meet the high power requirements of Effectrode tube effects pedals. Includes a unique "soft-start" voltage capability, which eliminates tube heater filament flash and maximise the life of the tubes.\r\nSupplied with country-appropriate IEC power cable and four DC power leads.

Effectrode

Demo by Everything Guitar

Atomic Power Supply

This little green wonder is the world’s smallest tube buffer pedal. Inside is a Sylvania pencil tube operating at 300V, which means the Glass-A™ can effortlessly handle massive signal levels and transients from piezo crystal and high-output active magnetic pickups without distortion for an incredibly open, natural and transparent sound.

Glass-A Triode Buffer

We took a challenge and went a step further by designing the most compact size, top sounding, all-feature tap tempo tremolo effect pedal nowadays!

Starla is a synthesis of two precisely combined electronics. It is a superb sound quality analog tremolo controlled by a versatile digital tap tempo microprocessor via optical technology – a light source and photocell.

Dawner Prince

Demo by  Pyramxe

Demo by Alberto Barrero

Demo by Curtis Kent

Review by Guitariste.com

Review by delicious audio

Starla

ch ray

Say hello to the world’s most compact reorderable audio loop switcher.

A fully analog stereo loop switcher designed to break boundaries. 
Each stereo loop can be broken up into 2x mono loops with an Y-cable and in the looper used as 2x complete independent mono loops (Y-TRS-Cables). As these cannot be displayed in this tool (but often used to double the loops on big boards) we configured in this tool 3 stereo connections as 6x mono loops. 

ML10X is the answer for today's musicians.