Lee Atkin

Das RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay für Pedalboards bietet eine einfach zu realisierende, kabellose Verbindung zwischen deinem Instrument und deinem Pedalboard. Dabei nutzt es eine digitale Wireless Technologie, die eine beeindruckende Klangqualität, ein einfaches Setup und eine zuverlässige Nutzung für aktive Musiker garantiert. Das Wireless System arbeitet im 2,4 GHz ISM Band und kann so weltweit ohne Beschränkungen genutzt werden. Mit einem nutzbaren Frequenzbereich von 20 Hz - 20 kHz und nur 5 ms Latenz bleiben keine Wünsche offen. Die Patchbay-Sektion wurde entwickelt um Verbindungen und Anschlüsse des Pedalboards von der Unterseite nach außen zu führen, dir einen zentralen Zugangspunkt zu deinem Setup zur Verfügung zu stellen und um deine Kabelwege aufzuräumen und sortieren zu können. Die A, B, C und D TRS Buchsen sind als direkte, durchgängige Verbindungen von der Vorderseite des MOD 4 zu den entsprechenden Buchsen auf der Rückseite verkabelt. Damit kannst du deine Effekt-Kette so einrichten, dass du bei der Vorbereitung auf den Gig lediglich Kabel an der Vorderseite des Boards einstecken musst, anstatt unter dem Board zu hantieren.
- Wireless System Receiver + Patchbay für Pedalboards, inkl. Wireless Transmitter
- 2,4 GHz ISM Band für weltweite Nutzung
- 30 m durchschnittliche Reichweite (ohne Hindernisse)
- 24 bit / 48 kHz unkomprimierte digitale Signalübertragung
- 20 Hz - 20 kHz Frequenzbereich
- 5 ms Latenz
- 103 dB Dynamikbereich
- 85 dBm HF-Empfindlichkeit
- 0.2% Verzerrung (THD)
- 4 wählbare Kanäle
- passend für MOD Slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4x 6,3 mm Stereo-Klinke Thru (TRS)
- 1x 6,3 mm Mono-Klinke Receiver Audio Ausgang (TS)
- 1x DC 2,1 x 5,5 mm Hohlstecker Thru
- 1x AC IEC Thru
- 1x USB Type A Charge Ausgang
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Batteriebetrieb nicht unterstützt
- Stromaufnahme 500 mA
- passiver Betrieb möglich (nur Patchbay, ohne Wireless System)
- Abmessungen mit Frontplatte (B x T x H): 175 x 85 x 47 mm
- Abmessungen ohne Frontplatte (B x T x H): 160 x 85 x 33 mm
- Gewicht 500 g
- Wireless Transmitter, zwei Antennen, ein USB Kabel, Montageschrauben und Muttern im Lieferumfang enthalten

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
- wireless system receiver + patchbay for pedalboards, incl. wireless transmitter
- compatible with guitar wireless system
- 2.4 GHz ISM band for worldwide use
- 30 m / 100 ft. approx. range (without obstacles)
- 24-bit / 48 kHz uncompressed digital transmission
- 20 Hz - 20 kHz frequency range
- 5 ms latency
- 103 dB dynamic range
- 85 dBm RF sensitivity
- 0.2% total harmonic distortion
- 4 selectable channels
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- detachable front plate for mounting on top or underneath pedalboards
- 4x 6.3 mm / 1/4" stereo thru (TRS)
- 1x 6.3 mm / 1/4" mono receiver audio output (TS)
- 1x DC 2.1 x 5.5 mm barrel thru
- 1x AC IEC thru
- 1x USB Type A charge output
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- battery operation not supported
- current draw 500 mA
- passive operation possible (patchbay only, without wireless system)
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 500 g / 1.1 lbs
- incl. wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

Analog flex

Tester

The JP95 John Petrucci Signature Cry Baby® Wah is the result of the legendary prog metal shredder's years-long quest to hone his perfect wah tone. For years, John used the Cry Baby Rack Wah system to tweak and fine-tune its numerous parameters until he found the sound that perfectly represents all the expression and intensity he needs. Recently, he and Dream Theater engineer Richard Chycki worked with the Cry Baby design team to replicate and further fine-tune that sound with a single pedal. This is a wah that, as John puts it, "sounds huge and badass like an angry, screaming monster with the ultimate expressive range—it's perfect for shaping single notes or manipulating growling, heavy chords."

Dunlop

Product Page

Review by The Gear Page

Review by Premier Guitar

Review by bonedo

Review by Gitarre & Bass

Manual

Demo by TOKYO SOUND PROJECT

Demo by PMTVUK

JP95 John Petrucci Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Michael Hodgson

The EP-25K features a 25K Ohm potentiometer that is required by some devices compared to the 10K potentiometer in the Mission EP-1. The two isolated outputs can be used to control two effects simultaneously.

Mission Engineering

Demo by Sean Pierce Johnson

EP-25K Expression pedal

Vielleicht haben wir endlich Bliss gefunden.

Dies ist das berühmte Fuzz mit fünf Knöpfen und zwei Germaniumtransistoren, bei dem wir schon immer davon geträumt haben, mit ZVEX zusammenzuarbeiten. Kurz gesagt, es ist eine aufgemotzte Fuzz Factory – mit digitaler Steuerung und einem resonanten Tiefpassfilter.

Obwohl die fünf Knöpfe nach den Parametern benannt sind, über die sie anscheinend die meiste Kontrolle haben, halten Sie uns bitte nicht daran fest. Sie sind Steuerelemente für verschiedene Betriebspegel und Vorspannungen, mit denen Sie Ihr persönliches Fuzz gestalten können.

Wie bei allen Chase Bliss Audio-Pedalen können alle diese Einstellungen in Voreinstellungen gespeichert, hochgefahren oder über ein Expression-Pedal gesteuert werden. Jeder Knopf und Schalter ist mit einem kleinen digitalen Gehirn verbunden, während Ihr Gitarrensignal 100 % analog bleibt und nie digital verarbeitet wird.

We may have finally caught bliss.

This is the very famous five-knob, two germanium transistor fuzz we've always dreamed of collaborating with ZVEX on. In short, it's a souped-up Fuzz Factory -- with digital control and a resonant low-pass filter. 

Although the five knobs are named for the parameters over which they seem to have the most control, please don't hold us to it. They are controls for various operating levels and biases, shaping you a personalized fuzz. 

Like all Chase Bliss Audio pedals, all of these settings can be stored in presets, ramped, or controlled via an expression pedal. Every knob and switch is connected to a little digital brain while your guitar signal stays 100% analog and never gets digitally processed.


Chase Bliss

Demo by  Pedalboards of Doom

Demo by Knobs

Official Website

Review by guitar pedal X

Review by delicious audio

Review by reddit /guitarpedals

Manual 

Bliss Factory

Niclas Wego

Basierend auf dem gleichen Konzept und den Möglichkeiten des Flaggschiffs BOSS ES-8, ist der BOSS ES-5 eine minimal abgespeckte Version, die im deutlich kleineren Gehäuse daher kommt und somit ohne Mühe auch auf kleinere Pedalboards passt. Alle wesentlichen Bedürfnisse von Gitarristen und Bassisten werden auch hier bedient. Die kreativen Möglichkeiten für Pedalboard-Systeme, die der ES-8 ermöglicht, sind jetzt auch für kleinere Anwendungen erschwinglich. Erweitere dein Pedalboard mit dem kleinen ES-5 und du spielst in einer völlig neuen Liga. Von jetzt an wirst Du deine Effektpedale völlig anders einsetzen.

Based on the same concept and features as the flagship ES-8, the ES-5 is pared down to offer more practical and essential use options for typical guitarists and bassists, and is drastically reduced in size to fit ready-made, standard-size boards. The innovation in creativity of pedalboard systems made possible by the ES-8 has become more available and affordable. Expand your board just by one size and incorporate the ES-5, then you are in for a whole new world of musical expression, not just another utility tool. From this day on, the use of stompboxes will never be the same.

BOSS

Review by Paul White, soundonsound.com

Review by Thomas Dill, bonedo.de

Demo by GUITARGUITAR

Official Product Video

ES-5 Effects Switching System

Tavish Stone

The LIGHT Pedal combines all the best features of a classic spring reverb with an innovative infrared optical sensor system and a unique effects section. Create countless new types of reverb textures that have never been possible before.

Gamechanger Audio

Game Changer Light Pedal Review by Ricky Tinez

Game Changer Light Pedal Demo by Game Changer Audio

Game Changer Light Pedal Review by 60 Cycle Hum

Game Changer Light Pedal Review by Andertons 

Review by MOD WIGGLER

Review by Sound on Sound

Light Pedal

ch ray

Der ELIPSE definiert die klassische Modulation neu und bietet nahtloses, kontinuierliches Morphing zwischen analogen Effekten - von üppigen, weichen Chören und warmen Phasern bis hin zu düsenartigen Flangern und rhythmischen Tremolos.
Der Kernom ELIPSE eröffnet einen grenzenlosen Spielplatz für Ihre Kreativität mit analoger Wärme und MIDI-Steuerung.

The ELIPSE redefines classic  modulation, offering seamless, continuous morphing between analog  effects—from lush, smooth choruses and warm phasers to jet-like flangers and rhythmic tremolos.
The Kernom ELIPSE opens up a limitless playground for your creativity with Analog warmth and MIDI control.

Kernom

Demo by Sasha Ivantic

Eclipse

Michael McCarron

I love nearly everything about the new Suhr Discovery Analog BBD Delay. It sounds fantastic, and does that smart Chase Bliss Audio thing of Analog Heart with a Digital Control Layer. You can scroll through 127 onboard Presets (via footswitches also) - and through smart filtering and Refine Up/Down controls you can vastly extend the delay time - without experiencing noisy artefacts.

Suhr

Review by AMAZONA 

Demo by Rabea Massaad 

Demo by Suhr Custom 

Demo by Pete Thorn 

Discovery

chris wilson

You always wanted to have the perfect, organic drive tone. Jump into the Kernom world and take your creativity to the next level with the RIDGE.
No matter if you are looking for an overdrive to play blues or heavy guitar riffs, the MOOD knob on the RIDGE is an intuitive and unique way to access all clipping flavors : symmetrical, asymmetrical, soft or hard clipping, and everything in between. 

Demo by Tone Factory

Demo by Andertons

Ridge

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

MOOD MKII is a different kind of multi-effect. Its two channels are aware of each other and work together. One half samples and loops brief moments, the other is a collection of real-time spatial effects.

Twist any sound into a sprawling texture that you can freeze, loop and scatter across the stereo field, for instant gratification and endless exploration.

It’s a musical chemistry set. Transfer, combine, and get lost.

Video Manual

MOOD MKII - Light Bright Edition

Wombtone is back with some new tricks.

The Billy Strings Wombtone collects multiple styles of phasing in one place, using a rich, all-analog signal path. You can now control the phasing directly with your playing, for responsive and tightly-synced movement. If there’s a phase sound you’re dreaming of, it’s probably in here.

The Billy Strings Wombtone follows the loudness of your playing and uses it to manually control the phase.

Explore reactive ripples and wobbling waves, all tight-synced to the dynamics and nuance of your fingers. Or route the envelope to control any (or multiple) of the Wombtone’s knobs.

Billy Strings Wombtone Ltd

MOOD is a different kind of multi-effect. Its two channels are aware of each other, and work together. One half samples and loops brief moments, the other is a suite of real-time spatial effects.

You can even spill audio back and forth between the two channels for endless shaping: Run a time-stretched loop through a cloud of delay taps, re-sample it, and carry on.

It’s a musical chemistry set. Transfer, combine, and get lost.

Demo by Official Product Video

Midi Manual

MOOD MKI

Lossy captures the special kind of degradation that happens to digital audio when it’s shrunk, transferred, and compromised.
Streaming music on a 56k modem, an MP3 ripped from a CD-R, a viral video from 2007 played through a cellphone. 
All the nasty and beautiful mistakes of heavily deconstructed digital audio in an easy-to-tweak real-time pedal.