Combo

Neuro Hub on bottom of board
Power Supply: Truetone 1 Spot CS6

Jazz Bass

Bass Main Board w/FX to Amp (v.2)

The CompIQ STELLA Pro is a meticulously crafted, all-analog compressor pedal for guitar and bass. It can be powered by an external supply or an internal battery and is built around the top-of-the-line 4320 THAT Analog Engine®, providing unmatched control and versatility
Key features
True analog bypass
Blackmer® VCA analog compressor
Optional DITOS board for transformer-coupled balanced output (10KΩ impedance)
True RMS-level detector
Ratio 1:1 – inf:1 (limiter)
Threshold -40dBu to +10dBu
Make-up Gain -6dB to +20dB
X-EQ with selectable frequency pivot 330Hz for bass or 1KHz for guitar
Soft/Hard compression knee
Manual timing: attack 0.12 to 12 ms/dB of gain reduction, release 1.2 to 120 ms/dB of gain reduction
Fast/Slower dynamic auto attack and release timing with hold for peaks over the threshold
Normal/Low/Deep side-chain filter
Dry/Wet mix
Tape Saturation on the dry line with Level compensation and Low/High-frequency cut filters (jumper selectable)
8-LEDs gain reduction meter
Hi-quality FET audio ICs, low tolerance parts, Panasonic & Kemet audio capacitors
Genuine Hammond black-powdered aluminum enclosure
Runs on standard 9V internal battery or 9-18 V DC external power supply (not included), center negative, 12mm long barrel plug
3-years warranty (direct to manufacturer, international, transferable

Becos FX

Manual

Demo by BECOSFX

Demo by Brett Kingman

CompIQ Stella Pro

Tester

Der Neuro Hub v1 verbindet mehrere One Series und Soundblox 2 Pedale zu einem Multi-Pedal-System. Source Audios neue "Scene Saving" Funktion ermöglicht es dir 128 Einzel- oder Multi-Pedal-Presets (so genannte "Scenes") zu erstellen, die einzeln per MIDI Program Change Befehlen aufgerufen werden können. Die Soundblox Effekte wunschgemäß einstellen, an der Hub "Save" drücken und schon sind alle Reglereinstellungen gespeichert. Programmierbarkeit ohne die komplizierte Navigation eines umfangreichen Multieffektprozessors.

Per Dual Expression Pedal und/oder dem drahtlosen Hot Hand Effektsteuerungssensor kann jedes Pedal über die Hub gesteuert werden. Jede "Scene" ermöglicht die gleichzeitige Steuerung von mehreren Effektparametern und Effektpedalen per Hot Hand und Expressionpedal.

Der Hub kann per USB Port an PC, Mac oder iPad (mit einem Camera Kit) angeschlossen werden und ermöglicht Updates, Editieren und Speichern von Presets und vieles mehr. Im Lieferumfang enthalten sind ein 9V DC Netzadapter, drei 1/8“ Miniklinke-Kabel und ein mini-USB-Kabel.

The Neuro Hub v1 unites all your One Series and Soundblox 2 pedals into a thoroughly integrated multi-pedal system. This breakthrough in effect technology introduces Source Audio’s new scene saving functionality, enabling the creation of up to 128 single or multi-pedal presets (i.e. “scenes”), each recallable via MIDI Program Change messages. Simply dial in your Soundblox effects as you would any fully loaded pedalboard, hit SAVE on the Hub and your pedal settings are captured! Enjoy the power of one-step scene recall without the headache of navigating a complicated multi-effects processor.

Connect the Dual Expression Pedal and the Hot Hand Wireless Effect Controller to the Hub and assign external control to any pedal on your board. Each scene can contain any number of external control configurations, including simultaneous Hot Hand and Expression Pedal control of multiple parameters on multiple pedals.

Connect the Hub to a PC, Mac, or iPad (with a camera kit) via the USB port, for updates, saving and editing presets, and much more. The Hub also includes a 9V DC power adapter, three 1/8” sensor cables and one mini-USB cable.

Source Audio

Official Product Page

Demo by ProGuitarShopDemos

Demo by Seanomatopoeia

Review by Talk Bass.com

Review by The Gear Page

Neuro Hub

David Litaba

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

TC Electronic

Product Page

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by TC Electronic 

Demo by Guitar World 

Polytune 3 Mini

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Sonic Stomp Mini MS-92

Kick your playing into high gear with SPARK MINI BOOSTER, a stompbox-wonder for the initiated that features a completely clean boost with some serious tone enhancement under the hood once you really start cranking things.

With a full 20 dB of boost, SPARK MINI BOOSTER is a great clean booster. But that’s not all it does – keep turning that knob and it’ll start working its magic driving gear into peak performance! No matter what your style or set-up, this musical miracle will maximize your potential – but let your core tone shine through completely unaltered.

PrimeTime is a radical new feature that is exciting guitarists around the globe. Put simply, SPARK MINI BOOSTER instantly understands whether you want the pedal to be on permanently when you hit the footswitch, or just when you hold the footswitch down. Which totally rocks for both ‘always-on’ and ‘emphasizing passages’ situations.

By adding a discrete, fully analog circuit, SPARK MINI BOOSTER adds a purely magical sense of life and excitement to your gear and tone. Each part of the circuit is carefully selected, from transistor to capacitor and from resistor to diode. What does that mean? Sweet, pure tone in all of its glory in an unparalleled clarity with zero coloration. Whether you want to make things sing or roar, this circuit ensures to maximize your tone.

Review by bonedo

Review by Daniel Rettberg

Demo by Reverb

Official Product Video

Spark Mini Booster

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

Der One Control Gecko MKIII ist eine kompakte und leichte Lösung um schnell die MIDI-Programme an mehreren Geräten umzuschalten. Viele Effektpedale nutzen eine MIDI-Steuerung und die Möglichkeit schnell und direkt auf verschiedene Presets zugreifen zu können ist inzwischen eine der wichtigsten Anforderungen bei vielen Live-Shows. Der Gecko MKIII bietet Musikern drei wählbare Schalt-Modi (Select, Instant, Direct) für insgesamt 20 Presets. Jedes Preset kann ein Program Change (PC) Signal in jedem der 16 MIDI-Kanäle speichern. Außerdem lässt sich in jedem MIDI-Kanal das Control Change (CC) Signal festlegen, das gesendet wird, wenn man den OK/TAP Fußschalter tritt. Da man das CC Signal für jeden Kanal frei bestimmen kann, lässt sich so das Tap Tempo von bis zu 16 Geräten gleichzeitig kontrollieren.

The One Control Gecko MKIII is a compact, lightweight solution for quickly switching between programs on MIDI devices. With an increasing number of guitar pedals being built with MIDI capabilities, having the ability to access presets in a quick and efficient manner has become an important part of playing live. The Gecko MKIII gives guitarists three modes to access programs (Select, Instant, Direct) and features 20 presets. Each preset can store one PC (program change) message for each of 16 MIDI channels. Also, for each MIDI channel, you can set the CC number to send when pressing the OK/TAP footswitch and use it as tap tempo control. Since you can set individual CC numbers for each channel, you can control tap tempo of up to 16 devices at once.

One Control

One Control Gecko MKIII - One Control MIDI Controllers - Review Video - JayLeonardJ

Review by Sweetwater Customers

Gecko MkIII

BP1 Compact packt die Essenz unseres BP1 Bass-Preamps in ein kompaktes Stompbox-Format. Der Kernklang und das geringe Rauschlevel bei deutlich kleinerer Stellfläche!


BP1 Compact crams the essence of our BP1 Bass Preamp into a compact stompbox. The core tone and low noise level at a much smaller footprint!

Caveman Audio

Demo by Gregor Fris

Review by Bass Musicians Magazine

Review by Sound On Sound

Quick Start Guide

BP-1 Compact

Der Gemini Chorus aus der One Series ist ein State-of-the-Art Stereo Chorus. Verpackt in einem kleinen pedalboard-freundlichen Gehäuse birgt es eine unglaubliche Flut an hypnotischen, sanften, Wellen an Chorus. Drei, über Kippschalter abrufbare Modi machen den Gemini bereits werksseitig zu einem enorm vielseitigen Chorus Pedal mit allen Regelmöglichkeiten, die man von derlei Effekten gewohnt ist. Verbunden mit dem Smartphone macht die Source Audio Neuro App jedoch noch eine Vielzahl an weiteren Möglichkeiten zugänglich. Hier hat der gewiefte Nutzer auch Zugriff auf eine ständig wachsende Bibliothek an Modulations Algorithmen. Hierzu gehören nicht nur Chorus Effekte, sondern auch Phaser und Flanger.

The One Series Gemini Chorus is a state-of-the-art stereo Chorus. Cramped into a pedal board friendly housing one finds an incredible flood of hypnotic, smooth waves of choral sounds. Three modes, selectable via toggle switch make the Gemini a very versatile Chorus pedal right out of the box. All the controls one is used to are there. Connected with a smartphone, however, the Neuro App makes a lot more parameters accessible. Here the smart user also gets access to a vast and ever-growing library of modulation algorithms, amongst which there are also Phasers and Flangers.

Source Audio SA 242 Gemini Chorus - Official Demo

Source Audio SA 242 Gemini Chorus - Review by Bonedo

Source Audio SA 242 Gemini Chorus - Review by Gitarre&Bass

Source Audio SA 242 Gemini Chorus - Review by Muzikus

Gemini Chorus

QuickMount Type SR1

Pedal-Montageplatte für SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ Pedale

Pedal Mounting Plates for SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ pedals

What exactly does the Ultrawave Multiband Bass Processor do? Initially, the incoming bass signal is divided into different frequency bands. You can choose between 1, 2, 3, 4, 8 or 10 bands specially chosen for the bass. There are a total of 37 different options for combining different frequencies. In the next step, the different frequencies can be assigned different effects. On board are 44 different distortion/overdrive/fuzz effects, a dual-channel compressor, a multi-band tremolo and a graphic 8-band EQ. Everything is controlled via a Neuro Desktop Editor (Mac and Windows) or the mobile app (iOS and Android). The sounds are loaded onto the pedal via USB and can be called up there as presets and further processed with the controls.

To develop such a complex pedal requires a lot of know-how. The American company Source Audio, founded in 2005, has more than enough of them. Their innovative products have been setting the standards in the field of digital effects for years! It is not without reason that greats like David Gilmour, U2, David Bowie, John Mayer, Aerosmith, Phish, King Crimson, My Morning Jacket, The Cure and Victor Wooten trust the pedals of the Californians.

One reason for the company's success is definitely the willingness to work directly with the musicians. The Ultrawave Multiband Bass Processor was developed together with bassist Nathan Navarro , who is one of the most sought-after musicians in the prog rock scene and is also a big star on YouTube. The world of effects has long been his passion and his distinctive sounds are in demand around the world in the studio and on stage.

Endless possibilities - the new benchmark in the digital sector!

SOURCE AUDIO ULTRA WAVE BASS

How To Use Audio Compression For Bass

Ultrawave Bass

Der Source Audio C4 Synth kombiniert alle Sound Construction Tools eines klassischen Eurorack Modular-Synthesizers in einem kompakten, einfach zu nutzenden Effektpedal für Gitarre und Bass. Grundlegend handelt es sich bei dem C4 um ein Modular Synth, der vor allem durch ein beispiellos akkurates Tracking, extrem schnelle Reaktionen und fast unendliche Sound-Möglichkeiten überzeugt. 

Für eine einfache Plug-And-Play Anwendung kommt das Pedal mit sechs wählbaren Presets, die sich über den Toggle Switch auswählen lassen. Über einen MIDI-Controller lassen sich außerdem die 128 Factory Presets auswählen. In Kombination mit dem kostenlosen Neuro Desktop Editor oder der ebenfalls kostenlosen Neuro Mobile App erkennt man erst das eigentliche Potential des Pedals. Über die Software hat man Zugriff auf einen Editor, der sich an Euroracks orientiert und 4 parallele Voices, 3 Oszillator-Wellenformen, 11 Envelope Follower, 24 modulierende Filter, Distortion, Tremolo, Pitch Shifting, einen intelligenten Harmonizer, programmierbares Sequencing und mehr bietet. Von klassischen Synthie-Tones bis zu allen Sounds, die du dir jemals vorstellen konntest - der C4 Synth macht es möglich!

The Source Audio C4 Synth unites all the sound construction tools of a classic Eurorack modular synthesizer and packages them in a compact and easy-to-use effects pedal for guitar or bass. It is essentially a modular synth in a box with unprecedented tracking abilities, lightning-fast response, and vast universe of easy-to-access sound options.

The C4 offers multiple methods of preset storage and recall. For a straightforward plug-and-play experience, simply select one of the pedal’s six onboard presets with the center toggle switch. The addition of a third-party MIDI controller with USB host provides access to any of the C4 Synth’s 128 Factory presets. Connect the C4 to the Neuro Desktop Editor (a free download for Mac and Windows) or the Neuro Mobile App (iOS and Android) and unlock the pedal’s true power. The Neuro software features a Eurorack inspired editing interface with 4 parallel voices, 3 oscillator wave shapes, 11 envelope followers, 24 modulating filters, distortion, tremolo, pitch shifting, intelligent harmonization, programmable sequencing, and more. Use the editor to create anything from classic synth tones to the sounds you've imagined, but never actually heard. Finally, for a world of great tones without all the tweaking, download sounds from the ever-expanding collection of published presets created by the C4 Neuro Community.

Once you’ve found your sound, burn it directly to the pedal in any of the C4 Synth’s 128 preset positions, save it to your own personal effects library, or share it with the rest of the C4 Neuro Community. Never before has a guitar synth pedal offered so much is such a small package.

Source Audio SA 249 - One Series C4 Synth - Demo Video (No Talking) - Guitar Bonedo

Source Audio SA 249 - One Series C4 Synth - Demo Video - Mike Hermans

Source Audio SA 249 - One Series C4 Synth - Bass Demo - Nathan Navarro

Source Audio SA 249 - One Series C4 Synth - Bass Demo - The Bass Channel

Source Audio Spectrum Intelligent Filter & C4 Synth - Review by Gitarre&Bass [DE], [01-2020]

Source Audio C4 Synth - Review by GrandGtrs [DE], [01-2020]

Source Audio C4 Synth - Review by Bonedo [DE], [12-2019]

Source Audio C4 Synth - Review by TopGuitar [PL], [11-2019]

Source Audio C4 Synth - Review by PremierGuitar [EN], [10-2019]

Source Audio SA 249 - One Series C4 Synth - Review by TopGuitar [PL], [08-2019]

SA 249 One Series C4 Synth

Für 5-10 FX-Pedale, 1 MOD-Slot - **522 x 236 mm / 20.55" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **522 x 236 mm / 20.55" x 9.29"** - available with Gig Bag or Flight Case

Anthony Camplone

Combustion

Stoner bass pedalboard

AD200 MK 3

thuy nguyen

The Red Muck puts on a few pounds, grows a new set of sharp teeth and is out to seduce even the most demanding Muff connoisseurs!

A Fuzz-Distortion pedal, inspired from the circuits of the ’71 “triangle” and the later “Red Army / Civil War” Muff. Along with our individual touch, the end result boasts a smoother sound, fatter low end, pronounced midrange and added tonal flexibility through the expanded range of the tone knob. The onboard MIX control allows you to discover your sweet- spot of the Dry / Wet signal ratio, while the second footswitch turns it into a 2-gain-stage pedal!

This pedal is equally capable at fuzzing things up just a bit to add some vintage wooly fatness to your bass lines, as it is at shooting those heavy riffs into sizzling yet controlled mayhem!

Jam Pedals

Review by Tone Pedia

Demo by Janek Gwizdala

Demo by Nate Navarro

Demo by BassTheWorld

Red Muck Bass

PedalSafe Type B3

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Schutzabdeckung & RockBoard-Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS MAKKO D1 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & Universal Mounting Plate For WALRUS MAKKO D1 pedals

Tuwi Yuwi

The Lucydreamer is a Dry / Wet overdrive created with today’s bass masters’ needs and wants in mind.

It packs the following functions / features:

Dry / Wet Mix control

High-gain-stage footswitch which doesn’t affect the dry signal’s level

Internal trimmer to set the high-gain stage’s output level

Its overdrive circuit can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube-amp-like break-up, all the way to full- bodied high-gain saturation!

Owing its clipping merits to our “secret” chip, the Lucydreamer fluently tackles all the traditional tasks of an overdrive pedal and at the same time invites you to discover new ways of bonding with your bass lines!

Widen your palette of sounds, minimize pedalboard real estate and elevate your tone with the Lucydreamer!

Review by reddit /basspedals

Demo by Zachary Rizer

Demo by Patrick Hunter

Demo by BassTheWorld.com

LucyDreamer Bass

ch ray

The JPTR FX Double Jive is a compact and versatile effects pedal that delivers an incredible range of tones and effects. With two separate channels and a variety of customizable controls, this pedal is perfect for guitarists and bassists who are looking to take their sound to the next level.

Whether you're looking to add some extra crunch to your riffs or want to create a more atmospheric sound, the JPTR FX Double Jive has got you covered. With its intuitive controls and high-quality components, this pedal allows you to dial in the perfect sound for any situation.

JPTR FX

Demo by John Browne

Demo by Obrad Lacarac

Review by Gitarre & Bass

Review by Tim schraubt Bass

Review by Gearspace

Double Jive

Line 6 HX Stomp ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Black

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Ibanez

Demo by Desert Rock United 

BIGMINI

QuickMount Type K

Pedal-Montageplatte für Mooer Micro Series Pedale und ToneX One

Pedal Mounting Plate For Mooer Micro Series Pedals and ToneX One

Teeratai Kaewmanee

 
BC1 is not like the standard bass compressor pedal. Not by a longshot!
We like the idea of using a compressor as an always-on Master Compressor – at the end of the signal chain. A compressor that tames and gently shapes the overall dynamics, giving you a pristine bass tone that makes you sound better, sit better in the mix and simply makes playing more fun!

BC1 is a 100% analog Master Compressor that makes the output from your strings more even and brings out all of the small nuances in your playing.

Demo by Caveman Audio

BC1 Bass Compressor

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Small Bass Pedalboard

Inspiriert vom 71er „Triangle“ und den späteren „Red Army / Civil War“ Muffs, bietet der Red Muck eine breitere Palette an Sättigung und verschiedene Grade an Kompression und Sustain.
Der Boost-Fußschalter aktiviert einen speziellen Teil des Schaltkreises, der separat abgestimmt ist, um das vordere Ende des Red Muck zu treffen und noch fettere Wände aus Fuzz-Verzerrung zu erzeugen, oder bei niedrigerer Gain-Einstellung als High-Gain-Stage-Fußschalter zu fungieren.

Inspired by the ’71 “triangle” and the later “Red Army / Civil War” Muffs, the Red Muck boasts a wider gamut of saturation and varied degrees of compression and sustain on tap.
The Boost footswitch engages a dedicated section of the circuit, separately tuned to hit the front end of the Red Muck and generate even fatter walls of Fuzz-Distortion or with the Gain set lower, function as a High-Gain-Stage footswitch.

Demo by Pedals & Friends

Demo by JayLeonardJ

Review by Audiofanzine

Review by Delicious Audio

Red Muck mk.2

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

Dave Sahanaja

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Orchestral  Pedal Board

The Ernie Ball Most Valuable Pedal provides a super smooth foot sweep, ideal for precise volume control with no high-frequency loss at any volume. Designed to maximize versatility, this pedal works with both active and passive electronics and is equipped with a minimum volume knob as well as a powerful gain boost, allowing players to increase the audio signal up to +20 decibels. And of course, as you've come to expect, the Ernie Ball MVP boasts a compact, rugged design, consisting of aircraft grade aluminum housing that is virtually indestructible. Requires DC 9V/100mA minimum power supply or 9V battery.

Ernie Ball

Demo by  Mr Z's Music Lessons

Demo by Algam EKO

Review by delicious audio

6182 MVP Mono Volume Pedal, 250k

Der One Control BJF Buffer Split verfügt über mehrere Funktionen, die das Pedal zu einer äußerst vielseitigen Utility-Box für Pedalboards machen. Das Pedal kombiniert die Funktionen der 1 Loop Box und der AB Box mit einem schaltbaren Buffer. Der BJF Buffer Split kann als A/B Switch, True Bypass Loop Switcher, Splitter oder sogar als Input Selector verwendet werden. Die seitlich angebrachten Schalter schützen die Einstellungen vor unerwünschten Änderungen und der schaltbare Buffer verhindert Signalverlust bei langen Signalwegen oder großen Effekt-Setups.

The One Control BJF Buffer Split has multiple functions which makes it an extremely versatile utility box to have on your pedalboard. It combines the functions of the 1 Loop Box and AB Box with a switchable buffer. The BJF Buffer Split can be used as A/B switch, true bypass loop switcher, splitter or even as an input selector. The side-mounted switches protect the settings from unwanted changes and the switchable buffer prevents signal loss at long signal paths or large effect setups.

Review by Chris Hauke, gitarrebass.de

Minimal Series BJF Buffer Split

Electro-Harmonix

Freeze

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Igor Katkov

Der Little Lehle III ist ein universelles Schalt- und Effekt-Looping-Tool, das für ein transparentes Signalrouting entwickelt wurde. Er verfügt über eine Mikrocontroller-gesteuerte True-Bypass-Relais-Schaltung mit aktiver Pop-Unterdrückung, um Schaltgeräusche zu eliminieren. Das Gerät verarbeitet Mono-, Stereo- und symmetrische Signale und kann als Effekt-Looper, A/B-Umschalter für Instrumente oder Verstärker oder als Tuner-Mute fungieren. Es bietet drei Betriebsmodi: Latching, Momentary und einen Mischmodus für kreative Stottereffekte. Das Gehäuse verwendet einen speziellen pilzförmigen Taster, der den Druck über eine Feder überträgt, um die interne Platine vor mechanischer Belastung zu schützen.

The Little Lehle III is a universal switching and effects looping tool designed for transparent signal routing. It features a microcontroller-controlled true bypass relay circuit with active pop suppression to eliminate switching noise. The unit handles mono, stereo, and balanced signals, allowing it to function as an effects looper, an A/B switcher for instruments or amplifiers, or a tuner-mute. It includes three operating modes: latching, momentary, and a mixed mode for creative stutter effects. The enclosure uses a unique mushroom-shaped button that transmits pressure via a spring to protect the internal circuit board from mechanical stress.

LEHLE

Thomann

Review by Thomas Dill

Official manual

Little Lehle III

The Stanley Clarke Signature Acoustic Preamp is a 2-channel preamp, built exclusively with premium components. It is engineered and designed by EBS together with the legendary bass player and composer Stanley Clarke.

Demo by Bass Bonedo

Demo by EBSSweden

Stanley Clarke Signature Acoustic Preamp

David Graves

The CompIQ TWAIN MK2 is an advanced tool for analog dynamic audio processing of bass, guitar, and keyboard signals, among other applications. Its extensive features provide exceptional control over compression parameters, enabling users to achieve outstanding sound quality and tonal characteristics. With its Auto Timing settings, the TWAIN is easy to set up and adjust for professional results. At the the flip of a switch, the TWAIN can function either as a dual-band compressor/limiter with a variable crossover point or as two stacked compressors with separate controls for each.

The optional DITOS Transformer-Coupled Balanced Output DI is available as an add-on. Built with Burr-Brown™ technology and advanced line drivers, the DITOS provides complementary signal conditioning and a warm musical voicing to any instrument.

Review by Compressor Pedal Reviews

Review by Sound on Sound

CompIQ TWAIN MK2

BP-1 Compact von Caveman Audio