chuck hale

New Pedal Board

Tester

The Timmy pedal has always been known for it's ability to provide a transparent overdrive to your amplifier while retaining the amps original tone. It's a fairly common thing for an overdrive to color tone, so why invest in a $1500 plus amp only to change it's inherent sound, right?

At low settings you will be able to effortlessly achieve a sound that is simply "more" of what your amp already offers. As the gain is turned up, and the pedal's EQ adjusted accordingly, smooth, singing, round and reedy tones are at your fingertips.

The Timmy pedal's responsiveness is exactly like that of a great, tube amplifier in that it responds immediately to your right hand's attack.

The Paul Cochrane Timmy is absolutely a legend in the world of overdrive pedals, and has been copied to a large degree over the years by several knock offs. 

Paul Cochrane

Demo by Mass Street Music

Demo by Living Room GD

Timmy v3

Beetronics

Octahive

No pedal holds more mystique than the legendary Klon Centaur overdrive. With its unique overdriven tones and boosting capabilities, this pedal has captured the imagination of players from Jeff Beck to John Mayer

The Archer is an exact tribute to the legendary Klon pedal featuring germanium diodes and captures every nuance of the original unit 

J. Rockett Audio Designs

Product Page

Review by bonedo

Manual

Demo by Guitarist 

Demo by Shawn Tubbs

Demo by Pete Thorn 

Demo by J.Rockett Audio Designs

Archer

Darren Phillips

The new passive DOD Mini Expression Pedal is just the right size for your pedal board, and your wallet. Rugged all-steel construction and gear drive means that there are no strings to break. Despite its compact form factor it is designed to have the same feel and throw as pedals that are twice its size (and price).

The Mini Expression Pedal features a TRS (25kΩ)/TS (10kΩ)/RTS (25kΩ) selector, making it flexible to work with most gear with expression pedal inputs. The non-slip rubber pads, and a peerless industrial design by DB Instrument Amp insure a high quality expression pedal that will last the test of time.

Demo by Ryan Hogle

Review by musicradar

Review by reddit /guitarpedals

MINI EXPRESSION

Für 3-5 FX-Pedale - **318 x 142 mm / 12.52" x 5.59"** - erhältlich mit Gig Bag

For 3 - 5 FX pedals - **318 x 142 mm / 12.52" x 5.59"** - including Gig Bag

RockBoard

Signature Board of our artist Pablo Scarpa from Italy.
Make sure to check out his Instagram-channel: 
https://www.instagram.com/that_pablo_show/

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

That Pablo Show

Roland Schmidt

Die RockBoard QuickMount Pick Box ist ein hilfreiches Zubehör für Musiker, die alles an einem Ort aufbewahren möchten. Nie wieder verlorene Plektren oder verschwundenes Zubehör! Dank des QuickMount-Systems benötigst du kein klebriges Velcro mehr, die Pick Box lässt sich fest und sicher in das RockBoard Slot Grid klemmen.

The RockBoard QuickMount PickBox is a useful accessory for musicians who want to keep everything in one place. No more lost picks or missing accessories! Thanks to the QuickMount system, you no longer need sticky hook & loop tape. The PickBox snaps securely into the RockBoard slot grid.

RockBoard PickBox

PickBox

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

TC Electronic

Review by Charleston Classical Guitar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Das Electric Vibe ist ein analoges Phaser/Vibrato-Pedal, das die klassischen Vibe-Sounds mit zusätzlichen einzigartigen Funktionen kombiniert.

Elektronisch ist es von der Univibe (TM) Schaltung inspiriert und verfügt über ein ähnliches optisches System zur Modulation des Signals durch vier Phasenverschiebungsstufen.

Die ENVELOPE ist wahrscheinlich das, was ihn am meisten auszeichnet. Wenn die Hüllkurvenfunktionen aktiviert sind, kannst du eine dynamische, reaktionsschnelle Modulation erhalten, die der Intensität des Saitenzupfens und Akkordschlagens genau folgt. Was bedeutet das eigentlich? Wenn zum Beispiel die SPEED- und/oder DEPTH-Hüllkurve aktiviert ist, kann die Modulationsrate/Amplitude entsprechend der rhythmischen Akzente variieren, was subtile oder dramatische Veränderungen des Effekts ermöglicht. Es ist wirklich so, als ob du den Effekt „spielen“ würdest!

The Electric Vibe is an analog phaser/vibrato pedal which combines the classic vibe tones with additional unique features.

Electronically it’s inspired by the Univibe (TM) circuit and features a similar optical system to modulate the signal by going through four phase shifting stages.

The ENVELOPE is probably what makes it stand out the most. When envelope functions are engaged you can get dynamic responsive modulation which accurately follows string picking and chord strumming intensity. What does it mean after all? For example with SPEED and/or DEPTH envelope engaged the modulation rate/amplitude can vary according to rhythmic accents, allowing for either subtle or dramatic changes in the effect output. It’s really like you are “playing” the effect!

OPFXS

Demo by Pair of Pandas

Demo by The Guitar Effect

Official Product Video

Demo by JayLeonardJ

Review by Premier Guitar

Electric Vibe

Das Dispatch Master V3 ist ein Delay und Reverb Pedal, desen Effekte unabhängig oder gleichzeitig verwendet werden können. Es hat eine Verzögerungszeit von 1,5 Sekunden und einen dynamischen Nachhall, der von natürlich, geräumig bis tief und höhlenhaft geht. Es verfügt über Regler für Time, Repeats, Reverb und Mix und ist True Bypass. Die Version 3 ist mit der neuen Flexi-Switch™ -Technologie ausgestattet, die den Fußschalter sowohl als Momentary- als auch Latching-Schalter nutzbar macht und basiert auf einer geräuschlosen, relais-basierter Soft-Touch-Schaltung! Der Flexi Switch Momentary Modus wird aktiviert, indem du den Fußschalter so lange gedrückt hältst, wie du den Effekt verwenden willst. Lasse ihn los und dein Signal ist wieder dry. Um das Dispatch Master als normales Pedal zu verwenden, drücke den Schalter einfach einmal, um es zu aktivieren, und erneut, um es in Bypass zu schalten. Das Dispatch Master V3 wird in Ohio, USA handgefertigt.

The Dispatch Master V3 is a delay and reverb pedal, whose effects can be used independently or simultaneously. It has 1.5 seconds of delay time and a dynamic reverb that goes from natural and roomy to cavernous and deep. It features controls for Time, Repeats, Reverb and Mix and it's true bypass. The V3 version features the new Flexi-Switch™ Technology, which allows you to simultaneously use momentary and latching-style switching. It's based on the silent relay-based soft touch switching! It works by pressing and holding the footswitch for as long as the effect it's been used, releasing it, and resuming for dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass. The Dispatch Master V3 is hand made in Ohio, USA.

EarthQuaker Devices

Official Product Page

EarthQuaker Devices Dispatch Master Delay & Reverb Demo - EarthQuakerDevices

Dispatch Master Digital Delay and Reverb Video Manual - EarthQuaker Devices

EarthQuaker Devices & Juan Alderete Present: Dispatch Master on Bass - EarthQuakerDevices

EarthQuaker Devices Dispatch Master V3 - Demo Video - Musiker TV

Dispatch Master V3 - Digital Delay / Reverb

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

THE ZZOMBEE “FILTREMULATOR” IS A ONE OF A KIND ANALOG MULTI EFFECT THAT DELIVERS FILTER, WAH, LFO, RANDOMIZED FILTER, TREMOLO, SWELLS, OVERDRIVE, FUZZ, LOW-OCTAVE AND THE NEVER BEEFORE HEARD HONEY PATENTED CROSS TREMOLO, A VERY UNIQUE KIND OF TREMOLO THAT PULSES BETWEEN THE FUNDAMENTAL AND A LOW OCTAVE.

ITS UNBEELIAVABLE ANALOG TONES ARE ENHANCED BY AN INNOVATIVE WAY OF RAMPING AND CONTROLLING MODULATION MOVEMENTS THAT USES A MOMENTARY FOOTSWITCH IN THE MOST MUSICAL WAYS. THESE CONTROLS MAKE THE PEDAL AN EXTENSION OF YOUR INSTRUMENT, BEECOMING AN ESSENTIAL TOOL TO EXPAND YOUR CREATIVITY.

THE SOUNDS FOUND IN THE ZZOMBEE ARE VERY UNIQUE AND WOULD REQUIRE A VERY COMPLEX RIG TO BE RECREATED. THATS BECAUSE THE INSTRUMENT SIGNAL GETS A 4 STAGE GAIN BUZZ SELECTION AND RUNS IN PARALLEL TO A MONOPHONIC LOW OCTAVE BEEAST, IN THE MOST BEETRONICAL STYLE. THE FILTER CAN BE APPLIED TO EITHER OF THESE WITH THE OTHER REMAINING UNTOUCHED.

THREE MODES OF MODULATED FILTER CAN CREATE WAH-LIKE EFFECTS (THAT WILL MAKE YOU WANNA DITCH YOUR OLD BULKY WAH PEDAL), HONEY WAVES OF LFO OR OVER FIFTY THOUSAND VERY MUSICAL RANDOM PATTERNS. THREE MODES OF MODULATED AMPLITUDE CAN CREATE THE CROSS-TREMOLO, TRADITIONAL TREMOLO OR VOLUME SWELLS.

TO TOP IT OFF, THIS ANALOG BEE IS DIGITALLY PARASITIZED AND INCLUDES TAP-TEMPO FUNCTION, CV CONTROL, EXTERNAL TAP, EXPRESSION OUT AND CAN SAVE PRESETS.

Video Manual

Demo by Beetronics

ZZOMBEE FILTREMULATOR

The Phase 99 combines two Phase 90 circuits in a single housing with Modern/Vintage, Series/Parallel, and Sync switches for ultimate phaser experimentation.

 

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

Product Page 

Product Manual 

Product Demo 

Phase 99

The Centura is a true overdrive pedal, enhancing the tone and capability of your amp. Highly acclaimed one-one recreation of the Klon Centaur circuit.

Ceriatone

Review by Pedal of the Day

Manual Page 3

Manual Page 2

Manual Page 1

Demo by TheKlonWars

Demo by Andrew Cheng

Centura overdrive raw/clear coat version

Dan here, Mick here – hello!

We have a deep love for the harmonic tremolo’s unique modulation character: a little bit phase-y and a little bit pulsing. It can add a complete, enveloping texture over your whole guitar tone, or sit more subtly as a fantastic ‘widening’ effect either straight mono or in a wet/dry rig.

We wanted to address some of the issues we found in our other favourite examples of the effect and add a superb amplitude trem to boot; enter the Harmonious Monk, a collaboration between JAM pedals and That Pedal Show!

The Harmonious Monk uses all-analogue circuitry with two selectable LFOs providing varying levels of modulation intensity, available in both Harmonic and Amplitude modes: essentially four core sounds. We have included both depth and mix controls, so you can get it sat just right in your overall tone.

Subtle (-) setting in Amplitude mode offers a plethora of vintage-inspired tremolo tones with all the same adjustability as Harmonic mode. Intense (+) setting brings the chop! Stuttering, staccato pulses that add drama and rhythm to your music right up to a fast warble that can sound truly otherwordly.

We also added a footswitch so you can access two tremolo speeds instantly in any mode; internal trimmers to shape the EQ to your liking, and the ability to either boost or cut the overall output level to suit your rig and other pedals.

The Harmonious Monk covers a huge amount of sonic ground and it will inspire you towards a whole new palette of sounds, textures and music.

We summoned the Harmonious Monk from the waves of JAM pedals' sonic ocean so that we can all bathe blissfully in its glorious undulating tones. Let there be wobble!

Jam Pedals

Harmonious Monk mk.1

PedalSafe Type B3

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale, Mooer GL 100

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals, Mooer GL 100

Schutzabdeckung & RockBoard-Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS MAKKO D1 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & Universal Mounting Plate For WALRUS MAKKO D1 pedals

Mit einem sorgfältig abgestimmten, zusätzlichen Mittenfrequenzregister liefert der Tubedreamer einen warmen und satten Overdrive-Sound über jeden Verstärker.

Ein entscheidender Unterschied zwischen dem Tubedreamer und anderen Tubescreamern ist unsere Entscheidung für 3 Dioden für asymmetrisches Clipping anstelle von symmetrischem, wodurch die Reaktion des Pedals auf Nuancen von Bundieren und Zupfen verbessert wird.

Der Tubedreamer verwendet den legendären JRC4558D-Chip, um seinen klassischen Sound zu liefern, genau wie bei den originalen, begehrten 808ern, und führt außerdem einen größeren Verstärkungsbereich ein, der über den Kippschalter für die Hochverstärkungsstufe zugänglich ist.

With a carefully tuned, added midrange frequency register, the Tubedreamer delivers warm and rich overdriven sound through any amp.

A pivotal difference between the Tubedreamer and other Tubescreamers, is our choice to go with 3 diodes for asymmetrical clipping instead of symmetrical, enhancing the responsiveness of the pedal to fretting and picking nuances.

The Tubedreamer employs the legendary JRC4558D chip to deliver its classic sound, just like in the original, sought-after 808’s, and also introduces a wider gain range accessible by the high-gain-stage toggle-switch.

Demo by Alberto Barrero

Review by The Gear Page

Review by Squid Ink Guitar

TubeDreamer 58

PedalSafe Type A1.1

QuickMount Type A

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Comprised of photocells, a bulb, original NOS 2SC828 transistors and carbon comp resistors, the RetroVibe delivers the majestic sounds of the best Uni-Vibe pedals from back in the day, but housed in a modern pedalboard-friendly enclosure and featuring standard 9V DC operation internally lifted to 15V DC.

Choose between the Vibrato and Chorus settings and navigate from slow-rate wavy sounds all the way to fast Leslie-speaker effects!

Use it with any common passive 10k Expression pedal in conjunction with a standard TRS cable for real-time Speed control.

Review by Musiker-Board

Demo by Mikel Bluni

RetroVibe mk2

PedalSafe Type C

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

The Ernie Ball VP Jr 250k provides all the same great features as our original volume pedal while reducing your footprint by 22%. The VP 250k Jr is perfectly voiced for passive signals and features a compact, rugged design consisting of aircraft grade aluminum housing that is virtually indestructible. Directly behind the input jack under the footplate is a micro taper switch which provides the user two distinct volume swell rates.

Ernie Ball

Demo by Long & McQuade 

6180 VP JR. 250K

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Kemper Player Board

Alvin Povo

GET THE MOST OUT OF YOUR KEMPER PROFILER AND REMOTE.
The linear potentiometer is matched exactly to the specifications of the Kemper Profiler for precise and natural response. The standard pedal has a toe switch to turn effects on and off without requiring a separate footswitch.

The optional spring load omits the physical toe switch. The spring always returns the pedal to heel down and is used with the Profilers auto-on function to automatically turn the wah effect on and off when moving the pedal.

The EP1-KP is available in green or black finish, and works with the rack and head versions, the Remote floor controller and the Stage.

Mission Engineering

EP1-KP-GN

Jeremie volant

Geballte MIDI-Kontrolle im Handtaschenformat - von Pedalboard bis DAW

Morningstar Engineering

Review by AMAZONA 

Demo by Mark Johnston 

Demo by Morningstar Engineering 

Das Tone City Sweet Cream ist ein Low-Gain Overdrive Pedal mit einer super smoothen, Verstärker-ähnlichen Ansprache. Das Pedal lässt sich für satt verzerrte Sounds hervorragend mit anderen Drive Pedalen stacken oder kann verwendet werden, um Clean Sounds einen kontrollierbaren, berührungsempfindlichen Overdrive zu verleihen. Das Sweet Cream ist auch ein perfektes Werkzeug, um bereits verzerrte Verstärker in die Sättigung zu bringen, um einen kräftigen, cremigen Drive Sound zu erzeugen. Der einzigartige Touch-Regler passt das grundlegende 'Feeling' und die Dynamik des Pedals sowie das allgemeine Tone-Setting an, anstatt wie ein klassischer Tone-Regler nur mit einem Treble Cut zu arbeiten.

The Tone City Sweet Cream is a low-gain overdrive pedal with a super smooth, amp-like response. The pedal stacks extremely well with other drive pedals for rich distorted sounds or can be used to give your clean signal a controllable, touch-sensitive overdrive. The Sweet Cream is also a perfect tool to push already driven amplifiers into saturation for a thick, creamy drive sound. The unique Touch control adjusts the general feeling and dynamics of the pedal as well as the overall tone setting, instead of just rolling of the high-end like a standard Tone control.

Tone City

Tone City Sweet Cream - Demo Video - W-Music Distribution

Tone City Sweet Cream - Demo Video - Andertons Music Co

Tone City Sweet Cream - Demo / Review Video - intheblues

Tone City Sweet Cream - Demo / Review Video - Have Guitar

Tone City Sweet Cream - Demo Video - Budget Pedal Demos

Tone City Sweet Cream - Demo / Review Video - gearmanndude

Tone City Sweet Cream - Demo / Review Video - The Tone King

Sweet Cream

Don Jordan

Das TS Mini ist eine kompakte Version des legendären Overdrive-Pedals von Ibanez aus der Tube Screamer-Reihe. Es bietet die klassischen Regler für Drive, Tone und Level in einem Gehäuse mit etwa halber Größe des Originals. Es verwendet True-Bypass-Schaltung und eine vollständig analoge Elektronik, um den saubersten Signalweg zu gewährleisten. Es ist für Pedalboards mit begrenztem Platz konzipiert, ohne den typischen Mitten-Boost-Charakter der Tube Screamer-Serie zu verlieren.

The TS Mini is a compact version of Ibanez’s legendary Tube Screamer overdrive pedal. It delivers the same classic drive, tone and level controls in a form-factor roughly half the size of the original. It uses true-bypass switching and 100% analog circuitry to preserve the cleanest signal path. It is optimized for pedalboards where space is at a premium while retaining the characteristic “mid-hump” overdrive that made the Tube Screamer family iconic.

Ibanez

Demo by Andertons Music Co

Demo by Marty Music

Review by Music Radar

TS Mini

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

StroboStomp HD

Carlos  Steinmann

TT-2

dylan levan

Der KEMPER PROFILER Player ist die neueste und umfassendste Auswahl an professionellen Amp-Sounds und FX in Studioqualität pro Stellfläche. Der PROFILER Player benötigt nur die Stellfläche von zwei Standard-Verzerrungspedalen und verwandelt jedes Pedalboard in ein Touring-Rig in Arena-Qualität. Und was noch wichtiger ist: Der Player selbst ist bereits das Touring-Rig in Arena-Qualität, das in jede Gitarrentasche passt. Er bietet das gesamte Arsenal an KEMPER-Amp-Sounds (ja, der Amp-Bereich des Players klingt identisch mit dem Amp-Bereich seiner berühmten großen Brüder – er lädt jedes Amp-PROFILE aus der riesigen Bibliothek bestehender kostenloser und kommerzieller PROFILE), ausgewählte FX-Einstellungen, IR-Lade- und Umschaltfunktionen – zu Hause, im Studio, im Proberaum und auf der Bühne.

The KEMPER PROFILER Player is the latest and the most complete serving of professional amp tones and studio-grade FX per footprint. Requiring only the floorboard space of two standard distortion pedals the PROFILER Player turns any pedal board into an arena-grade touring rig. And, what’s more, the Player indeed itself is already the arena-grade touring rig that fits in every guitar bag. It offers the full arsenal of KEMPER amp tones (yes, the Amp section of the Player sounds identical to the amp section of its famous Big Brothers - it loads any amp PROFILE from the vast library of existing free and commercial PROFILEs), selected FX settings, IR loading, and switching capabilities - at home, in the studio, in the rehearsal room, and on stage.

Kemper

Demo by In The Blues

Demo by Ola Englund

Review by Guitar World

Profiler Player

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Bee ready to enter a new phase. The Morphing Phase.
Meet the LARVA Morphing Phaser.
A 6-stage analog phaser, vibee and preamp with morphing capabilities.
It features two independent phaser settings, allowing you to create unique sounds and transitions. You can use it as a straightforward phaser, set up two different phaser presets, or morph between them for creative soundscapes.

Inspired by the classic Moogerfooger line, the Larva preamp enhances phase and vibe tones with subtle warmth or bold lead power—and it’s so good, that we made it so you can use it on its own.

Review by AMAZONA

Review by gearnews

Review by Stompbox Steals

Demo by Kris Barocsi

Review by delicious audio

Larva Morphing Phaser

Der Overhive ist ein extrem vielseitiger Overdrive mit mittlerer Verstärkung. Sein runder und warmer Ton respektiert Ihren Verstärker, verstärkt seine besten Eigenschaften und reagiert dynamisch auf Ihr Spiel.
Dieses Pedal erreicht den schwer fassbaren Overdrive mit mittlerer Verstärkung, ohne dass Sie eine Trennung zwischen Ihnen und Ihrem Verstärker spüren. Ihr Sound bleibt druckvoll und direkt mit einem warmen, musikalischen Break-up und singendem Sustain.
Die Bedienelemente bieten Ihnen nahezu unbegrenzte Möglichkeiten. Während der „Body“-Schalter großartig ist, wenn Sie die Gitarren in einem Set wechseln oder einfach nur einen Bass-Boost hinzufügen möchten, können Sie mit dem „Hive“-Schalter Ihren Sound größer und fetter oder straffer und dünner klingen lassen. Der „Honey“-Regler fügt nur das Zuckerstück hinzu. Drehen Sie ihn herunter für ein schönes und sanftes Knirschen oder drehen Sie ihn hoch für ein sanftes und dynamisches Drive, bei dem Ihre Hände das Break-up bestimmen. Sie haben auch einen Klangregler und eine Master-Lautstärke.
Bei so vielen Möglichkeiten ist es schwer, keinen Platz dafür auf Ihrem Board zu finden. Es ist wirklich ein Bienenstock süßer Töne.

The Overhive is an extremely versatile medium gain overdrive. It’s round and warm tone respects your amp, enhancing it’s best qualities while dynamically reacting to your playing.
This pedal achieves the elusive mid-gain overdrive without making you feel a disconnect between you and your amp. Your sound remains punchy and direct with a warm musical break up and singing sustain.
The controls give you nearly infinite possibilities. While the "Body" switch it's great for when you are switching guitars on a set or just feel like adding a low end boost, the "Hive" switch can make you sound bigger and fatter, or tighter and thinner. The "Honey" control just adds the sugar. Roll it down for a nice and smooth crunch, or roll it up for a smooth and dynamic drive, where your hands dictate the breakup. You also got a tone control and master volume.
With so many possibilities, it's hard to not find a place for it on your board. It's truly a hive of sweet tones.

Overhive

The Royal Jelly is an overdrive/fuzz blender like no other pedal. It can cover any ground from overdrive to fuzz, running two circuits in parallel and giving you the possibility of blending it or having them separately. It also has two presets of the blend, called Queen and King. The presets allow you not only to have two different sounds on the fly, but also make for a very natural transition between them, since instead of switching pedals, you are mixing the levels between your overdrive and fuzz.
It’s also possible to blend in your dry signal, a great feature for bass, drums and synths or any studio use. On the guitar the DRY control is great to create unique clean tones with a fuzzy background.