andronik supersonik

cavebitch-2

Suwannaphum Padsapan

REDDI is a fire-engine red tube direct box with an unquestionable quality of sound. This is best foot forward in giving the audio world a truly remarkable product at an affordable price.

The REDDI has been field tested and referred by recording engineers to be the "best tube DI ever made".

With wider bandwidth and just the right amount of gain, the REDDI stands clear and clean above the competition.

Great for Basses, Guitars, Synths and electronic instruments that require a direct box for recording, the REDDI is READY to give you unsurpassed sound for that perfect recording or live performance.

A-Designs

REDDI

Tester

BOSS

TU-3S Tuner

The micro-Thumpinator is a bandwidth optimizer designed for bass guitar. It removes the low frequency signals that are outside the range of notes produced by the instrument.

Infrasonic frequencies cannot be reproduced by standard bass cabinets but they often make amplifiers clip, especially when they are set to boost the lower frequencies. The Thumpinator filters the signal content optimising the energy delivered by the amplifier. Low-frequency clip is substantially reduced and the sound is tighter especially at high volume levels.

The micro-Thumpinator accepts instrument and line level signals. It can be used between preamplifier and amplifier, between bass and amplifier or anywhere in the effect chain (line or instrument level). It can also be connected directly to an audio interface.

SFX Sound

Product Page

Review by Talk Bass.com

Demo by Paul Reich

Official Product Video

micro-Thumpinator v2

Andrea De Blasio

Die dänische Company Caveman Audio um Steen Skrydstrup hat es sich zur Aufgabe gemacht, die weltweite Bassistengemeinde mit Boutique-Equipment zu versorgen, welches selbst höchsten Ansprüchen Genüge tut. Die Zeichen stehen gut, kann Mastermind Skrydstrup doch auf eine mehr als 25 Jahre umfassende Erfahrung im Bereich der Herstellung von Custom-Equipment für bekannte Musiker wie Steve Morse, Rammstein, Steve Stevens, The Edge oder The Scorpions zurückblicken. (Alle Bilder zur Verfügung gestellt von Caveman Audio)

BP1 crams the preamp and output stage from our BAS1 Bass Preamp System into a compact stompbox format with zero sonic compromises.
The BP1 adds definition in the Low mid-section to your bass sound. It will make your sound sit in the mix with the right definition and tons of dynamics.
With the built-in transformer balanced, studio-quality DI, you will no longer have to use low-quality DI’s at venues that make your bass sound dull, two-dimensional, and uninspiring.

Caveman Audio

Review by bonedo 

Review by Sound on Sound

Manual

Demo by Caveman Audio

BassTheWorld tests BP1

BP-1 Bass Preamp

Teeratai Kaewmanee

 
BC1 is not like the standard bass compressor pedal. Not by a longshot!
We like the idea of using a compressor as an always-on Master Compressor – at the end of the signal chain. A compressor that tames and gently shapes the overall dynamics, giving you a pristine bass tone that makes you sound better, sit better in the mix and simply makes playing more fun!

BC1 is a 100% analog Master Compressor that makes the output from your strings more even and brings out all of the small nuances in your playing.

Quick Start Guide

BC1 Bass Compressor

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

caleb carter

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Sandbox Pedal Board

Marc Menickella

Goodwood Audio

Lift - 16"

Lift - 12"

DITTO LOOPER is the looper you will try once and love for life – and you’ve gotta try it. We’ve built onto all that is good about the best loopers, trimmed all the nonessential, mood-killing tech hoopla, and designed a 5-minute looper that is intuitive, tons of fun, sounds great – and won’t break the bank!

TC Electronic

Review by Gustavo Pereira, guitarspace.org

Review by Mudskipper, bassic.de

Demo by Sweetwater

Demo by Aaron Short Music

Ditto Looper

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

David Graves

The Bassbone OD is a powerful two channel instrument preamp that is
able to handle all types of instruments, depending on how it is configured. 
Using the Bassbone OD is fairly straight forward. Each channel is equipped with a series of controls for volume, EQ and filtering so that each instrument or pickup type can be optimized for tone or accentuated for a specific need. One can select between channels using the A/B footswitch or combine the two channels when using an instrument that employs both magnetic and piezo transducers. What makes the Bassbone OD truly unique is the way it is able to incorporate effects pedals into the signal chain. These can be active all the time, bypassed using the overdrive footswitch, or combined with the built-in overdrive to create exciting new tones.

Radial Engineering

Review by Guitar Chalk

Demo by Pertybass

Demo byDeadbeat Studios

Bassbone OD

WangKi Cheung

Aguilar DB 316 Eigenschaften:
Liefert intuitive Mittenregelung für 2-Band-Preamps, ohne dass Modifikationen am Bass notwendig sind
Verbessert die Mittenwiedergabe passiver und Vintage-Instrumente
Einfaches Umschalten zwischen Slap- und Fingerstyle-Spielweise
Ergänzt Verzerrungs- oder Fuzz-Effekte
Kompaktes Design passt auf jedes Pedalboard


Aguilar DB 316 Features:
Delivers intuitive midrange to 2-band preamps without the need for bass guitar mods
Enhances midrange detail of passive and vintage instruments
Easily switch between slap and fingerstyle tones
Complements distortion or fuzz effects
Compact design easily fits any pedalboard

Aguilar

Demo by Algam Benelux

Review by Bass Musician Magazine

Review by Gear News

DB 316 Mid Range EQ

David Litaba

Designed with our friends at Pedaltrain®, the Volume (X)8 Pedal allows for the most efficient layouts on Metro Series and other popular pedalboards. Once you're all set up, step on this pedal to create incredibly smooth volume swells or control your favorite FX parameters with the road-proven, patented Low Friction Band-Drive. Internal controls set the expression mode's minimum effect level parameters and the rocker's heel/toe polarity. Features Volume, FX, Output, and Tuner jacks.

Dunlop

Demo by PMTVUK

Review by Guitar World

Review by reddit /guitarpedals

VOLUME (X) 8 PEDAL (DVP5)

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Nathan Rapheld

Seit über 75 Jahren vertrauen einige der größten Namen auf der Bühne und im Studio auf Peterson als Maßstab in Sachen Stimmpräzision. Der StroboStomp Mini™ bietet die unübertroffene Stimmgenauigkeit von 0,1 Cent aller authentischen Peterson Strobe Tuner im Format eines Mini-Pedaltuners. Mit einem hochauflösenden LCD-Strobe-Display mit variabler LED-Farbhintergrundbeleuchtung klingen Ihre Instrumente nie besser gestimmt. Ein True-Bypass-Modus ohne Knackgeräusche und ein gepufferter Ausgabemodus geben Ihnen die Kontrolle über Ihren kostbaren Klang ohne Kompromisse. Mit über 80 exklusiven Sweetened Tunings® und Guided Tunings an Bord können Sie Ihren Sound einstellen und stimmen wie die Profis!

For over 75 years, Peterson has been trusted by some of the biggest names on stage and in the studio as the standard in tuning precision. The StroboStomp Mini™ delivers the unmatched 0.1 cent tuning accuracy of all authentic Peterson Strobe Tuners in a mini pedal tuner format. Featuring a high-definition LCD strobe display with variable LED color backlight, your instruments will never sound more in tune. A pop-less true bypass mode and a buffered output mode place you in command of your precious tone without compromise. With over 80 exclusive Sweetened Tunings® and Guided Tunings on-board, you'll be able to dial in your sound and tune like the pros!

Peterson

Review by guitar pedal X

Demo by The Time Preservation Society

Strobostomp Mini

Kompressor Pedal für E-Bass
CHT "Constant Headroom Technology" für klare und saubere Tonqualität
Regler für Output, Input, Release, Attack und Ratio 
Led Kette mit 10 LED für "Gain reduction" Anzeige
Status-LED
True Bypass
stabiles Metallgehäuse
Betrieb mit 9V-Batterie oder Dunlop ECB-003 AC Adapter (optional)
Made in USA


Take your favorite studio compressor to the stage with the MXR M87 Bass Compressor. A complete array of controls (Attack, Release, Ratio, Input, and Output) makes it easy to fine-tune your sound, from subtle peak limiting to hard squashed compression effects. Its Constant Headroom Technology gives you plenty of headroom and clear performance. This totally transparent compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten, highly visible gain-reduction status LEDs. It´s all packed into a durable, lightweight aluminum-housing pedal that´s the size of a Phase 90.

Official Product Page

Review by awkwardsounds

Review by PREMIER Guitar 

Review by Compressor PedalReviews

Official Product Video 

Demo by Bass The World 

M87 Bass Compressor

Der Sadowsky SBP-2 Bass Preamp bietet Bassisten die gleiche Elektronik, die seit über 30 Jahren in jeden Sadowsky-Bass eingebaut ist. Das Preamp Pedal eignet sich perfekt um im Effekt-Setup im Front End des Verstärkers genutzt zu werden. Die Regelmöglichkeiten sind mit Volume, Treble und Bass bewusst einfach gehalten, dabei arbeiten Treble und Bass ausschließlich als Boost. Der SBP-2 Bass Preamp ist die perfekte Wahl um alte Vintage Instrumente aufzuwerten, bei denen man die originale Elektronik nicht verändern möchte. Die besten Ergebnisse erzielt man mit passiven Bässen oder Schaltungen mit aktiven Tonabnehmern, in denen man die aktive Elektronik umgehen kann. Der SBP-2 Bass Preamp harmoniert außerdem perfekt mit Upright-Bässen.

The Sadowsky SBP-2 Bass Preamp offers bassists the same electronics that has been built into every Sadowsky bass for over 30 years. The preamp pedal is perfect for the use in the effects setup in the front end of the amplifier. The control options are kept simple with Volume, Treble and Bass, Treble and Bass only work as a boost. The SBP-2 Bass Preamp is ideal for upgrading old vintage instruments where you don't want to change the original electronics. The best results are achieved with passive basses or circuits with active pickups, where you can bypass the active electronics. It also works great with all upright bass pickups.

Sadowsky

Sadowsky SBP-2 - Official Demo Video

MAKE ANY PASSIVE BASS ACTIVE!!! With the Legendary SADOWSKY PREAMP Pedal SBP-2! - Sadowsky

Sadowsky SBP-1 / SBP-2 - Demo / Review Video - Reverb

Sadowsky SBP-2 - Demo / Review Video - Andy Irvine

Sadowsky SBP-2 - Demo / Review Video with Alfredo Dini - Goldmusicsrl

Sadowsky SBP-2 - Bass Preamp - Review by Bonedo [DE], [12-2021]

Sadowsky SBP-1 / SBP-2 - Bass Preamps - Review by Gitarre & Bass [DE], [05-2020]

Sadowsky SBP-1 / SBP-2 - Bass Preamps - Review by BassProfessor [DE], [02-2020]

SBP-2 Bass Preamp

ch ray

Line 6 HX Stomp ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Review by bonedo

Review by Gitarre & Bass

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Black

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

CIOKS

DC 7

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Der RockBoard Pedalboard Drawer ist eine simple aber extrem effiziente Lösung zum Organisieren und Verstauen von optionalem Zubehör in einem RockBoard Pedalboard. Der Pedalboard Drawer wurde entwickelt, um Zubehör wie Kabel, Plektren, Wireless Systeme und vieles mehr im MOD Slot des Pedalboards aufzubewahren. Durch den zentralen Zugang auf der Front des Pedalboards bietet der Drawer einen sichereren, sauberen und einfach zugänglichen Platz zur Aufbewahrung direkt am Setup. Durch die intelligente Arretierung der rotierenden Schublade ist eine zusätzliche Sicherung nicht notwendig.

- rotierende Schublade für RockBoard Pedalboards
- intelligenter Drehmechanismus mit sicherer Arretierung
- für Zubehör, Kabel, Wireless Systeme, Plektren, etc.
- passt in die MOD-Slot Aussparung von RockBoard Pedalboards (außer RockBoard DUO 2.0, 2.1, und 2.2)
- Material: Verstärktes Polyamid
- inkl. Montagematerial und Werkzeug
- Maße (B x T x H): 175 x 84,5 x 47 mm
- Gewicht: 150 g
- schwarz
- Hinweis: Nicht kompatibel mit den 19" Rack Panel Single oder Double (1U) - Rack Mount for RockBoard MOD

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.

- rotating mounting drawer for RockBoard pedalboards
- intelligent swivel locking mechanism
- for accessories, cables, wireless systems, etc.
- fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3)
- material: reinforced polyamide
- incl. all mounting screws, counter nuts, and tools
- dimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"
- weight: 150 g / 0.33 lbs
- black
- Note: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MOD

Rotating Drawer for RockBoard Pedalboards

BASS TUBE

Branislav Vukobratovic

Die Cioks DC7 Mehrfach-Stromversorgung für Effektpedale stellt im Vergleich zu anderen Geräten dieser Art jeder Menge Energie bereit. Und das in einem flachen Gehäuse, das sogar unter ein Pedaltrain Nano Board passt. Das stattliche Kraftwerk bietet laut Angaben des dänischen Herstellers bei 9 Volt massive 4620 mA Strom und wäre damit rein rechnerisch in der Lage, ca. 577 Tubescreamer-Pedale (!) in Betrieb zu halten.

If you use effects pedals, whether on stage or in the studio, running them from a high-quality power supply is essential to getting the best performance and lowest noise out of them. The best power supplies have regulated, electrically isolated outputs, and that gives the same electrical separation as when running the pedals from batteries — but without the obvious disadvantages! There are several excellent power supplies available that offer such features, but CIOKS have managed to come up with an incredibly compact solution, seemingly without compromising on quality or flexibility.

Demo by The Pedal Zone 

Demo by CIOKS 

Review by

Christopher Garrison

CIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal. Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go. 

Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for instance four for a Neural DSP Quad Cortex and two outlets for a Line HX Stomp), allowing you to run more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable setup and gives you more options for connecting additional pedals.

Crux

Janez Jelen

Introducing a brand new version of the Oracle - a single channel, vacuum tube pre-amplifier inspired by the iconic Portaflex Bass amps of the 1960's. The buffered 1/4" output provides ample gain to feed a modern power amp or the line input of your recording interface. For use as an effect pedal, simply turn down the Master control (all knobs at noon is unity gain). The DI output features a high quality output transformer, with Mu Metal shielding for ultra quiet operation.

The heart of the Oracle is a single 12AX7 tube, selected for low noise and good tone, and fed by a 300VDC power supply.

Arkham Sound

Review by CompressorPedalReviews

Demo by Low-End Reviews

Review by reddit /basspedals

Review by Bass Musician Mag

Oracle

Ruben Shannon

The Effectrode® ‘LA-1A’ Leveling Amplifier is a high-end, studio-grade vacuum tube compressor in a pedal. Whisper-quiet operation and a wide, wide dynamic range make this tone-tool an unparalleled tone enhancer on stage and in the studio—its natural warmth and clarity are unmatched.

Effectrode

Demo by Mike Hermans

Demo by Electric Mojo Guitars

Review by loopersparadise

LA1A Levelling Amplifier

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

TU-3W Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

REDDI von A-Designs